WBPWD/AE/CKHSD I/NIeT47/25-26_6

Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).50 mm dia

25 mm dia

20 mm dia

Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(ii) 550 mm X 400 mm size

Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.(iii) 900 mm long

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of painting to bracket etc.

Opening out leaky water supply pipe and making the joints water tight (i) up to 40 mm dia

50 mm dia

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 600 mm long

Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good.15 mm

Supplying, fitting and fixing Waste fittings complete.(a) C.P. over brass (ii) 32 mm

Renewing brass spindle and valve of stop cock/bib cock/push cock/pillar cock 15 mm

Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C.ii) Plastic (hallow type) white

Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm

Supplying, fitting and fixing C.P. Extension Pipe

(vi) 5 MT load bearing capacity round manhole cover provided with two lifter hooks fitted with matching frame of sizeCover: 565 mm X 65 mm Frame: 665 mm X 125 mm opening: 470mm Weight: 90 kg (approx)

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer. (d) 2000 litre capacity

Supplying, fitting and fixing low-down cistern parts. (i) Internal fittings for cistern complete of approved make

(vi) Brackets (pair)

Supplying, fitting and fixing C.I. bracket including two coats of painting(a) Wash basin, Dental spitton

(b) Sink, Drain board

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete

Labour for hoisting plastic water storage tank (ii) Above 1500 litre upto 5000 litre capacity.(a) Upto 1st story from G.L.

(b) Extra for each additional story

Changing the lather only of syphon of automatic cistern including taking out and refixing necessary parts

Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

b) PTMT Pillar Cock - 15 mm. (Prayag or equivalent).

Supplying, fitting and fixing towel rail with two brackets(a) C.P. over brass(ii) 25 mm dia. and 600 mm long

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(b) 110 mm

(B) fittings (iii) Door tee(b) 110 mm

xi) Door bend (T.S) (b) 110 mm

xvi) pipe clip (b) 110 mm

xxi) 110 x 110 P Trap 75 mm

Supplying, fitting and fixing shower of approved brand and make(f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).

(h) Polythene overhead shower of approved make 15 mm X 125 mm

)Supply of Plumbing Mistry for repairing works

Supply of Plumbing Helper for repairing works

Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-incharge.ge

B)Labour For Shifting

Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets (a) Sink only(i) 530 mm X 430 mm x 180 mm

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing)(ii) 530 mm X 410 mm

Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand).

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

(e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm ATLAS or equivalent) 15 mm

(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO / ATLAS or equivalent) 15 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above groundFor Exposed Work PVC Pipes.80 mm

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.(a) With 'P' trap

Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps completei) Polythene Flush Pipe

Supplying, fitting and fixing in position reinforced cement polymer concrete manhole /gully pit cover with matching frame.As per I.S-12592(M.D) (viii) 5 MT load bearing capacity gully pit cover with frame and hinge arrangement for opening of sizeCover: 470 mm X 420 mm X 80 mm Frame: 590 mm X 550 mm X 170 mm opening: 380mm x 305mm Weight: 100 kg (approx)

Please Enable Macros to View BoQ information