REPAIR TO COMPOUND WALL, FENCING, DRAIN AND PATH NEAR SUPPLY DEPOT, JAT AND MES INSTALLATIONS UNDER AGE (I) AYODHYA CANTT

Amount

Taking down cement plaster from brick walls including raking out joints, hacking for key, scrubbing down with water to receive plaster removal of rubbish off the premises etc complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surface, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge.

M&L for preparing old decorated surfaces of walls and applying one coat of cement base paint complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description and fixed in any position complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer over complete all as specified and directed by Engr-in-Charge.

M&L for brick work with old size subclass 'B' bricks built in cement mortar (1:6), straight or curved on plan to any radius complete all as specified and directed.

M&L for brick work with old size subclass 'B' bricks built in cement mortar (1:4) in half brick thick walls, straight or curved on plan exc 6 m mean radius complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) posts embedded natural ground etc any section including taking out embedded portion and making good to distrubed ground complete all as specified and directed by Engr-in-Charge.

Excavation in post holes each n.exc 0.50 Cum and getting out in soft/loose soil including returning, filling in and ramming earth etc and removing surplus soil to a distance n exc 50 M and making good surface complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed by Engr-in-Charge.

M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in lintel upto 1.5m clear span, cill, steps, seismic and other similiar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, bed plates, copings, kerbs, etc. water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

S&F mild steel work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters, running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complete all as specified and directed by Engr-in-Charge.

Supply only chain link MS galvanised fencing of any size or type complete all as specified and directed by Engr-in-Charge.

Fixing only in repairs, chain link fencing including line wires, any mesh size and fixed to any type of standards including provision of binding wire etc complete all as specified and directed by Engr-in-Charge.

S&F mild steel machnie made screw bolts 5 to 10mm diameter of shank, n.exc 5 cm long with hexagonal screw head at one end & screwed the other or screwed both ends, each screwed end to be fitted with washers & one hexagonal or square nut, complete all as specified and directed by Engr-in-Charge.

S&F in repairs, galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and straning and fixing to any type of standard rails staraining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and directed by Engr-in-Charge.

S&F mild steel round bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia complete all as specified and directed.

M&L for precast cement concrete (1:2:4), type B1 (using 20 mm graded stone aggregate) in window or door cills, lintels, steps coping, kneelers, pier caps, columns, posts, cover slab etc. and setting in mortar (1:4) with joints to match complete all as specified and directed by Engr-in-Charge.

S&F TMT steel bars 10 mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

S&F TMT steel bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia or with securing clips complete all as specified and directed by Engr-in-Charge.

Dismantling of stone slabs and tiles of any description or thickness in floors aprons etc, laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for 20 mm thick granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and the like, laid over & including 20 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and drilling hole for gas pipe in precast slab as well as in stone slab in cooking platform complete all as directed by Engr-in-Charge.

Rounding to edges of granite stone slab on exposed edges, laid as in steps, cooking platforms and other similar situations complete all as directed by Engr-in-Charge.

M&L for 60mm thick machine pressed precast coloured concrete interlocking paver block of any shape using M-35 Grade concrete with grey cement and pigment, conforming to IS-15658-2006, laid dry over sand cusuioning complete all as specified and directed by Engr-in-Charge. Note:- Sand for cusioning shall be measured and paid for separately.

All as per Srl item No. 29.00 above but execpt precast concrete interlocking paver blocks/tiles complete all specified and directed by Engr-in-Charge.

M&L for sand filling under floors, cushioning to paver blocks / tiles or filling in foundation etc including watering and consolidation complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick screed bed or bedding layer in cement mortar (1:6) for laying further floor finishes all as directed by Engr-in-Charge.

M&L for non skid coloured heavy duty (Jhonson Endura) tiles 08 to 10 mm thick of sqaure in size 300mmx300mm / 400mmx400mm, laid in floors etc complete all as specified and directed by Engr-in-Charge. Make : Jhonson Endura (combination of flocept light/ flocept dark tiles) or other equivalent as approved by AGE (I).

Dismantling floor, hearth or wall tiling including CM bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured tiles of size 350x250x 7 mm / 450x350x7mm thick in vertical surface such as ext wall cladding etc, laid over & including 10mm thick rendering in cement mortar (1:3), set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level) complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (unreinfoced) of any description and in any position not otherwise specifically provided for complete all as specified and directed by Engr-in-Charge.

M&L for 75 mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in floors / Pavings/ sub base etc complete all as specified and directed by Engr-in-Charge.

M&F for cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in surface channel and drains, finishied the surfaces even and fair complete all as specified and directed by Engr-in-Charge.

M&L for 100 mm thick PCC (1:2:4) type B2 (using 40 mm graded stone aggregate) as in floors / Pavings / hardstanding etc, finishing the surface even and fair as specified, joint filled with mix of bitumen and sand in (1:3) complete all as specified and directed by Engr-in-Charge.

Dismantling posts or struts (wood, steel or RCC) posts embedded in cement concrete etc of any section including taking out embedded portion and making good to distrubed surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparing old decorated plastered or unplastered surfaces of brick, stone or concrete work of any description and applying one coat of plastic emulsion paint complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing decorative treatment on concrete or plastered surfaces of any description and applying two coats of weather proof paint complete all as specified and directed by Engr-in-Charge.

ABC CONSTRUCTION CO. (BID ID -3144851)

K R KAUSHAL AND SONS (BID ID -3145851)

His And Her Enterprises (BID ID -3145602)

R K BROTHERS (BID ID -3144710)

JYOT BUILDERS (BID ID -3146967)

disha construction (BID ID -3146831)

MISRA TRADING CORPORATION (BID ID -3147902)