Providing cement concrete road and drainage facilities to the cross lane (near side oil company) in G.N Palayam village in Villianur Commune

Amount

Code No.2.27C.1 Supplying and filling with gravel (excluding rock) in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with 1/2 tonne roller,or wooden or steel rammers,and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes capacity including all leads and lift (payment will be made based on level measurement)

Code No.4.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement: 2coarse sand : 4 graded stone aggregate 20mm nominal size)

Code No.4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 cement:3coarse sand : 6 graded stone aggregate 20mm nominal size)

Code No.4.1.10 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand : 10 graded stone aggregate 40mm nominal size)

Code No.4.3.1 Centring and shuttering including strutting, propping etc.and removal of form for:Foundations , footings, bases for columns.

Code No.10.25.2 Steel work welded in built up sections /framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder,railings, brackets,gates and similar works.

Code No.13.16.1 6mm cement plaster of mix Cement mortar 1:3 (1 cement : 3 fine sand)

Code No.7.23A MO Providing and fixing premoulded bitumenjoint filler, for expansion joints including the cost of sealing compound and priming coat - 12 mm wide

Code No.4.1A.1 Construction of granular sub-base by providing close graded material, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site, spreading in uniform layer with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401of MoRTH specification, 4th Revision - by plant mix method for grading I material.

S Mogan

Ramya