Annual repair and maintenance of to various residential building under Division No.III Shimla. (SH - Repair and renovation of M.H. No. 12 Grant lodge Shimla-2).

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in charge: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) carriage of materials within all leads and lifts.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50metres lead;- For thickness of tiles 10mm to 25mm complete including carriage of materials within all leads and lifts.

Dismantling wooden boardings in lining of walls and partitions including frame work and stacking the materials ithin all leads and lifts including carriage of materials:-Thickness above 25mm and upto 40mm.

Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within all lead including carriage of materials within all leads and lifts.

Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within all leads of G.S. Sheet including carriage of materials within all leads and lifts. (i) G.S. Sheet

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within all lead lift. :- Ordinary rock

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(i) 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :(i) 1:3:6 (1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads and lifts.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.comlete including carriage of materials within all leads and lifts.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.Granite work including carriage of materials within all leads and lifts.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position :(i) Rai wood/Kail wood/Chil Wood including carriage of materials within all leads and lifts.

Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials in all leads and lifts.

Providing and fixing plain lining with 9mm thick commercial ply necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). including carriage of materials within all leads and lifts.(i) 9mm thick commercial ply

Providing and fixing 19mm (Nineteen milimetre) thick commercial board Shutters for cup board etc., with screws and fittings wherever required, (fittings to be paid separately) including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. carriage of materials within all leads and lifts.

Providing and fixing 19mm (Nineteen milimetre) thick commercial board for cup board etc., in shelves with screws and fittings wherever required, (fittings to be paid separately).carriage of materials within all leads and lifts.

Providing and fixing 4mm thick teak ply conforming to ISI in plain lining/panelling/under floors with necessary screws/nuts & bolts/ nails and fixed on wooden /steel frame work complete as per direction of Engineer-in- charge (Frame work shall be paid for separately) including carriage of materials within all leads and lifts.

Providing and fixing 1.00 mm thick coloured or plain laminated sheet (sunmica) on boards / ply wood sheets with approved adhesive and nails complete including carriage of material in all leads and lifts.

Providing and fixing 12 mm thick Pine Wood wood Tongued and Grooved lining of approved quality with butt jointing and nails(frame work and cover fillets to be paid for separately). including carriage of material in all leads and lifts.

Providing and fixing 10 mm thick PVC. Pannel of approved make Colour and design fixed with Toungued Grooved Jointing in Ceiling with butt jointing and nails(frame work and cover fillets to be paid for separately). including carriage of material in all leads and lifts.

Providing and fixing ACP. Sheet 4 mm THick ceiling/Walls/ Doors/ Lining/ Panelling of approved quality with necessary nails etc. complete (frame work to be paid separately) including carriage of materials within all leads and lifts

Providing and Fixing Tongued glass 8mm Thick in position as per direction by Engineer -in - Charge including carriage of Material with in all leads and lifts

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) (i) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).including carriage of Material with in all leads and lifts

Providing and fixing moulded corner Beading 40x12mm thick in section includung fixing with necessary nails and screws etc. Complete(i) Second Class Deodar wood including carriage of Material with in all leads and lifts

Providing and fixing Hard wood lipping/ beading or taj beading of size 18mm X3mm fixed with wooden adhesive of approved quality and screws/nails as per direction of Engineer-in-charge including carriage of Material with in all leads and lifts

Providing and fixing 150mm size oxidized M.S. double acting spring hinges with necessary screws including carriage of materials within all leads and lifts.

Providing and fixing 100mm size oxidized M.S. double acting spring hinges with necessary screws including carriage of materials within all leads and lifts.

Providing and fixing Hydrolic Hinges for cup Board Shutters( Daddu Kabja) with necessary screws including carriage of materials within all leads and lifts.(i) 100 mm size

Providing and fixing magnatic catcher with screws etc. complete including carriage of materials within all leads and lifts.

Providing and fixing powder coated telescopic drawer channels 450 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. including carriage of materials within all leads and lifts.

Providing and fixing bright finished furniture handles with screws etc. complete:including carriage of materials within all leads and lifts (i) 150 mm

Providing and fixing bright finished Basket Ess Ess Make for Modular Kitchen ( Wire make Basket in Drawer):including carriage of materials within all leads and lifts

Providing and fixing bright finished Crockery Rack Ess Ess Make for Modular Kitchen :including carriage of materials within all leads and lifts (i) size 1000x1000mm

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. including carriage of materials within all leads and lifts.(i) Hot finished welded type tubes

Providing and fixing chequered steel plates including cutting , welding complete in flooring over steel frame work Priming coat of red lead paint. (frame work to be paid separately) inlcuding all carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.

Providing and fixing M.S. BP Sheet 2.00 mm thick in eaves board/ facia/ soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in charge (Base members of steel work shall be measured and paid separtely) including carriage of materials within all leads and lifts.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete carriage of materials within all leads and lifts. (i) Size of Tile 600x600 mm

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. carriage of materials within all leads and lifts.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete carriage of materials within all leads and lifts.:(i) Flashings/ Aprons.( Upto 600 mm)

Providing temporary platform by way of scaffolding for all kind of works in halls/ rooms having exceptional heights with bamboo complete tied with rope on joints and platform of old CGI sheets etc. in all respect including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge.

Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete including carriage of materials within all leads and lifts .(i) 300x16mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of materials and as per the direction of the Engineer-in-Charge.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.(I) With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat of approved brand and manufacture carriage of materials within all leads and lifts.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat of approved brand and manufacture carriage of materials within all leads and lifts.

Polishing two or more coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts.

Providing and fixing C.P. brass Kitchen Sink mixture of approved quality Ess Ess Make Long Body including carriage of Matreial with in all leads and lifts as per direction of Engineer-in- Charge.(i) 15mm Nominal Bore

Providing and fixing Ess Ess Make C.P. brass angle cock Two Way 15mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts.

Providing and fixing Ess Ess Make C.P. brass angle cock 15mm (fifteen millimetre) nominal bore including carriage of materials within all leads and lifts.

Providing and Fixing Acrylic Corner With 3 Nos Shelves including fittings complete .including carriage of materials within all leads and lifts.

Providing and fixing Ess Ess Make CP Brass 750 mm long towel rail with nails and Screws .including carriage of materials within all leads and lifts

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.(i)Flexible pipe 32 mm Dia carriage of materials within all leads and lifts.

Providing and fixing uplasticised PVC connection pipe with brass unions :600mm length ( Viking Make) (i) 15 mm Nominal Bore carriage of materials within all leads and lifts.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore carriage of materials within all leads and lifts.

Providing and fixing Electrical Chimny for Kitchen ( Kaff Mainz Electrical Chimny) 90 Cm. Long including carriage of materials within all leads and lifts.

Disposal of surplus excavated earth by Mechanical with in all leads on approved dumping site of M.C. Shimla or otherwise including payment of prescribed charges of dumping to the owener of dumping site through all mode of transportation including head load animal load or mechanical means alongwith its leveling and to complete the work of mechanized means and labour (if any required).The dumping site to be arranged by the contractor entirely at his own risk and cost. All useful materials such as stones, aggregate and slates shall be sorted out and stacked along roads side any loss of the public/private property during the course of diisposal shall be the absolute responsibility of the contractor which shall have to be dully compensated by him in all respect as per direction of Engineer-in-Charge.

LALIT KUMAR

Suresh Kumar