Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC 00 VILL RATI KA NAGLA SIKANDRA RAO ROAD INDUSTRIAL HATHRAS UTTAR PRADESH 204212 | HATHRAS | UTTAR PRADESH | 204212 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹8.3 L+₹1.4 L (20.6%)Rejected-Finance 23 6 C LAL VIHAR EAST END BAMRAULI PRAYAGRAJ 211012 U P | PRAYAGRAJ | UTTAR PRADESH | 211012 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹12.2 L+₹5.3 L (76.5%)Rejected-Finance | L3 | Rejected-Finance Being not lowest |
Tender Value
₹9.9 L
EMD Value
₹19,800
Closing Date
27 Oct 2022, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Pranav, AGE (I)
AGE (I) Manauri Allahabad-212212
REPAIR / MAINT OF LT DISTRIBUTION NETWORK/PANEL/CABLES WITH OTHER CONNECTING WORK IN OLD PROJECT AREA UNDER AGE(I) AF MANAURI
2022_MES_550255_2
9034/E8
Open Tender
Electrical and Maintenance Works
Item Rate
182 days
Manauri
As per NIT tender
7 documents required · 7 mandatory
₹500
AGE (I) AF Manauri
₹19,800
Yes
29 Dec 2022
6 Oct 2022
28 Oct 2022
6 Oct 2022
27 Oct 2022
15 Oct 2022
Amount
Excavating in trenches not exc. 1.5m wide and not exc. 1.5 metre deep and getting out in soft/loose soil complete.
Returning filling in foundation/trenches including spreading leveling, watering and well ramming in layers not exceeding 25cm thick in soil complete.
Removal of surplus excavated material to a distance n.exc. 50 metre and depositing where directed at a level n.exc. 1.5 metre above starting point complete.
M & L for sand (Ganga) cushioning for under ground cable with locally available sand for protection of cable 8cm before laying cable and 15cm deep over the cable including spreading and consolidations, complete. (Note-Punned thickness ie 180mm will be measured and paid)
M&L for brick protection cover over cable of sub class 'B' bricks (old size Bricks) laid dry over LT cable width of brick shall be laid across the length of cable) complete all as specified and as directed.
Cutting/boring to plinth protection/hard standing/road etc in suitable depth and crossing of GI pipe of size 80 mm bore so that XLPE underground cable can be passed and giving mechanical protection to cable complete all as specified and directed. Note:- Quoted rate shall be included the cost of required material for repairing to disturbed surface all as per existing specification and GI pipe shall be measured and paid separately under respective items.
Supply, laid in trench /fixed in replacement with surface of wall/roof etc jointing, thimbling and glanding in suitable size testing to cable XLPE insulated, screened, PVC bedded galvanised steel strip or wire armoured electric LT cable with aluminium conductor 1100 volts, grade cross section area 4 core x 25 Sqmm (earthed) complete all as specified and directed.
All as per item No 7 above but size of cable 3.5 core x 50 Sqmm (earthed)
All as per item No 7 above but size of cable 3.5 core x 70 Sqmm (earthed)
All as per item No 7 above but size of cable 3.5 core x 95 Sqmm (earthed)
All as per item No 7 above but size of cable 3.5 core x 120 Sqmm (earthed)
Supply & fixed in replacement 40 MM dia bore GI tubing 'light grade' with fixing accessories laid in trenches or on wall or pole with clamp complete all as specified & directed.
All as per item No 12 above but of 50 mm dia bore
All as per item No 12 above but of 80 mm dia bore
M&L painting to steel prepared surfaces of any width or girth not otherwise described by using synthetic enamel paint in two coats (one as finishing coat) over one coat of red oxide zinc chrome primer on surface of steel structure /girder/ angle frame / wire mesh fencing (both side) / installation board / gate etc in any description at E/M installation using paint spray gun on specified working pressure including sign making /marking with using different colour in given size of letter etc complete all as specified and directed. Note- Paint colour & shade including writing marking of letters etc shall be deemed included in quoted unit rate and the same shall be approved by Deptt.
M & L Painting to existing two/three steel pole structure of 11 mtr height including mild steel work like cross arms, clamps, pipe channel, bracing etc after cleaning and prepration of surfaces painting externally above planting depth with one coat of aluminum paint over a coat of aluminum primer including preparation of existing surfaces and marking pole numbers in 15 cm dia with approved colour in circular and making 03 Numbers & 02 Numbers of bands & strips with 30 cm wide fluorescent paint from bottom of pole to 1.5 mtr height of pole complete all as specified and as directed. Note : Cutting of bushes & tree branches upto 3 Mtrs height of pole shall be deemed included in quoted unit rate.
All as above item No 16 here in before but single steel tubular pole in 9 /11 Mtrs long.
M & L for earthing complete with galvanized steel earth plate electrode of size 60 CM x 60 CM x 6 MM thick buried directly in ground (earth pit not less than 2.25 Mtrs deep below the ground level) with top edge of earth plate not less than 1.50 Mtrs below normal ground level connected to galvanized earth lead strip 32 x 6 MM size by means of nut, bolts & check nuts and washers of galvanized iron or steel connected to earthing test point complete all as specified or indicated, including earthing pit with PCC 1:3:6 type C 1 using 20 mm graded stone aggregate & RCC cover slab 40 MM thick as in RCC 1:2:4 type B-1 using 20 MM graded stone aggregate, reinforced with 8 MM dia TMT bars @ 150 MM centre to centre both way with two Nos lifting handle, GI pipe 20 MM dia 'light grade' with funnel and wire mesh for watering and 40 MM dia 'light grade' GI pipe for GI earth strip 32 x 6 MM protection etc complete all as shown in electrical plate No. 3 of SSR Part - I (2009) including testing on completion including dismantling of old existing earthing complete all as specified and directed. Note:- Items includes cost of 7.5 metre galvanized earth lead strip 32 x 6 MM.
