Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.2 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹54.9 L+₹11.7 L (27.1%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹62.1 L+₹18.9 L (43.8%)Admitted-Finance | L3 | Admitted-Finance | |
| 4 | L4₹62.7 L+₹19.5 L (45.2%)Admitted-Finance | L4 | Admitted-Finance | |
| 5 | Rejected-Technical | - | Rejected-Technical Docs Not submitted as per NIT |
| Sl No | Description | Qty | Unit | ISHFAQ ABDULLAH BHAT L3 | ROHAIL RASHID PARRAY L1 | AJS CONSTRUCTION GROPU L4 | Bashir Ahmad Sheikh L2 |
|---|---|---|---|---|---|---|---|
| 1.00Note: Contractor should Quote Rates with all taxes. | |||||||
| 1.01Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, rolling with 3 wheeled raod/ vibratory roller 8 - 10 tn capacity in stages to proper rade and camber, applying and brooming requisite type of screing/ binding material to fill up intersites of course aggregate, watering and campacting to the required desity | |||||||
| 1.02 | Graded quarry stone aggregate of sizes 63mm to 45 mm size | 80.89 | M3 | 1,100 ₹88,979 | 1,000 ₹80,890 Lowest | 1,300 ₹1,05,157 | 1,550 ₹1,25,379.5 |
| 1.03 | Supply and stacking at site graded quarry stone agregate of size 63mm to 45mm | 80.89 | M3 | 900 ₹72,801 Lowest | 1,000 ₹80,890 | 1,500 ₹1,21,335 | 1,550 ₹1,25,379.5 |
| 1.04 | Supply and stacking of stone screening/ chipping at site of size 13.2mm type B | 18.6 | M3 | 100 ₹1,860 Lowest | 1,000 ₹18,600 | 800 ₹14,880 | 1,420 ₹26,412 |
| 1.05 | P/L spreading and compacting graded stone aggregate (size range 53mm to 0.75mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical, mix plant carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical apver finixher in sub-base / base course on well prepred surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired denisty complete as per specifications and directions of Engineer in Charge. | 364.51 | M3 | 1,450 ₹5,28,539.5 | 1,156 ₹4,21,373.56 Lowest | 1,600 ₹5,83,216 | 1,300 ₹4,73,863 |
| 1.06 | Providing and applying tack coat using hot straight run bitumen of VG-10 grade including heating the bitumen, sprayning the bitumen with mechanically operated spray unit filled in bitumin boiler after cleaning and preparing the existing surface to remove all dirt, dust, mud etc., and finally brimming the surface as per required specification of BT surface. | 7,335.25 | M2 | 45 ₹3,30,086.25 | 44 ₹3,22,751 | 25 ₹1,83,381.25 Lowest | 48 ₹3,52,092 |
| 1.07 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers,laidover a previosly prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers as per specifications to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in batch type HOT MIX Plant of 100 120 TPH capacity. | 366.76 | M3 | 7,000 ₹25,67,320 | 5,000 ₹18,33,800 Lowest | 7,100 ₹26,03,996 | 6,200 ₹22,73,912 |
| 1.08 | Providing and laying semi - dense bituminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 25mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type HOT MIX Plant pf 100 120 TPH capacity. | 7,335.25 | M2 | 260 ₹19,07,165 | 145 ₹10,63,611.25 Lowest | 270 ₹19,80,517.5 | 195 ₹14,30,373.75 |
| 1.09 | Providing and laying seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve with 128 kgs) bitumen of VG-10 grade per Cum of fine aggregate and 0.60 cum of fine aggregate per 100 Sqm of road surface including rolling and finishing complete as per MOST specification. | 7,335.25 | M2 | 70 ₹5,13,467.5 | 35 ₹2,56,733.75 Lowest | 60 ₹4,40,115 | 67 ₹4,91,461.75 |
Tender Value
₹74.4 L
EMD Value
₹1.5 L
Closing Date
18 Sept 2025, 4:00 pmClosed
Executive Engineer
Office of the Executive Engineer Div 2nd JK SIDCO Haftchinar
Development of internal Link Roads link K Spine parallel roads newly upgraded link roads with WMM wet mix 50mm thick bituminous macadam and 25mm thick semi dense with 6mm thick seal coat at IGC Lassipora
2025_SIDCO_287162_1
SIDCO/Constt/Div/2nd/025/07 SI
Open Tender
Civil Works - Roads
Item Rate
10 days
Lassipora
as per NIT
4 documents required · 4 mandatory
₹5,000
Executive Engineer Div 2nd Haftchinar
₹1.5 L
24 Sept 2025
8 Sept 2025
19 Sept 2025
8 Sept 2025
18 Sept 2025
9 Sept 2025
Amount
Note: Contractor should Quote Rates with all taxes.
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, rolling with 3 wheeled raod/ vibratory roller 8 - 10 tn capacity in stages to proper rade and camber, applying and brooming requisite type of screing/ binding material to fill up intersites of course aggregate, watering and campacting to the required desity
Graded quarry stone aggregate of sizes 63mm to 45 mm size
Supply and stacking at site graded quarry stone agregate of size 63mm to 45mm
Supply and stacking of stone screening/ chipping at site of size 13.2mm type B
P/L spreading and compacting graded stone aggregate (size range 53mm to 0.75mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical, mix plant carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical apver finixher in sub-base / base course on well prepred surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired denisty complete as per specifications and directions of Engineer in Charge.
Providing and applying tack coat using hot straight run bitumen of VG-10 grade including heating the bitumen, sprayning the bitumen with mechanically operated spray unit filled in bitumin boiler after cleaning and preparing the existing surface to remove all dirt, dust, mud etc., and finally brimming the surface as per required specification of BT surface.
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers,laidover a previosly prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers as per specifications to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in batch type HOT MIX Plant of 100 120 TPH capacity.
Providing and laying semi - dense bituminous concrete using crushed stone aggregates of specified grading premixed with bituminous binder and filler, transporting the hot mix to work site by tippers,laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem road rollers to achieve the desired compaction and denisty, complete as per the specifications and directions of Engineer-in-Charge with of 25mm compacted thickness with bitumen of grade VG-10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of aggregate) prepared in batch type HOT MIX Plant pf 100 120 TPH capacity.
Providing and laying seal coat of premixed fine aggregate (passing 2.36mm and retained on 180 micron sieve with 128 kgs) bitumen of VG-10 grade per Cum of fine aggregate and 0.60 cum of fine aggregate per 100 Sqm of road surface including rolling and finishing complete as per MOST specification.
Scarifying te existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and leads upto 1 km (by mechanical means)
Providing and Laying non-pressure NP3 class (ligt duty) RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc., complete 1000mm dia RCC pipe inlcuding cushion over the RCC pipes below over the RCC pipes complete.
Carraige of all materials fom source to site of work by mechanical mens including loading, unloading, stacking complete
Bashir Ahmad Sheikh (BID ID -2514370)
ISHFAQ ABDULLAH BHAT (BID ID -2525071)
AJS CONSTRUCTION GROPU (BID ID -2500459)
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .