Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹16.2 L+₹1.0 L (6.87%)Rejected-Finance A 4 TARINI APARTMENT PHASE I KILBURN COLONY HINOO DISTT RANCHI JHARKHAND 834002 | RANCHI | RANCHI | JHARKHAND | 834002 | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹16.6 L+₹1.4 L (9.53%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹17.3 L+₹2.1 L (14.1%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹17.8 L+₹2.6 L (17.4%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE AMRITSAR PIN 143001
CERTAIN REPAIRS TO GG FORT MARRIED ACCOMODATION UNDER AGE B/R I AT AMRITSAR
2022_MES_554255_1
GE/ASR-54/2022-23
Open Tender
Civil Works
Item Rate
120 days
GE Amritsar
CLASS E category a i
8 documents required · 8 mandatory
₹500
GE Amritsar
₹40,000
12 Dec 2022
24 Sept 2022
22 Oct 2022
24 Sept 2022
21 Oct 2022
8 Oct 2022
Amount
Material and Labour for rendering 15mm thick on brick or concrete surfaces of walls in Cement Mortar (1:6) , surfaces finished even and smooth without using extra cement ; including taking down cement the old unserviceable plaster of any description on brick walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. ; complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 15mm thick on brick or concrete surfaces of walls in Cement Mortar (1:4) , surfaces finished even and smooth without using extra cement ; including taking down cement the old unserviceable plaster of any description on brick walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. ; complete all as specified and as directed by Engineer-in-charge.
Material and Labour for rendering 10mm thick on brick or concrete surfaces of Ceiling , Chajja, facia etc in Cement Mortar (1:3) , surfaces finished even and smooth without using extra cement ; including taking down cement the old unserviceable plaster of any description on Ceiling , Chajja, facia etc including raking out joints, hacking for key, scrubbing down with water, etc. ; complete all as specified and as directed by Engineer-in-charge.
Demolition of brickwork, built in cement mortar including all quoins, arches, pillars, etc. ; complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick work with sub class "B" bricks ( Using old size bricks ) straight or curved on plan exc 6 m mean radius, built in Cement Mortar (1:6) ; complete all as specified and as directed by Engineer-in-charge.
Material and Labour for brick work but except bricks (Using old serviceable bricks retreived from dismantling at Srl item No 5 shall be reused after necessary cleaning of mortar) straight or curved on plan exc 6 m mean radius, built in Cement Mortar (1:6) ; complete all as specified and as directed by Engineer-in-charge.
Material & labour for preparation of newly plastered surfaces of walls, pillars, corniese etc with necessary putty filling & make the surfaces smooth , and applying Two coats of Cement Base Paint over one coat of cement primer to walls, pillars,cornieces etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material & labour for preparation of newly plastered surfaces of walls, pillars, corniese etc with necessary putty filling & make the surfaces smooth , and applying Two coats of Oil Bound Distemper over one coat of cement primer to walls, pillars,cornieces etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material & labour for preparation of newly plastered surfaces of Ceiling, Chajja, facia etc , and applying Three coats of white lime wash to Ceiling , Chajja, facia etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Material & labour for preparation of newly plastered surfaces of Ceiling, Chajja, facia etc , and applying Two coats of white lime wash to Ceiling , Chajja, facia etc ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy, complete all as specified and as directed by the Engineer in Charge.
Supply and Fixing in repairs of Brass Chromium plated Tubular towel rail, 20 mm dia D type, 60 cm long between flanges ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of vitreous china squatting pan of Orissa pattern size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding and making good the dismantled portion to match with existing surfaces of floor with the same specifications ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of 10 Litres capacity PVC valve less syphonic action flushing cistern low level with inlet, ball valve, float and handle including MS brackets, flush pipe of polythelene of low or high density or PVC 32mm dia ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of vitreous china wash hand basin white flat back type size 550mmx400mm , excluding taps chain and plug and porcelain stopper but including MS brackets , CP waste coupling 32mm and PVC waste pipe 32mm dia including cutting for and pinning ends of brackerts ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of PVC connection pipe 15mm dia 600mm long with brass check nut at both ends comlete ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of 600x450mm looking mirror 4mm thick fancy type with teak wood beading all around incl polishing etc complete with all fixing arrangements ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs of stop valves brass chromium pltaed 15mm dia with long shank and cup concealed type ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of chromium plated stop valve 15mm bore fancy type screwed down for high pressure ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs of stainless steel kitchen sink with draining board made of 1mm thick sheet for kitchen with plug washers waste pipe cast iron cantilever bracket ovre all size 915 x 460mm with bowlsize 410x310x160mm ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs of stainless steel kitchen plate rack size 900 x 750 x 300mm deep made out of 1mm thick sheet including fitting arrangement ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing of 15mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including including disconnecting , dismantling & taking down/up old unserviceable GI tubing and removing to store ; complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing of 20mm bore tubes (medium grade) galvanised with all fittings and fixed to walls and ceiling or laid in floors complete including including disconnecting , dismantling & taking down/up old unserviceable GI tubing and removing to store ; complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing in repairs of 100mm dia CP grating with or without hinge type or hole type ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of brass chromium plated shower rose fancy type with CP arm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs PVC coated curtain rods 20mm dia including brackets to hold the rod & a set of ABS finials of approved quality & appropriate qty of ABS plastic rings ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.14 mm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of aluminium snake guard strip 30mm thick powder coated with rubber ring to be fixed on bottom of existing door shutters to guard from snakes/frogs ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing brass chromium plated soap dish fixed with screws to walls ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs pillar taps 15mm dia cast copper alloy with capstan heads chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs CP bib tap 15mm dia long body screw high pressure for iron pipe ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing in repairs rotational moulded polythene, triple layers, water storage tank 1000 Ltr capacity, closed top, cylindrical, hoisted and fixed in position including Supply and Fixing 20mm bore PTMT ball valve epoxy coated minium weight 210gms with aluminium rod ; Complete all as specified and as directed by Engineer-In-Charge.
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Granite (of any type) work (table rubbed and polished) 20mm thick in steps , jambs, pillars, window cills, cooking plateforms and like in cemnet mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs PVC waste pipe32mm dia suitable for WHB/Sink ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkhat with shuttering (without taking off shutters from frame including grill & guard bars) size of shutter not exceeding 1.5 sqm each ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down chowkhat with shutters without taking off shutters from frame size of shutters exc. 1.5 but not exceed 4 Sqm each ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down shutters of any description size of shutter not exc 1 sqm each ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down shutters of any description size of shutter exc 1 sqm but n.exc 2 sqm ; Complete all as specified and as directed by Engineer-In-Charge.
Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing in repairs of Factory made Godrej type cupboard shutter made of 1.00 mm thick MS sheet fitted in frame of 35mmx35mmx6mm thick including necessary fitting such as handle , lugs, locking arrangement and including one coat of primer area not exc 2.00 sqm area of cupboard ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing pressed steel frame for doors with one or two rebates size of frame 125x60 mm including necessary fixing lungs hinges lock strike plate etc ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing factory made 35 mm thick flush shutters solid core construction with block board core and plywood face panels.Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 35 mm thick glazed and Skelton door shutters IInd class hard wood open rebated prepared to receive in SSR part-I class 8 (a) glass gage dividing in squares size of member as per specified and Material and Labour for preparation of undecorated wooden surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for Box type steel window double shutters (both Glazed & Gauzed shutters) made of ERW tube P - section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass with & including Sheet glass, SS wire cloth, fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by the Engineer-in-Charge :- (a) Hold fasts 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintel hinges size 75mmx12mm - 2 Nos per leaf (g) MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly. (h) 3mm thick clear sheet glass 3 nos per glazed leaf of reqd sizes glazing with oil putty. (j) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to each gauged shutters of window. (k) Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and (l) Repair all the damaged surfaces around window with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass with & including 3mm thick Sheet glass glazing with oil putty, MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly, fixture and fittings like as Stopper, Cleat, Pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-1019/08 sheet 1/3 to 3/3 dt 01 May 2008 , including Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and repair all the damaged surfaces around ventilators with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Supply and Fixing Aluminium handles 150mm long, cast type anodised ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Aluminium anodised barrel tower bolt 150mm long ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing Floor door stoper of aluminium alloy body with hard drawn steel spring 140mm long ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 300mm long aluminum alloy anodized sliding door bolt with hasp and staple(bolt type)and fixing clips of sheet cast or ectruded sec and fixing bolts and sliding bolts of extruded sec or cast aluminum alloy and fixed all as spd and directed.
Supply and Fixing butt hinges medium weight cold rolled stainless steel complete size 100mm ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing MS 300mm long ordinary Helical mild steel stove enameled black door springs including rollers and roller plate ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 100mm long Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 3mm thick Sheet glass, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sq.m. in each pane including hacking out old brocken glass ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing 3mm thick figured glass pin head type, ordinary quality and glazing with oil putty/wooden beading in square n exc 0.5 sqm in each paneincluding hacking out old brocken glass ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in bed blocks for hold fast & similar work etc ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for preparation of undecorated steel or iron surfaces of any description , not otherwise described , over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing for 7 to 8mm thick glazed ceramic coloured tiles of size 450mm x 300mm on vertical surfaces such as skirting , dado and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match over and including 10mm thick rendering in cement mortar (1:4) on brick surface , with & including dismantling old unserviceable floor hearth or wall tiling with cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; complete all as specified and as directed by Engineer-in-charge.
Supply and Fixing for non skid ceramic light coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in cement mortar (1:6) , including dismantling old unserviceable floor hearth or wall tiling with cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises ; complete all as specified and as directed by Engineer-in-charge.