M&L earth continuity conductor or main earthing lead fixed to wall on batten or recess or chasses or buried in ground or drawn in conduit / pipes or fixed to pole or any other indicated situation for loop earthing etc for galvanised earth strip 32x6mm including taking down existing strip complete all as specified and directed.
M&L for erection in position of true vertical swaged tubular pole type 410 SP-31 [9.0 m long] complete with cast iron base plate, finial taper plug, bolts, nuts and screws and top cover complete including taking out old pole any type from ground and making good disturbed surface complete all as specified & directed including following:- (contd..)
(contd.... Srl No 20) [a] Excavation in trenches not exceeding 1.5 m wide & 2 m deep for pole foundation & getting out soft loose soil, returning filling soil in the trenches after fixing of pole in foundation ramming earth around the layers not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 m. [b] M&L providing PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation 600 mm x 600 mm cross section planting depth 1.8 m for concrete casing the pole up to ground level. [c] M&L providing PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth band/ collar 300 mm high from ground level & 450 mm dia. [d] M&L painting of pole on external surface with one coat of black bituminous paint [up to planting depth] and above plinth band/ concrete collar with two coats of aluminium paint over a coat of red oxide primer including preparation of steel surface and painting with synthetic enamel paint blue colour, circular band three number of 30 cm wide in alternate layer up to height of 1.5 m above plinth band of pole. [e] Material & labour writing letter or figures/ pole number [Block, Roman, Italic as Indian] with thick synthetic enamel paint of approved shade not exceeding 30 cm. Note: (i) Old dismantled portion of LT poles in grounds shall be filled with PCC (1:5:10) type E-2 using 40 mm graded stone aggregate. Cost of PCC filling shall be deemed included in quoted unit rate (ii) Rate shall be deemed to include cost of Eearth work, PCC & other work as mentioned here-in before (a) to (e) under this item.
S&F in replacement of cross arms bracing, supports, clamps and back plate fabricated from structural steel section including nut & bolts, washers, welding, bending, cold or hot, drilling hole for bolts in any shape or size as indicated complete all as specified and as directed. Note:- Painting shall be measured & paid separetaly under respective item of this schedule.
S&F in replacement MCCB, 3 pole, 63 Amp rating having breaking capacity of 16 KA, 415V adjustable thermal process based magnetic setting type Ics=75% Icu complete all as specified aid directed. Make: Legrand Cat part No 420003 or equivalent in makes as specified in list of make Appendix 'B' to particular specifications.
All as per item No 22 above but 4 pole 415 Amps 125 Amps rating having breaking capacity of 16 KA, 415V. Make: Legrand Cat part No 420016 or equivalent in makes as specified in list of make Appendix 'B' to particular specifications.
S&F in replacement MCCB, 4 pole, 250 Amp rating having breaking capacity of 36 KA, 415V adjustable thermal process based magnetic setting type Ics=75% Icu complete all as specified and directed. Make: Legrand Cat part No 420249 or equivalent in makes as specified in list of make Appendix 'B' to particular specifications.
Supply, jointing, commissioning and testing in replacement heat shrinkable end termination /straight through jointing kit suitable for 1100 volt grade (Earthed) cable for outdoor type complete with jointing material and required accessories suitable for underground XLPE cable of size 4 Core x 16 Sqmm (earthed) complete all as specified and directed. Make: Dension/3M/Rahycam or make as mentioned in Appx 'B' of PS.
All as per item No 25 above but for 4 core x 25 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 50 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 70 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 95 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 120 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 150 Sqmm (earthed)
All as per item No 25 above but for 3.5/4 core x 240 Sqmm (earthed)
Supply and fixed in replacement of flood light fitting LED minimum 200 W (CCT-5700K) equipped with IP66 protection to be fix on pole/ wall etc all as site making all connection using suitable three core flexible copper cable drawn through in flexible conduit pipe from control box to light fittings complete all as directed. Note :- (i) Fitting shall be of Make : Bajaj cat No PRAZE F 240L WH NB-A5 TG SD or Crompton cat Part No LFLN-200-CDL/60-M (PLUTO NEO) or equivalent model of make philips/ Wipro. Light fitting of other make of higher capacity may be used without any price adjustment. (ii) Cable from MCB to fitting shall be included in unit rate quoted by contractor.
Supply and fixing in replacement to pin type porcelain vitreous white brown or green insulator including one galvanised mild steel spindle two galvanised iron washer and one galvanised iron nut 65 MM dia with bolt washer suitable for 1100 volt grade complete.
All as per item No 34 above here in before but shackle type in size 100 MM height, max dia 115 MM suitable for 1100 volt grade with GI strip 31 X 5 , 14 MM dia of bolt complete all as specified and directed.
S&F in replacement stay assembly comprising of 7/8 SWG galvanised stay stranded wire in required length fixed between pole and hook with flat iron clamp bolts nut and washer, galvanised 14 MM dia, 400 MM long, stay bow with 19/20 MM dia 215 CM long stay rod with threaded ends, GI nut and washer, GI stay plate 230x 230 x 6 mm thick plate, two nos thimble, MS clamp made out of 50x 6 MM flat iron loop insulator made of 90 MM x 140 MM dia, 25 MM porcelain all as shown in electrical plate No 1 including required excavation/ earthwork and PCC for foundation and coping in size 30 x 30 x 30 CM complete all as specified and as directed. Note: Quoted rate shall deem to be included cost of earth work and cement work.
Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ. (ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri if not mentioned in BOQ.
Pleiad Complex On
K R GUPTA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .