Civil work at Devanur

Amount

Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., complete including cost of all materials lead lift etc complete as directed by the department engineer at site.

Providing and laying P.C.C. 1:3:6 using 40mm HBG metal for foundation including cost of all materials, curing,labour, lead, Lift, labour for laying concrete etc., complete as per standard specification and as directed by the department engineer at site. without form work

Providing and laying P.C.C 1:2:4 using 20mm HBG metal for foundation without form work including cost of form work ,all materials, transport, curing, labour, lead,and lift etc. complete.as per standard specification as directed by the dept. Engineer at site

Providng and laying R:C:C 1:1.5:3 using 12 to 20mm HBG metal for without form work raft concrete including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site

Providing and laying R:C:C 1:1.5:3 using 12 to 20mm HBG metal for Column below GL with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

Providing and laying R:C:C 1:1.5:3 using 12 to 20mm HBG metal for Column above GL with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site.

Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site.

Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site .

Colour washing two coats using cement paint outside wall over one coat of white washing including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site.

Supplying and fixing MS angles 75 x 75 x 6mm 2.70m MS angle for cable duct including the cost of cutting to required length, fixing in position and all materials, labour, lead, lift, etc.,complete and as directed by the department engineer at site.

Suppllying fixing PVC coated chain link fencing 50 X 50mm square ( 12g ) including cost of GI binding wire all materials transport, labour, lead, lift, etc., complete as direted by the departmental Engineer at site.

Fabricating and supplying fixing 4.8m wide MS gates as per standard specification two coats of enamel paint over red oxide including cost of all materials, labour, lead, lift, etc complete as direted by the departmental Engineer at site.

Supplying and fixing best quality 70W sodium vapour or 125W mercury gate light ISI make with all fittings including cost of material, labour, lead, lift, etc., complete as directed by the department engineer at site.

Wiring with 2 x 1.5 Sqmm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box in flush with wall with 5A F.T.Switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for gate light inclluding cost of all materials lead, lift, etc., complete - (SD - 23)

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)

MK DHANALAKSHMI ENGINEERING PRIVATE LIMITED