Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.1 CrAccepted-AOC K 4 FIVE STAR INDUSTRIAL AREA MIDC BUTIBORI NAGPUR 441 122 | NAGPUR | NAGPUR | MAHARASHTRA | 441122 | ₹3.1 Cr | L1 | Accepted-AOC Stood L1 after negotiation |
| Sl No | Description | Qty | Unit | EM Services (I) Pvt. Ltd. L1 |
|---|---|---|---|---|
| 1.00SECTION-A1 CLEANING OF BOILER | ||||
| 1.01 | COMPLETE EXTERNAL CLEANING OF BOILER FROM TOP TO BOTTOM | 1 | 1 JOB | 1,18,000 ₹1,18,000 Lowest |
| 1.02 | INTERNAL CLEANING OF BOILER IN SECOND PASS | 1 | 1 JOB | 1,77,000 ₹1,77,000 Lowest |
| 1.03 | CLEANING OF ASH FROM ECONOMISER HOPPER | 1 | 1 JOB | 2,59,600 ₹2,59,600 Lowest |
| 1.04 | CLEANING OF PENT HOUSE, WIND BOX AND CAT HOUSE, DOG HOUSE & DEAD CHAMBER, | 1 | 1 JOB | 88,500 ₹88,500 Lowest |
| 1.05 | CLEANING OF EMERGENCY COOLING WATER SUPPLY TANK FOR BCW MOTOR | 1 | 1 JOB | 47,200 ₹47,200 Lowest |
| 1.06 | BOTTOM ASH HOPPER CLEANING | 1 | 1 JOB | 88,500 ₹88,500 Lowest |
| 2.00SECTION-A2 PREPARATION OF SCAFFOLDING | ||||
| 2.01 | BOILER HORIZONTAL PASS (SCREEN TUBES, LTSH TERMINAL) | 2 | 1 JOB | 1,77,000 ₹3,54,000 Lowest |
| 2.02 | ABOVE ECONOMISER HOPPER FOR INSPECTION OF ECONOMISER LOWER BANK COILS & C-HEADER. | 1 | 1 JOB | 1,59,300 ₹1,59,300 Lowest |
Tender Value
₹2.8 Cr
EMD Value
₹2.8 L
Closing Date
5 Aug 2024, 3:30 pmClosed
SE(Works)
O/o Addl.C.E.(PnW)
Work of Overhauling for Boiler Pressure Part of Unit-1 at 2X600 MW, Stage-I, SSTPP, MPPGCL, Dongalia
2024_MPPGC_359607_1
WT-2419
Open Tender
Miscellaneous Works
Item Rate
45 days
SSTPP, Dongalia
As per NIT
19 documents required · 19 mandatory
₹5,000
Yes
₹2.8 L
Yes
23 Sept 2025
25 Jul 2024
7 Aug 2024
25 Jul 2024
5 Aug 2024
25 Jul 2024
SECTION-A1 CLEANING OF BOILER
COMPLETE EXTERNAL CLEANING OF BOILER FROM TOP TO BOTTOM
INTERNAL CLEANING OF BOILER IN SECOND PASS
CLEANING OF ASH FROM ECONOMISER HOPPER
CLEANING OF PENT HOUSE, WIND BOX AND CAT HOUSE, DOG HOUSE & DEAD CHAMBER,
CLEANING OF EMERGENCY COOLING WATER SUPPLY TANK FOR BCW MOTOR
BOTTOM ASH HOPPER CLEANING
SECTION-A2 PREPARATION OF SCAFFOLDING
BOILER HORIZONTAL PASS (SCREEN TUBES, LTSH TERMINAL)
ABOVE ECONOMISER HOPPER FOR INSPECTION OF ECONOMISER LOWER BANK COILS & C-HEADER.