Supply and fixing in repairs of 18mm thick solid PVC board as in cupboard shelves, in kitchen cabinet etc ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in repairs of 5mm thick solid PVC sheat as in back side of kitchen cabinet etc; Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in repairs of 18mm thick PVC sheet shutter one side prelaim of any shade as in kitchen cabinet etc ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in repairs of 40 mm long hinges self closing type hydrulic type ; Complete all as specified and as directed by Engineer-In-Charge.
Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for 50mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate as in plinth protection Finishing fair and even ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and fixing in repairs of 15mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142gms) complete all as specified and as directed.
Supply and fixing in repairs of 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 210 gms ) ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing framed work as door, chowkhats, and Grill gates of angle frame work fixed with Nut & bolt to wall or other section complete drilling or fixing welding be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also festering and fixing ; Complete all as specified and as directed by Engineer-In-Charge.
Labour for Cutting or uprooting grass on roofs, removing rubbish off the premises, cleaning surface and preparing to receive new plaster ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for flush pointing to brick tiles laid flat in cm 1:4 with 5% crude oil including racking out joints and pointing to brick tiles ; Complete all as specified and as directed by Engineer-In-Charge.
Material and labour for remove all loose gravel cement mortar, dirt ,oil,grease and foreign material by jet of dry air and clean the surface mechanically or by grinding to make it smooth before application. repairs all jointss/pointing with cement mortar 1:3 and cracks with highly elastic bituminious cold applied putty tarplastic->having penetration after setting upto 8mm. Levelling of surface to give proper slopwill be done as per site requirement with shalipatch/equivalent cold applied, Bituminious mortar & cold emulson cum water proofing liquid. Created SSD condition on surface with water prime the surface with acrylic modified Liquid Bitumen Membrane mixed with portable water in the ration of 1:1 and applying @400 gm per sqm ( As per surface condition). Applying first coat of Modified Liquid Bitumen Membrane having elongation 200 % conforming to ASTM -C -412 & having crack bridging of 8mm conforming to ASTM-C836 with tensile straight after 7 days 0.50mm conforming to ASTM-C-412 with no diluation of water on primed surface while the surface is still tacky with consuption of of 700 gm per sqm. Lay Geotex of 45-50 GSM/Fibre mesh simultaneously and paist it properly with overlap of 50mm. Allow the first coat to dry for 10-12 hrs. Apply 2nd coat on qured first coat with consuption @700 gm per sqm in opposite direction on first coat by brush or roller . Allow it to dry for 10-12 hrs after applying 2nd coat with consuption @700gm per sqm. Ensure final curing time of 36 hrs before allowing /carrying out any furthe work. Conduct ponding test after min 7 days applying two coats of UV Resistand Elastomeric Exteirior Acrylic Weather resistant water proof coating of liquid membrane having elonation of 300% after curing of 14 days conforming to ASTM D-6083- for U V Protection of Bituminious Elastomeric Acry6lic Emulsified Liquid Membrance to give long life and prevent its deterioration from sunlight ; Complete all as specified and as directed by Engineer-In-Charge. Note :- Applivation of water proofing treatement will be done by Authorised Applicator under company supervision . Company authorised applicator will submit authorisation and warranty letter for work done for 05 years as per work procesure adopted as per guidance from campany's side
Demolition of cement Concrete of in sunken floor exceeding 15cm thick (above ground level) and disposing off the rubbish to a distance exceeding 50 mtr but not exceeding 100 mtr away to low lying area ; Complete all as specified and as directed by Engineer-In-Charge.
Material and Labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement with WPC ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate 25 mm as in sunken portion finished even and rough ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for Cement concrete 1:7:12 type F-2 (using 40mm graded brick aggregates) as in foundations, filling and mass concrete ; Complete all as specified and as directed by Engineer-In-Charge..
Material and Labour for applying evenly a tack coat of Industrial bitumen 85/25 at the rate of 1.2 Kg per sqm over 0.30 Kg/Sqm of bituminous primer on roof including cleaning of surfaces ; Complete all as specified and as directed by Engineer-In-Charge.
Supply and Fixing (minimum) 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire sunken area with over lapping 100mm to either sides and sealed in ; Complete all as specified and as directed by Engineer-In-Charge..
Supply and Fixing 110mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including taking down eaves gutters and rain water pipes ( any size or pattern) , including all fittings , heads, shoes, bends, swan necks, etc., including cleaning or refixing or removal to store all fittings ; Complete all as specified and as directed by Engineer-In-Charge
Supply and Fixing 75mm bore PVC(SWR) pipes single socketed in any length fixed to walls with dash true nut and bolt at every 2mtr length including taking down eaves gutters and rain water pipes; Complete all as specified and as directed by Engineer-In-Charge
Sai Construction Co.
m/s inder construction co
G S ENTERPRISES
amardeep traders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .