SPL REP TO BLDG NO T-239, T-246 AT DRUGMULLA, PROVN OF TOILET AT DRUGMULLA AND SENTRY POST AND CLASS ROOM AT DAWAR UNDER THE AOR OF GE 874 EWS.

Excavation in trenches n. exc 1.5m in depth and 1.5m in width and getting out in soft/loose soil complete all as specified and directed.

M&L for providing cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in foundation, mass concrete and filings complete all as specified and directed.

M&L Form work to side of concrete in foundation, footing base, base of columns, side and soffits of plinth beam and similar work complete all as specified and directed.

M&L Form work to side of sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, and similar work complete all as specified and directed.

M&L Form work to side of columns and similar work complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in footing, foundation, beams, plinth beams, base for columns and mass concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span concrete etc complete all as specified and directed.

M&L for providing reinforcement cement concrete M-25 (Design Mix) as in columns and pillars etc complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

M&L mild steel TMT bars 5 to 10mm dia a as in stirrups, spacers and binders complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick walls in built in CM 1:4 complete all as specified and as directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed. Note :- (WPC shall be measured and paid separately)

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

M&L for walling of random rubble un coursed well bonded bedded solidly hearted built in CM 1:4 complete all as specified and directed.

M & L for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses maximum depression on face of straight edge 40mm complete all as specified and directed.

M & L for Plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in bands, coping, bed plates and the like including necessary form work and finishing all exposed surface of concrete complete all as specified and directed.

M & L for raised pointing to random rubble or polygonal rubble uncoursed or brought upto course set in cement mortar (1:3) complete all as specified and directed.

M&L for providing precast cement concrete in (Type B-1, 1:2:4 (20mm Aggregate) set in CM 1:4 as in bond stones window or door cills, lintels, bressummers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weathering, throating etc. and setting in mortar with joints to match complete all as specified and directed.

M&L for broken Stone & boulders Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and directed.

M&L For preparation of New plastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and as directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc complete all as specified and directed.

S&F mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

S&F Mild Steel Work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge covering, fixed with self tapping screws complete all as specified and directed.

S&F Anodised aluminium snap grid frame work Size of grid 605 x 605mm for false ceiling complete all as specified and directed.

M&L for Providing and fixing Gypsum board 12mm thick in ceiling fixed with screw asper manufactures instructions complete all as specified and directed.

M&L for sand filling under floor or in foundation including watering and consolidation etc complete all as specified and directed.

M&L hardcore of gauge n.exc. 63mm deposited, spread and levelled in layers n. exc 15cm thick watered and rammed to a true surface for plinth protection/path complete all as specified and directed.

M&L 100mm thick PCC 1:4:8 type D2 (40mm graded aggregate) for floor sub base complete all as specified and directed.

M&L providing 25mm thick cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in sub base in floor/paving etc complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11 sqm but n. exc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in CM 1:4 over 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) complete all as specified and directed.

M&L for coloured glazed ceramic tiles as in skirting/ dado of size (350x250 or 450x350) x 7mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match colour of the tile over backing coat/screed bed 10mm thick in CM1:4 on fair faces of brick/stone wall surface for laying dado/skirting complete all as specified and directed.

M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

S&F factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & Bottom rails. MS frames shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed.

S&F 100 mm long butt hinges extruded aluminium anodised complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F aluminium anodised alloy handles fabricated type 150mm size of handle complete all as specified and directed.

S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed.

S&F Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

M & L for on site LLDPE septic tank for 20 user designed to carry sewage and sullage water, excavation in any type of soil, 150 mm thick PCC 1:4:8 below foundation, Vent shaft, connection etc., complete for all accessories complete all as specified and directed.

M&L for construction of Soakage well, of size 1.8 m dia at bottom and 3 m effective depth complete all as specified and shown on drawing No. CESZ-TD-/2015 sheet No 1/3 & 3/3 dated 22 Feb 2015 (Revised dt 21 Mar 2015) and specified in particular specifications.

M & L for cement concrete bed to drain pipes including 150 mm packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed.