QUICK ERECT SCAFFOLDING SYSTEM (CUP-LOCK SYSTEM) IN BOILER FURNACE (FROM BOTTOM TO TOP INCLUDING RH)
WIND BOX IN ALL FOUR CORNER
CAT HOUSE FOR FRONT/REAR S-PANEL BACKSIDE CHECKING, REPAIRING
BOTTOM ASH HOPPER UP TO S-PANEL TUBES
SECTION-A3 INSPECTION
INSPECTION OF COMPLETE BOILER PRESSURE PARTS (1ST & 2ND PASS)
INSPECTION & REPAIR OF ALL DOORS ,WINDOWS AND PEEP HOLES IN BOILER
INSPECTION OF RING HEADER & REFIXING/REPLACEMENT OF STRAINERS & ORIFICES
INTERNAL INSPECTION & CLEANING OF BOILER DRUM
SERVICING OF SECONDARY AIR DAMPERS
DYE PENETRATION TEST (DP TEST) WITH KIT (1sq. Inch = 645 sq. mm)
TRANSPORTATION OF ASH, SCRAPS, DEBRIES AND OTHER WASTE MATERIALS (INCLUDING LOADING/UNLOADING)
HEADER INSPECTION & INSPECTION OF SPRAY NOZZLE, ATTEMPERATOR
SECTION-A4 -HYDROJET CLEANING OF COMPLETE BOILER PRESSURE PARTS COMPONENT
DIVISIONAL SUPERHEATER COILS
PLATEN SUPERHEATER COILS.
RE-HEATER COILS.
WATER WALL ( FRONT, REAR, LEFT & RIGHT)
SECTION-B
ASSISTANCE IN RADIOGRAPHY, OXIDE SCALE MEASUREMENT, MAGNETIC PARTICLE INSPECTION (MPI), STRESS RELIEVING, BOROSCOPIC ETC.
ASSISTANCE IN HYDRAULIC TEST OF BOILER PRESSURE PART & PREPARATION FOR BOILER LIGHT UP
RECTIFICATION, REPLACEMENT AND REFIXING OF PROTECTION SLEEVE (SHIELDING) IN VARIOUS AREAS OF BOILER TUBES.
RECTIFICATION, REPLACEMENT AND REFIXING OF CASSETTE BAFFLES IN VARIOUS AREAS OF BOILER TUBES.
REPAIR & REFIXING OF PROTECTION PLATE OVER LTSH/ECO COIL BENDS (1000X300X5)MM
PREPARATION OF BOILER TUBE SURFACE FOR TUBE THICKNESS SURVEY/ OXIDE SCALE MEASUREMENT/ STRESS RELIEVING
WELDING OF HP JOINTS OF BOILER TUBES
WATER WALL TUBES, SCREEN TUBES, HANGER TUBES, REAR ARCH TUBES ETC.
REPLACEMENT OF WW BURNER PANEL TUBES
STEAM COOLED WALL TUBES
DIVISIONAL SUPERHEATER TUBES
PLATEN SUPERHEATER TUBES
SUPERHEATER STEAM COOLED SPACER TUBES
PENDANT REHEATER FRONT & REAR
REHEATER CROSS OVER TUBES
REHEATER STEAM COOLED SPACER TUBES
LTSH TUBES
LTSH SUPPORT TUBES
ECONOMISER TUBES
ECONOMISER SUPPORT TUBES
ROOF TUBES
HEADER STUBS
HYDRASTEP TUBES
INSTRUMENT PIPINGS
WELDING & REPLACEMENT OF DRAIN & VENT JOINTS
WELDING & REPLACEMENT OF TRACING LINE / SAMPLING LINE
WELDING OF FINS
RE-ENFORCEMENT OF WELDED JOINTS
ALIGNMENT OF COILS/ TUBES
ALIGNMENT OF COILS OF DIVISIONAL SH PANEL
ALIGNMENT OF COILS OF PLATEN SUPERHEATERS
ALIGNMENT OF REHEATER COIL (FRONT/ REAR)
ALIGNMENT OF COIL OF LTSH (UPPER / LOWER)
ALIGNMENT OF COIL OF ECONOMISER (UPPER / MIDDLE / LOWER)
ALIGNMENT & SERVICING OF WALL BLOWERS
ALIGNMENT & SERVICING OF LONG RETRACTABLE SOOT BLOWER
CHECKING AND RECTIFICATION OF EXPANSION INDICATOR IN BOILER AREA
SHIFTING OF ECONOMISER COIL ( COMPLETE MODULE) SFROM ITS POSITION TO ABOVE AND AFTER CHECKING & REPAIRING REPOSITIONING OF THE SAME
SHIFTING OF LOW TEMPRETURE SUPERHEATER (LTSH) COIL ( COMPLETE MODULE) SFROM ITS POSITION TO ABOVE AND AFTER CHECKING & REPAIRING REPOSITIONING OF THE SAME
SECTION-C1 GLAND PACKING OF HP VALVES
UPTO 25 MM
25 MM TO 50 MM
50MM TO 100 MM
ABOVE 100 MM
SECTION-C2 COMPLETE SERVICING OF VALVES (EXCLUDING ACTUATOR):
UPTO 25 MM
25 MM TO 50 MM
50 MM TO 100 MM
ABOVE 100 MM
SECTION-C3 REPLACEMENT OF VALVES (WELDED TYPE)
UPTO 25 MM
25 MM TO 50 MM
50 MM TO 100 MM
ABOVE 100 MM
SECTION-C4 ASSISTANT IN REMOVAL/INSTALLATION OF ACTUATORS OF HP VALVES
SECTION-C5 SERVICING OF MAIN STEAM STOP VALVE
SECTION-C6 COMPLETE SERVICING OF SPRING LOADED SAFETY VALVES (SV)
BOILER DRUM SV
MAIN STEAM LINES SV
CRH LINES SV
HRH LINES SV
SECTION-C7 ELECTROMATIC RELIEF VALVE AND PILOT VALVE
SECTION-C8 CLEANING / REPAIRING OF SAFETY VALVE DRAIN TRAY & LINE
SECTION-C9 SERVICING OF ECONOMISER NON-RETURN VALVE (NRV) SIZE-550 MM
SECTION-D1 PREPARATION / FABRICATION OF HP TUBE BENDS
SECTION-D2 REPAIR AND RE-FIXING OF SEAL PLATES OF S-PANEL AT BOTTOM ASH TROUGH SEAL
SECTION-D3 REPAIR AND RE-FIXING OF REFRACTORY COOLING PIPE OF BOTTOM ASH HOPPER AT TROUGH SEAL.
SECTION-D4 REPAIR OF PENT HOUSE OF BOILER
REPAIR OF PENT HOUSE BY PATCHING (WITHOUT STEEL)
DISMANTELING OF STEEL STRUCTURES/INSTALLATION OF NEW STEEL STRUCTURES (WITH STEEL)
SECTION-D5 REPAIR OF WIND BOX
REPAIR OF WIND BOX BY PATCHING (WITHOUT STEEL)
DISMANTELING OF STEEL STRUCTURES/INSTALLATION OF NEW STEEL STRUCTURES (WITH STEEL)
SECTION-D6 REPAIRING OF DEAD CHAMBER
REPAIR OF DEAD CHAMBER BY PATCHING
DISMANTELING OF STEEL STRUCTURES/INSTALLATION OF NEW STEEL STRUCTURES (WITH STEEL)
SECTION-D7 REPAIRING OF CAT HOUSE
REPAIR OF CAT HOUSE BY PATCHING
DISMANTELING OF STEEL STRUCTURES/INSTALLATION OF NEW STEEL STRUCTURES (WITH STEEL)
SECTION-D8 REPAIR & SERVICING
BUCKSTAYS
DIAMOND TYPE LOCKS
ROCKERS
SECTION-D9 DISMNETLING, INSTALLATION, FEBRICATION OF STRUTURE & MISC. WORKS I.E. CANOPY, BROKEN STAIR/RAILING/DRAIN COVERING ETC.
SECTION-D10 INSTALLATION OF MITP
SECTION-D11 SERVICING, CLEANING & REPAIRING OF SAMPLING LINE COOLERS
SECTION-D12 CLEANING, SERVICING & REPAIRING OF HANGERS & SUPPORTS
SECTION-E1 FIXING OF CORRUGATED GI SHEET AT BOILER ROOF & OTHER PLACES
SECTION-E2 PAINTING OF BOILER BASE STRUCTURE/STAIR RAILING/COOLING PIPING ETC.
SECTION-E3 APPLICATION OF REFRACTORY
APPLICATION OF REFRACTORY AT VARIOUS LOCATIONS OF BOILER (GRADE A)
APPLICATION OF REFRACTORY AT VARIOUS LOCATIONS OF BOILER (GRADE C/P)
APPLICATION OF PLASTIC REFRACTORY AT VARIOUS LOCATIONS OF BOILER
SECTION-E4 REMOVAL / BREAKING OF DAMAGED REFRACTORY & TRANSPORTATION
SECTION-E5 THERMAL INSULATION WORK
REMOVAL & APPLICATION OF THERMAL INSULATION (THICKNESS 100 MM)
REMOVAL & APPLICATION OF THERMAL INSULATION (THICKNESS 50 MM)
SECTION-E6 DISPOSAL OF RUBBISH THERMAL INSULATION
SECTION-E7 SUPPLY OF NEW PLAIN AL SHEET OF 22 G
SECTION-F1 Work of installation and implementation of CCTV surveillance system during AOH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .