PETTY DAY TO DAY B/R REPAIRS AT TECH AREA/KALUCHAK OF AF STN JAMMU UNDER GE AF JAMMU

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone-work and precast concrete articles complete all as specified and as directed by Engr-in-Charge.

Taking down cement or cement lime plaster, any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including cutting , shrubs or any type of vegetation upto and including roots complete including removal all debris exceeding 50m but not exceeding 100m all as specified and directed by Engr-in-Charge.

M&L brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and as directed by Engr-in-Charge.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified and directed.

Description all as per ser no-03 above but except bricks using old servicable bricks as retrieved from dismantling in respective items complete all as specified and as directed by Engr-in-Charge.

Rendering 10mm thick on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar 1:6, complete all as specified and directed by Engr-in-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces, other than fair face (without using extra cement) on walls in cement mortar 1:4 including WPC complete all as specified and directed by Engr-in-charge. Note: Supply only liquid water proofing admixture shall be measured and paid seperately

Rendering 5mm thick on fair faces on concrete surfaces/ ceiling, finished even and smooth (without using extra cement) on walls in cement mortar 1:4, complete all as specified and directed by Engr-in-Charge.

Supply only liquid water proofing admixture complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and removing demolished material to a distance and depositing to the distance exceeding 50 metres but not exceeding 100 metres where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate in roof kerbs or mud stops, kurb stone coping cill similar bends Plinth course , rounded or chamfered on edge including necessary form work complete all as specified.

25 mm thick, plain cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in sub base for laying floor finishes including finishing the surfaces even and rough without using extra cement, complete all as specified and as directed by Engr-in-Charge.

M&L15 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified and directed by Engineer-in-Charge.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 Square metre but not exceeding 0.11 Square metre, in floors etc. set & jointed in neat cement slurry and pointed in coloured cement to match coloured tiles complete all as specfied and directed.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 Square metre but n exc 0.18 square metre in floors etc set and jointed in neat cement slurry and pointed in colored complete all as specified and directed.

M & L glazed ceramic tiles coloured (350x250x7mm/ 450x350x7mm) for works on vertical surfaces such as skirting/dados of economy class B-III conforming to IS-13712 etc set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3, as in backing layer without using extra cement complete all as specified.

M&L glazed ceramic tiles coloured 300x200x7 mm thick for works on vertical surfaces such as skirting/dados set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10 mm thick in cement mortar 1:3 as in backing layer without using extra cement complete all as specified.

M&L for colored non skid ceramic tiles 7to 8 mm thick area of each tile exc 0.11 Square metre but n exc 0.18 Square metre in vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in coloured cement including rendering 10 mm thick in cement mortar 1:3 as in backing layer without using extra cement complete all as specified coplete all as specified and directed.

M&L for vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for vitrified ceramic coloured tiles 10mm thick (square/ rectangular) polished area of each tiles not exc 0.36 sqm in vertical surfaces as in skirting etc set and jointed in neat cement slurry and pointed in coloured cement including rendering 10 mm thick in cement mortar 1:3 as in backing layer without using extra cement complete all as specified complete all as specified and directed.

Preparing plastered or unplastered surfaces of old decorated walls/roof/ceiling and applying one coat of "AQUA Crete paint" complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of new plastered surfaces and applying three coat of lime white wash on walls, all as specified.

M & L for preparation of new plastered surfaces and applying three coat of lime white wash on ceiling, all as specified.

M & L for preparation of new plastered surfaces and applying two coat of approved shade of oil emulsion distemper over a coat of primer on walls all as specified and directed.

Preparation of newly plastered surfaces of walls and applying acrylic smooth exterior paint of required shade : new work (two or more coats applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm in any tint, over a coat of primer (as per manufacturer's instruction of Apex) over and including one coat of birla 2mm thick white wall care putty, as on melbow width like wall, roof projection, facias, chhajja, etc all as per manufacturer's instructions all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surfaces of walls and applying acrylic smooth exterior paint of required shade : new work (two or more coats applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid dry and pointed complete all as specified and directed by Engr-in-Charge.

Demolition of reinforced cement concrete in any position not otherwise specifically provided, complete all as specified and directed .

M&L for reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate for slabs supported on wall, beams and columns, in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like ,complete all as specified and directed Note : Reinforcement shall be measured and paid for separately.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specfied .

M&L 20 mm thick screed bed or bedding layer in CM 1:6 finished fair and even for laying floor finishes/tiles etc complete all as specified.

M&L for granite work 18-20mm thick (table rubbed and polished) in cooking platforms over 10mm thick screed bed in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as per specified and as directed.

M&L for steel reinforcement 10mm dia and over, TMT bars, cut to length, bent to shape required including, cranking, bending, spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed .

Taking down wooden shutter of any description exc 1.00 Square metre but n.exc 2.00 Square metre easing and adjusting and then refixing shutters with old builder hardware as required in the same opening complete all as specified and directed.

Taking down wooden shutter of any description exc 1.00 square metre but n.exc 2.00 square metre, each (with all fittings) complete all as specified and directed.

Taking down chowkat or frames (without taking off shutter) exc 1.50 sqm but n.exc 4.00 sqm each and removed from site complete all as specified and directed .

Taking down shutter of any descreiption n.exc 1 sqm each & removed from site complete all as specified and directed .

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n-exc 1.50 square metre each,complete all as specified and directed by Engineer-in Charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area n-exc 1.50 square metre each, including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.) adjusting and than refixing the same as required in other opening complete all as specified and directed.

Repair & refixing in same position of aluminium anodised door shutters of any description, size exceeding 1.50 Sqm but not exceeding 4.00 Square Metre by taking down/without taking off shutters from the frame, disconnecting carefully shutter member with deligated tools and as per manufacture's instructions. Removing broken aluminium mongeries, tilted/deformed aluminium beads, teared T rubber gasket and cleats in hollow blocks of rails and retightening in same position with excess sectional area steel screws incl tightening mild steel rod with nuts in hollow blocks of members of shutters of lock side rail and hinge side rails and reassembling shutter with old retrieved members carefully such as ACP panel/prelaminated board, tinted glass 5.5 mm thick in same situations and securing both side with supply and fixing new rubber T gasket and aluminium beads to making the door air tight including refixing of old aluminum hinge, tower bolt, mortice lock, bolts, handle, door stoppers, hydraulic door closer and refixing shutters in same opening after assuring complete alignment etc. Repairing floor spring where provided including making good alignments. Also adjusting door chowkats and frame and refixing with new rawl plugs & 3 to 4" long standard steel flat headed screws and assuring the strength of chowkats/frames before refixing shutters etc complete all as specified and directed.

S&F in repair anodized powder coated to (minimum thickness of powder coating 50 micron) of aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc, complete in all respect as per manufacturer's instruction and including making good disturbed surfaces complete all as specified and directed by Engineer-In-Charge.

S&F Anodised aluminium powder coated door (minimum thickness of powder coating 50 micron)shutters, fixed type with sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium fittings such as 150 mm long(4 nos) hinges, 200 mm long (2 nos) suitable handle, 250 mm long aluminium tower bolt (1 nos) , 140 mm long aluminium door stopper (1 nos) and anodised aluminum snap beading screws etc. with complete necesssary fittings all as specified.

S&F in repair powder coated aluminium window fixed type with three track (min 1.5mm thick) with three shutters made of 18 x 40 x 1.25 mm section (one for wire mesh and two for tinted glass) with rubber gasket beading and locking arrangement etc complete all as specified including 5.5mm thick tinted glass and wire mesh of size 0.56mm dia of wire and 1.40mm aperture including making good distrubed surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repair anodized aluminium powder coated window/ventilator side hung type without sash bars, aluminium sections weighing 0.55 Kg/ m (min 1.5mm thick) shutters including 5.5mm tinted glass with rubber gasket beading and locking arragement and wire mesh of size 0.56 mm dia of wire and 1.40mm aperture, jointing cleats, glazing clips, rubber packing, anodised aluminium fittings such as peg stays 150 mm long (1 no), hinges type B21, 100 mm long (2 nos) suitable handle (1 no) etc including making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

S&F for aluminium grill of oval shape aperture not exceeding 8 cm and with bar dia not less than 7mm fixing with all necessary fittings and fixture complete all as specified and as directed.

S&F for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers, exceeding 1.5 sqm, complete all as specified and as directed.

M&L for factory made steel windows box type conforming to IS-1038 with side hung shutters including box type hinges with 02 nos MS 100mm size barrel tower bolt for each leaf and Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of red oxide zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Glass panes shall be measured and paid for separately).

M&L for factory made steel windows box type conforming to IS-1038 with side hung shutters including box type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of red oxide zinc chromate primer complete all as specified and directed by Engineer-in-Charge. (Note :- Wire gauge shall be measured and paid for separately).

S&F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60 mm using 1.25 mm thick cold rolled mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60 mm using 1.25mm thick cold rolled mild steel sheets for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F for factory made 35mm thick 2nd class hard wood Plain, framed, panelled shutters, with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treatedmedium density, wood particle board with commercial face veneers fitted to chowkhat complete all as specified and as directed by Engineer-in-Charge.

S&F for factory made 35mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass/gauge etc divided into squares, with plain , chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of door shutters as specified in SSR Part-I sec 8 clause 8.20 (a), fixed to chowkhat all as specified and as directed by Engineer-in-Charge.

S&F Flush shutters 30mm thick solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Dismantling of timber scantlings in fillets, posts, raftars, purlins etc under 40 sqcm in section complete in unframed work.

M&L for plywood 12 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws/ nails to timber frame work in wall portion complete all as specified and directed by Engr-in-charge.

M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area exc 13 Sqcm and not exc 25 sqcm secured with nails complete all as specified and as directed by Engr-in-Charge.

M&L for 2nd class hard wood timber scantling plain fillets square, rectangular in section area n exc 3 Sqcm secured with nails complete all as specified and as directed by Engr-in-Charge.

S&F Ply wood 6mm thick 5 ply grade BWR, type BB, fixed with nails to timber frame work fixed in repair complete all as specified and directed.

S&F continuous (piano) hinges width of flaps 40 mm when opened, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F for Aluminium alloy butt hinges 100 mm long, ISI Marked, anodised, with galvanised mild steel hinge pin fixed in repair type- C 21 complete all as specified and directed.

S&F for Aluminium alloy, anodised, sliding door bolt, ISI Marked, 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for Aluminiun anodised barrel tower bolts, ISI Marked of extruded section of size 100mm fixed complete all as specified and directed.

S&F for Aluminiun anodised barrel tower bolts, ISI Marked of extruded section of size 150 mm long complete all as specified and directed.

S&F Mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

S&F for Aluminum anodized barrel tower bolts ISI Marked of extruded section 150 mm long, fixed in repairs complete all as specified and directed.

S&F for Extruded Aluminium alloy handle, ISI Marked, fabricated type, anodised 125 mm size, fixed complete all as specified and directed.

S&F for Aluminum anodized barrel tower bolts ISI Marked of extruded section 200 mm long, fixed in repairs complete all as specified and directed.

S&F for Floor door stopper of stainless steel with rubber of size 75 mm, chrome finished fixed in door complete all as specified and directed.

S&F Mild steel 300 mm ordinary rat rail rod pattern springs including roller and roller plate fixed in repair complete all as specified

S&F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair including taking down carefully aluminium door without damaging any member/part and re-fixing the same including easing complete all as specified and directed.

S&F for aluminium die cast body door closed hydraulically regulated designation No. 2 universal type (ISI Make) suitable for door shutters of weight between 36 to 60 Kg fixed in repair complete all as specified and directed.

S&F rubber door seal 32mm wide and 1.5mm thick strip of mild steel with hard brush fixed with machine steel screw with washer in door bottom fixed in repair complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth 0.56mm nominal dia wire and average width of aperture 1.18mm and fixed with tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified and directed.

S&F in repair 125mm hasp & staple safety type of aluminum with mild steel hinge including bolt to hinge plate and fixed with screw complete all as specified and directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed.

Hacking out old broken glass (any thickness size/ quality description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

S&F for 4.00 mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for 4.00mm thick figured type pin headed glass sheet ordinary quality and glazing with oil putty/ wooden beads with nails in square not exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for 4.00 mm thick sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square metre exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for 5.50 mm thick plain sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square n exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for 5.50 mm thick plain sheet plain glass ordinary quality and glazing with oil putty/ wooden beads with nails in square exceeding 0.5 Square metre in each pane etc complete all as specified and directed.

S&F for magnetic catcher with steel body ‘H’ type, fixed to shutter, fixed in repairs, complete all as specified and directed.

Supply and Fixing brass mortice lock four levers vertical type size 100mm or above fixed in repairs complete all as specified and directed by Engr-in-Charge.

Dismantling wall & ceiling boards (fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.

S&F for solid PVC wall lining consisting of 5mm thick prelaminated colour(natural wood effect) PVC sheet of density 600 Kg/cum inclusive of solvent cement solution and fiting at site on PVC frame as per specified in drawing and directed by Engr-In-Charge.

M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall with screws to make PVC frame as per specification and drawing.

M&L for 8 mm thick PVC laminated Gypsum ceiling board / tiles 595 x 595 mm in size, fixed in ceiling with screws to frame work with Aluminium grit frame work or GI channel powder coated at bottom , frame work complete all as per manufacturer instruction & complete all as specified and as directed.

S&F for Hangers 6 mm dia GI ( up to 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 X 3 mm size 60 mm long drawing complete all as specified and as directed.

Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel.

S&F for MS PVC coated brackets made in shape and size to hold certain rods and size of bracket 150mm colour and Pattern approved by GE complete all as specified and as directed.

S&F Drapery rod (MS conduit) of dia not less than 20 mm having a corrugated virgin PVC extrusion on it & finials of approved shade with standard MS powder coated/ brackets, fixed to walls with rawl plugs and steel screws, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F for end balls made in conical surface and coated with brown/cherry/Golden colour dia of ball not less than 50mm and suitable for curtain rod of 20mm dia fixed in repair complete all as specified and as directed.

S&F for rounded block made in round shape and coated with brown/cherry/Golden colour suitable for curtain rod 20mm dia fixed in repair complete all as specified and as directed.

Disconnecting existing tanks capacity of tanks exc 250 Litre and n.exc 500 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.

Disconnecting existing tanks capacity of tanks exc 500 Litre and n.exc 1000 Litre setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge.

S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 500 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

S&F Rotational moulded polyethylene water storage tank, inner and out white, two layers, ISI marked (cylinderical vertical with closed top) hoisted with Threaded Cap and fixed in position all as specified in SSR Part-I of Capacity 1000 litres each including all accessories (i.e GI nipples, etc), including provn of 20/15mm dia spout for connecting inlet, outlet, overflow and washout pipes, including taking down of old broken water tank complete all as specified and as directed by Engr-in-Charge.

S&F 20 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gram), complete all as specified and as directed by Engineer-in-Charge.

15mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 142 gram), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs PVC water tank cover for 500 Litre and 1000 Litre capacity including proper fixing with clamp & nut bolt complete all as specified.

Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

M&L for 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

Fixing only 15mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing for 20mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

M&L for 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors complete all as specified and dirceted.

Fixing only 20mm dia bore galvanized steel water tubing, “medium grade,” together with all fittings; (ISI marked) such as elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floor complete all as specified and dirceted.

S&F in repairs gate valve 20 mm, cast copper alloy, screwed down high pressure with crutch or butterfly handle etc complete all as specified and as directed.

Repairs to leaking water in pillar tap, stop cock, angle valve, bib taps of any description by replacing the washer complete all as specified and dirceted.

S&F Stop valve/cock, ISI Marked, cast copper alloy, screwed down, high pressure with handle, screwed end for iron pipe or for union and fixed suitable for 15 mm bore pipe fixed in repairs complete all as specified.

S&F in repairs Angle valve cast copper alloy chromium Plated (CP) 15mm dia screwed down high pressure with crutch or butterfly handles screwed both and iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs brass spindle for 15mm size stop cock complete all as specifed

S&F in repairs 15mm dia bib tap ISI Marked, cast copper alloy with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified and dirceted.

S&F in repairs 15mm dia bib tap fancy type ISI Marked, cast copper alloy chromium plated with crutch or butter fly handle screwed down screwed for Iron Pipe or brass ferrule and fixed complete all as specified and dirceted.

S&F in repairs brass spindle complete for 15mm dia bib tap complete all as specifed.

S&F 15mm bore pillar tap cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F 15mm bore pillar tap fancy type cast copper alloy chromium plated screwed downhigh pressure, with or without lettered 'hot or cold' with long screwed shanks and fly-nuts screwed for iron pipe, fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing 15 mm bore center hole basin mixer with regular spout with pop up waste assembly with 10 mm dia 450 mm long braided hoses and brass nuts, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

15mm bore, Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms), fixed in repairs, complete all as specified and as directed by Engineer-in-Charge.

Brass Chromium plated over head shower rose with swivel joints, any size, including 190 mm long arm fixed to pipe or union of 15 mm bore, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Vitreous china water closet, 'Orissa' pattern, including lime concrete bedding, size 580 x 440 mm white with integral foot rests excluding flushing cistern and flush pipe but including connection to trap, anti syphonage pipe etc. complete fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

Vitreous China wash down water closet pan and seat cover (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including P or S trap and including plastic water closet seat, black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device, including connection to drain pipe (or out going pipe) and to flushing pipe, antisyphonage pipe, etc. including cast iron 'P' or 'S' trap for 100mm bore of pipe, including brass CP jet nozzle with 900mm long PVC pipe, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F 110 mm bore Cast Iron (SWR) 'P' or 'S' trap, including fixed with solvent cement complete all as specified and directed.

Plastic seat cover for water closet seat, white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S&F PVC valveless, syphonic action type, flushing cistern of 10 ltrs capacity low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs PVC syphon with knob for PVC flushing cistern of 10 Litre of capacity complete all as specified and directed.

Repair/adjustment to washer/ siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug etc and making it functional complete all as specified and directed.

S&F in repairs Health faucet (ABS body) mild steel chrpmium plated sutaible for 15 mm dia pipe with 1.25 Mtr long flexible tube and ABS Wall hook including making connections and fixed in position complete all as specified and directed by Engr-in- charge

S&F for Flushing jet for pedestal pattern W.C including flexible pipe and brass Chromium plated nuts, fixed in repairs complete all as specified and directed.

Vitreous china wash basin, white flat back size 550 x 400 mm including waste coupling CP 32 mm dia and CI brackets of iron 65 x 65 x 6 mm embedded in PCC block with PCC 1:2:4 type B-1 and PVC waste pipe 32 mm dia & CP grating with holes fixed in repairs complete, all as specified and as directed by Engr-in-Charge.

S&F in repairs vitreous china urinal flat back 465 x 355 x 265mm size, including grating and connection to flushing pipe and outgoing pipe complete all as specified and directed.

Stainless steel sink, with drainage board, 1.00 mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 915 mm x 460 mm with bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and as directed.

S&F PVC low density waste pipe 32 mm bore of standard length with cup and washers for urinal/WHB, fixed in repairs, complete all as specified and as directed by Engr-in-Charge.

S&F PVC low density waste pipe 40mm bore of standard length with cup and washers for kitchen sinks, fixed in repairs complete all as specified and as directed by Engr-in-Charge.

S& F waste coupling of PTMT (half or full threaded), 32mm bore dia of discharge pipe (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F waste coupling of PTMT (half or full threaded), 40 mm bore dia of discharge pipe (Minimum weight 32mm-45gms/40mm-60 gms) fixed in repairs, complete all as specified and directed by Engineer-in-Charge.

S&F for Stainless steel waste coupling for S.S Sink 75mm to 100mm dia set with rubber washer plug etc fixed in repairs complete all as specified and directed.

S&F PVC connections 15 mm size with PTMT nuts of length 600 mm, fixed in repairs, complete all as specified and diected by Engr-in-charge.

S&F in repairs CP grating 100mm dia as suitable to existing trap as per requirement all as spd and directed by Engr-in-Charge

S&F for repairs CP central hole grating 100mm dia as suitable to existing trap as per requirement complete all as specified and directed.

Welding in repair exc 2.5cm but n exc 5cm in length,Thickness of Metal to be welded Exc. 6mm but n exc 9 mm including cleaning and preparing the surfaces to be welded together, holding the members in true position while welding and bevelling of edges, as required, complete all as specified and directed by Engr-in-charge.

M&L for Greasing of each roller (bottom and top ) of gate of hanger size 15 Sqm to 30 Sqm and smooth functioning of gate complete all as specified and directed by Engr-in-charge.

M&L for refixing of hold fast of rolling shutter size 7 Sqm to 11 Sqm including complete greasing after removing of old grease complete all as specified and directed by Engr-in-charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.

Note: (1) The repair has to carried out as and when required basis and accordingly site will be available in piecemeal wise and as directed by Enginer-in-Charge.

M/s Sunny Gupta (BID ID -3080396)

M/S MOHAN LAL SHARMA (BID ID -3083503)

M/S CHOUDHARY TRADERS (BID ID -3081990)

M/S ROMESH KUMAR SHAN (BID ID -3073619)