M & L for Sail-glazed stoneware drain pipes 150 mm laid in trenches and jointed complete all as specified and directed.

S&F vitreous china squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphonage pipe etc complete all as specified and as directed.

S & F Vitreous China Urinal, Half stall type, white with grating and union for discharge pipe including providing and fixing plugs with and including 60mm long brass screws, pointing around urinal back in cement with PVC 32mm dia waste pipe & waste coupling including spreader complete all as specified and directed.

S&F PVC valveless, syphonic action type, low level PVC flushing cistern 10 ltr cap white with flush pipe & all fitting complete all as specified and directed.

Supply & Fixing Vitreous China Ware Wash hand basin white flat back size 550mmx400mm including pedestal, cutting for and pinning ends of brackets or erecting stand including necessary PVC outlet pipe, CP coupling 32mm dia complete all as specified and directed.

S&F PVC connection 15 mm length 450mm complete all as specified and directed.

S&F bib taps cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S & F 15mm bore Stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylindrical vertical with closed top ) and fixed in position as specified in SSR Part -I complete all as specified and directed.

S&F PTMT ball valve high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule 20mm dia complete all as specified and directed.

S&F 20mm bore gun metal globe or gate valve with iron wheel head, screwed both ends complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / fixed to walls complete all as specified and directed.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length fixed to walls / floors or in trenches complete all as specified and directed.

S&F PVC (SWR) bends any radius, 110mm bore, fitted with oval access door

S & F bend suitable for 110mm dia PVC (SWR) pipe complete all as specified and as directed

S&F PVC (SWR) bends any radius, 75mm bore, fitted with oval access door complete all as specified and directed.

S&F PVC (SWR) reducers any radius 110mm bore complete all as specified and directed.

S&F 110mm bore PVC (SWR) junction, single (single T) equal or unequal with door access complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm dia complete all as specified and directed.

M&L PVC(SWR) floor trap, 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F Aluminium powder coated (thickness of powder coating not less than 50 micron) as in ventilators half fixed with 4mm glass and half louvers with clips of 4mm glass 100mm wide type of frame size 104mmX45.60mm thickness 3 mm, weight per kg /mtr 1.705 and one mosquito proof shutter frame size 44.50mmX25mm thickness1.40mm and weight kg/mtr 0.560.single leaf cut to size, jointed galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm together with cadmium plated steel screw including rubber packing aluminium beading or gasket for aluminium section for fixing of 4 mm pin headed glass sheet and wire cloth necessary fittings complete screws plugs complete all as directed complete all as specified and directed. Note : Aluminium frame ,shutter, glass, wire cloth ,louvered and accessories are included in above description.

S&F 20mm thick 2nd class softwood boarding, planed one side , with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

S&F Vitreous China urinal partition white of size 310x700 mm complete all as specified and directed.

S&F steel water tubing of nominal bore dia 15mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F steel water tubing of nominal bore dia 20mm medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S&F lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 along with chicken mesh wire netting 25 gauge 20 mm mesh fixed in repairs complete all as specified and directed.

All as per item No 77 above but 20mm bore pipe.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hard/dense soil complete all as specified and directed.

Removing excavated material (soil) n .exc 50m and deposited where directed at a level n exc. 1.5m above the straight point complete all as specified and directed.

All as per item No 01 above but for additional 1.50m or there part of in depth beyond the first 1.50 mtr.

Supply only integral water proofing compound all as specified and directed

M & L rendering 5 mm thick in CM 1:3 on fair faces of brick work or concrete surfaces as in roof slab etc all as specified and directed

M&L for Machine cut Kota stone slab flooring 20-25mm thick over 15mm thick cement screed base laid in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado, pillar laid over 10mm cement screed and jointed with ditto as specified and directed including rubbing and polishing complete all as specified and directed.

M&L for cement concrete 40 mm thick, type B-1, 1:2:4 (20mm graded aggregate) as in floor finishes and even and smooth without using extra cement complete all as specified and directed.

M&L Hard drawn steel wire fabric dia 3.8 mm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete.

M & L for 25mm thick 2nd class softwood boarding, planed one side, with butt joint fixed with nails in Fascia, eaves boarding complete all as specified and directed.

S & F 2nd class soft wood plain solid straight chowkats and frames wrought framed, rebated on the solid complete all as specified and directed.

S&F Factory made 35mm Plain framed, panelled shutter (two panel) (double shutter) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 30mm thick second class soft wood Glazed and skeleton shutters for windows/ventilators, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F 4.8 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in square area not exc. 0.5 Sqm in each pane complete all as specified and directed.

S&F extruded aluminium alloy with galvanised mild steel hinge pin Butt hinges 75mm long type C21

S&F Aluminium anodised, barrel tower bolts of extruded section and fixed 150 mm long complete all as specified and directed.

S&F extruded aluminium alloy handles 125mm size fabricated type anodized ISI marked complete all as specified and directed.

S&F MS pressed bow handle of 150m size oval type stove enamelled black complete all as specified and directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 250mm long not less than 12mm dia with and including minimum of 06 bolts and nuts, 4 on plate and 2 on staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, plate and fixed complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and directed.

M & L for 10 mm thick rendering on other fair faces of brick work or concrete surfaces in CM 1:6, rendering finishes even and smooth (without using extra cement) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square leads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long18mm Diameter of bolt and Length 60mm from underside of head to the end complete all as specified and directed.

M&L for Anodised aluminium frame for windows with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L for Anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F For 3 mm Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 150mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

M&L for cement concrete type 100mm thick, 1:2:4 (20mm graded aggregate) as in sub base for floor finishes complete all as specified and directed.

S&F for Mild steel, plain, black sheet 1 mm thick in fascia, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with Screws complete all as specified and directed.

S&F 2nd class soft wood Weather boarding, clean sawn, plain, 20mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm lap complete all as specified and directed.

Dismantling timber scantling 40 Sq cm and over in section in any position in unframed work complete all as specified and directed.

M & L second class soft wood in scantling clean swan complete all as specified and directed.

Taking down chowkat with shutters exc.1.5 Sqm but n exc.4 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed.

Taking down chowkat with shutters n. exc.1.5 Sqm (w/o taking off shutters from chowkhat) complete all as specified and directed.

S & F glazed & skeleton shutters 30 mm thick 2nd class softwood, open rebated and prepared to receive glass, gauze, etc.(without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part I Section 8 clause 8.20 (a) fitted to chowkhats. Ditto, but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, insulation, etc.) or insulation board /slab/blankets, any thickness, including cover fillets.

M&L for 2nd class soft wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame work with secret nailed as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a filler coat of thin varnish after preparation of surface, complete all as specified and directed. Note : Frame work shall be measured and paid separately.

M & L Plain fillets of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails complete all as specified and directed.

S&F for MS barrel tower bolt, stove enamelled black, with bright bolt of 100mm long complete all as specified and directed.

S&F for MS barrel tower bolt, stove enamelled black, with bright bolt of 150mm long complete all as specified and directed.

S&F for MS Sliding door bolt, plate type, stove enamelled black, with bright bolt not less than 12mm dia of 250mm long complete all as specified and directed.

S&F for MS butt hinges medium weight, cold rolled 100mm long complete all as specified and directed.

All as per item no 122 but 75mm long.

M & L for mild steel pressed handles, oval type, stove enamelled black of 100mm long complete all as specified and directed.

All as per item no 124 above but 150 mm long.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Dismantling floor hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed.

Supply and fix Vitrified Ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 thick screed mortar in CM 1:6 complete all as specified and directed.

M&L Chequered cement concrete tiles (200x200x25mm) thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors over 15 mm thick screed bed of 1:4 cement mortar complete all as specified and directed.

Demolition in Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, complete all as specified and directed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLSH, drawn through PVC casing caping including accessories and provision of PVC boxes modular type for mounting of switches, socket, fan regulator etc, provision of modular box PVC, No of modules as required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and directed.

As per Item No 133 above but point wiring for One socket outlet 5 pins 5 amps controlled by one switch on same board .

As per Item No 133 above but point wiring One socket outlet 5 pins 5 amps controlled by one switch on independent board.

All As per Item No 133 herein before but wiring with 2.5 sqmm copper wire (FRLSH) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F modular type Switch 6 Amps single pole one way, complete all as specified and as directed.

S&F socket outlet 2-in-1, 3 pin, 6 Amps modular type (ISI Marked) complete all as specified and as directed.

S & F switch socket combination 2 in 1, 6A modular type complete all as specified and as directed.

S & F switch socket combination 3 pin 16A, modular type complete all as specified and as directed.

S&F ceiling rose, PVC/poly carbonate, isolated body three terminal complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing in replacement LED warm lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F in replacement LED light fitting 1x9W/10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F sheet metal enclosure for DB SPN (double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series complete all as specified and as directed.

Supply and fixing building security light fitting LED 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp complete with IP 65/66 protection including connection with ceiling rose complete all as specified and directed .

S & F bracket suitable for bldg security light fitting made out of 40mm dia GI tubing light grade 1.2 mtr long bent to shape, fixed with necessary nuts bolts and clamps of suitable size complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in and as service connection one 2 core cable of size 16 Sqmm complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0 mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

S&F switch piano flush button single pole, one way 5 amps complete all as specified and directed.

S&F socket outlet multi 5 pins 6 amp, complete all as specified and directed.

S&F lamp holder angle type PVC/Poly carbonate type insulated body with back plate suitable for batten/wall fitting complete all as specified and directed.

Supply and fix LED Bulb 9 Watt complete all as specified and directed.

S&F sheet metal enclosure for DBs (double door type) when MCBs to be used single pole and neutral 4 way including blanking plate as required with 200 amps rated busbar 240V, fixed sunk/flush to the wall complete all as specified and directed.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 10 Sqmm complete all as specified and directed

S&F switch piano flush button single pole, one way 15 amps complete all as specified and directed .

S&F LED, 20 Watts, 4 ft, fittings complete with all accessories for mounting light fittings complete with earth terminal connection, 3 terminal/ PVC/ polycarbonate, isolated body complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F of exhaust fan 250 mm Sweep with louver shutters, plastic exhaust fan AC 230V, 50 Hz complete with fixing arrangement and connection complete all as specified and as directed.

S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminium stranded conductor served with PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension ire one twin core flat cable of circular of size 16 sqmm complete all as specified and as directed.

M&L for Cutting of existing steel tubing for alteration or additions and insertion of Tee 20x20x20mm, union, socket complete all as specified and as directed.

S&F GI water tubing 20mm bore 'medium grade', galvanized, with all fittings like socket, union, elbow, bend, tees etc jointed complete all as specified and as directed.

S&F gun metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of bore of 20mm complete all as specified and as directed.

Supply, Laying , jointing and testing LT underground cable, heavy duty, 1100 Volts, XLPE insulated and sheathed, armoured with multi-stranded aluminium conductor cable , laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts duly encased in galvanised steel pipe of suitable sizes including cable gland of suitable sizes and aluminium lugs for connection complete all as specified and directed for size 10 sqmm 2.0 core complete all as specified and as directed.

Supply and laying dry river sand for cable cushioning in trenches to required width at bottom and top of cable including spreading levelling watering and consolidation complete all as specified and as directed. Note:-Punned thickness only shall be measured and paid.

Supply and laying old size brick covering with width equal to length of brick as the mechanical protection to cable with well burnt sub class 'B' laid in trenches flat complete all as specified and as directed.

Supplying and fixing , light grade , Galvanised mild steel pipe / tubing, complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps , bolts , nuts and washers complete all as specified and directed as for cable protection of size 50 mm bore complete all as specified and as directed.;- Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

Supply and fix CS mounted manual revolving search light LED type, white color aluminium body operating voltage 230V, control gear type lamp wattage 250W, type of Lamp HPSV/MH maximum effective range 200 to 400 mtr complete all as specified and as directed.

Please Enable Macros to View BoQ information