Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.6 LAccepted-AOC | L1 | Accepted-AOC FIRST LOWEST BIDDER | |
| 2 | L2₹34.4 L+₹1.6 L (4.79%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER |
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
26 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin 901208 c/o 56 APO
COMPREHENSIVE MAINT AND REWIRING TO CERTAIN BUILDINGS AT DIFFERENT LOCATIONS UNDER GE NAGROTA
2023_MES_597125_1
GEN-8541/2023-24
Open Tender
Civil Works
Item Rate
270 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Nagrota
₹99,800
Yes
7 Jul 2023
20 May 2023
3 Jul 2023
20 May 2023
26 Jun 2023
8 Jun 2023
Amount
SCHEDULE ‘A’ PART-I Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc.complete all as specified & directed.
Material & Labour Brick work with sub class 'B' bricks built in CM 1:6 straight or curved on plan exc 6 m mean radius .complete all as specified & directed.
Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.complete all as specified & directed.
Material & Labour for Rendering 10 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified & directed.
Material & Labour for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified & directed. Note: water proofing compound shall be measured & paid seprately.
Supply only liquid water proofing compound complete all as specified & directed.
Material & Labour for Preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 1mm thick preparatory to distempering complete all as specified & directed.
Material & Labour for priming new surface of wall with alkal iresistant priming paint of and applying two coats of cement base paint complete all as specified & directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed..
Material & Labour Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwscomplete all as specified & directed.
Supply & Fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets/AC boards etc any thickness complete all as specified & directed.
Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified & directed.
Supply & Fix 8mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified & directed.
Supply & Fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified & directed..
Supply & Fix Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as spd and directed.
Taking down Chowkats or frames n. exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified & directed. .
Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame).complete all as specified & directed.
Taking down Shutter exceeding 1.0 Sqm but not exceeding 2.00 Sqm each.complete all as specified & directed.
Taking down Shutter exceeding 2.0 Sqm each.complete all as specified & directed.
Supply & Fix Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces all as specified and directed.
Supply & Fix 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified & directed.
Supply & Fix 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified & directed.
Supply & Fix 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commerial type of one side and another face is covered with aluminium sheet, 0.5mm thick, fixed with aluminium alloys screws complete all as specified & directed.
Material & Labour preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified & directed.
Supply & Fix Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators all as specified & as shown on drg .CEUZ/TD/1269/2008 SHT 1/1 to 1/3.complete all as specified & directed.
Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified.
Supply and Fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including all fittings complete all as specified & directed.
Supply & Fix Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified & directed.and directed
Supply & Fix Galvanised mild steel wire cloth,0.56mm nominal dia of wire and average width of aperture 1.00mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & directed.
Supply & Fix Powder coated Anodised aluminium frame(Thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified & directed.
Supply & Fix Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified.
Supply & Fix Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified & directed.complete all as specified & directed.
Supply & Fix Aluminium anodised handle extruded section of size 150mm complete all as specified & directed.
Supply & Fix Aluminium anodised handle extruded section of size 125mm complete all as specified & directed.
Supply & Fix 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified & directed.
Supply & Fix Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified & directed.
Supply & Fix Aluminium anodised barrel tower bolts extruded section of size 200 mm, all as specified and directed.
Supply & Fix Aluminium anodised barrel tower bolts extruded section of size150 mm, all as complete all as specified & directed.
Supply & Fix 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.
Supply & Fix 5.5mm thick plain sheet glass as in window and door shutters with and including rubber gasket and natural colour anodized 15micron snap on aluminium beading/glazing, clips etc complete all as specified & directed.
Supply & Fix Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as spd and direcetd.
Securing glass of any description in existing glass in metal frames glazed with putty/ beads including removing loose or decayed putty/ beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work complete all as specified & directed. Note : New length of frame reputtied shall be Measured & paid
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified & directed.
Supply & Fix 3 mm thick sheet glass pin headed quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane all as specified and directed.
Supply & Fix sheet glass ordinary quality 3 mm thick in squares n exc 0.5 sqm each pane and glazing with complete all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.
Demolition of floor concrete in ground floors and pavings n exc15 cm thickness (below or above ground level) complete all as specified & directed.
Material and Labour for Non - skid coloured eramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over25 mm thick PCC 1:2:4 type B0 complete all as specified & directed.
Material and Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & incl Screed bed or bedding layer of mortar 10 mm thick for laying floor finishes over & incl 25 mm thick PCC 1:2:4 type B0 complete all as specified & directed.
Material & Labour vitrified tiles double charged,10 mm thick ,area of each tile exc 0.36 Sqm but n.exc 0.42 sqm, in floor etc set and jointed in neat cement slurry over & incl 15 mm screed bed CM 1:4 over & incl 25 mm thick PCC 1:2:4 type B0 complete all as specified & directed.
Material & Labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over & incl 10mm thick plaster in CM 1:4 finished even & rough to receive tiles complete all as specified & directed.
Supply & Fixed in repairs fancy type Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified & directed.
Supply & Fixed in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified & directed.& directed.
S & F in repairs cast aluminium (extruded section body) door closer by hydraulically regulated, designation No.3 univrsal type, suitable for door shutters up to 851mm to 1000 mm in width and of weight between 61 to 80 kg fixed complete alll as specified and directed.
Supply & Fixed in repairs 15 mm Stop valves, fancy type, chromium platedcast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
Supply & Fixed in repairs gratting 125 mm dia with waste hole of PTMT (Min weights 40 gms) complete all as specified & directed.
Supply & Fixed in repairs CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union complete all as specified & directed.
Supply & Fix PVC connections 15mm size 600 mm long as fixed in repairs complete all as specified & directed.
Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified & directed.
Supply & Fixed in repairs brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 15mm
Supply & Fix brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified & directed.
Dismantling water tanks and removing to store capacity exceeding 250 ltrs and not exceding 500 ltrs complete all as specified & directed.
Dismantling water tanks and removing to store capacity exceeding 500 ltrs and not exceding 1000 ltrs complete all as specified & directed.
Supply & Fix rotational moulded PVC water tank double layered (Cylindrical vertical with closed top) 1000 ltrs capacity hoisted and fixed in positoin complete all as specified & directed.
Supply & Fix rotational moulded PVC water tank double layered (Cylindrical vertical with closed top) 500 ltrs capacity hoisted and fixed in positoin complete all as specified & directed.
Supply & Fix in repairs PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 lits capacity. complete all as specified & directed. Make : Parryware Slimline standard Code No C8297 or equivalent make as specified in PS
Supply & Fix in repairs vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover Code No.: C8094 but excluding flushing cistern and flush pipe of complete all as specified & directed. Make Parryware "Niagara" Code No C0252 or equivalent make as specified in PS
Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests complete all as specified & directed. Make : Parryware Cat Pt No C0117 or equivalent make as specified in PS
Supply & Fixed in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified & directed.
Supply & Fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 110 mm inclding dismantling of old U/S pipes complete all as specified & directed.
Supply & Fix PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls Bore 75 mm inclding dismantling of old U/S pipes complete all as specified & directed.
Supply & Fixed in repairs PVC (SWR) bends 75 mm dia radius complete all as specified & directed.
Supply & Fix in repairs PVC (SWR) bends 110 mm dia radius complete all as specified & directed.
Supply & Fix in repairs PVC (SWR) vent cowl 75 mm dia complete all as specified & directed.
Supply & Fix in repairs vitreous china WHB white, size 550 x 400mm including cast iron brackets, waste pipe of 32 mm dia and waste fittings, pillar tap brass, chromium with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or remova to store complete all as specified & directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified & directed.
S& F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors. complete all as specified & directed.
Supply & Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified & directed.
Supply and fix of Brass chromium plated 15mm wall mixer valve 3-in-1 for mixing hot and cold water, fancy type complete all as specified & directed. Make : Jaquar cat aprt No 29281 or or equivalent make as specified in PS
Supply and Fix in repairs Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated complete all as specified & directed. Make : Jaquar cat aprt No HF 3342 or or equivalent make as specified in PS
S&F Cabinet Mirror PTMT 12.5D*44.6W*55.3H cm with sided shelves fancy type of superior quality complete all as specified & directed.
S&F 32mm dia PVC waste pipe for WHB 750mm long fixed in repairs.complete all as specified & directed.
S & F corner glass shelf superior quality matt finished crromium plated (MCH/Colour CP ) with bracket and fittings complete all as specified & directed. Make : Jaquar cat part No 1175 or equivalent make as specified in PS
Supply and fix soap dish ,matt finished chromium lated (MCH/Colour) complete all as specified & directed. Make : Jaquar cat part No Continental Wall Mounted ACN-CHR-1131N Soap Dish Holder or equivalent make as specified in PS
Supply and fix glass shelf matt finished chromium plated (MCH/Colour CP) complete all as specifid and directed. Make : Jaquar cat part No Continental Wall Mounted ACN-CHR-1171N 600 mm Glass Shelf or equivalent make as specified in PS
S&F plastic water closet seat cover, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device of make fixed with CI brackets fixed in repairs.complete all as specifid and directed.
Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified & directed. Make : Cera cat part No F2002201 or equivalent make as specified in PS
SCHEDULE ‘A’ PART-II Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit complete all as specified & directed.
M&L for point wiring in repair with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including PVC casing-caping not less than 32x16 mm ISI marked ivory colour with all fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches, sockets, fan regulators as required for one light point / bell point / fan point controlled by one switch. complete all as specified & directed.
All As per Srl item N0 92 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .
All As per Srl item N0 92 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .
All as per item No 92 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.
S&F angle holder insulated polycabonate body with back plate complete all as specified & directed.
S&F switch piano flush button single pole one way 6 amp complete all as specified & directed
S&F switch piano flush button single pole one way 16 amp complete all as specified & directed.
S&F bell push, flush type, 6 amp 240 volts complete all as specified & directed.
S&F door bell, AC, 240 volts, single pole complete all as specified & directed.
S&F socket outlet 2 in 1, 3 pin 6 & 16 amp flush type complete all as specified & directed.
S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified & directed.
S&F ceiling rose 3 plates polycarbonate body complete all as specified & directed.
S&Fin repair hum free electronic step fan regulator 120 - 280 volts of 100 watt capacity (socket type) including connecting up complete all as specified & directed.
M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sq mm as earth continuity conductor connected to common earth and earth dolly complete as specified and directed.
M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to common earth and earth dolly complete as specified and directed.
M&L for earthing with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I connected to earthing point and testing on completion with and including 15 mm bore light grade G.I. protection pipe (upto 7.5 metre beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C1 with RCC 1:2:4 type B-1 40 mm thick cover reinforced with 6 mm dia M.S bars 3 nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore light grade G.I. watering pipe, common salt and charcoal filling, necessary excavation and earth work in any type of soil complete as specified and directed.
S&F in repair 40 amp, single pole and neutral, socket outlet, with 2 pole and earth, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for the socket outlet with and including one number single pole 'C' series MCB 16 amp as required complete as specified and directed.
S&F in repair MCB distribution board SPN 240 volts, 4 ways, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete as specified and directed.
S&F in repair MCB distribution board SPN 240 volts, 8 ways, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete as specified and directed.
S&F in repair MCB distribution board SPN 240 volts, 12 ways, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete as specified and directed.
S&F in repair MCB distribution board TPN 415 volts, 4 ways, powder coated, CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete as specified and directed.
S&F in repair MCB Single pole 6 to 32 amp. 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBscomplete as specified and directed.
S&F in repair MCB double pole 10 to 32 amp. 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete as specified and directed.
S&F in repair MCB double pole 40 to 63 amp. 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete as specified and directed.
S&F in repair MCB four pole 40 to 63 amp. 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs complete as specified and directed. Note for MCBs & MCB DBs:- MCBs, MCBs & MCB DBs shall be of the same make.
S&F in repair LED batten made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete all as specified and directed Make Orient Cat Part No LBLN-18-C-SQ-AL or equivalent make as specified in PS
S&F in repair LED batten (2 Feet ) made of CRCA sheet housing with a PC glossy difusser and mounting accessories duly prewired connection having a nominal system lumen output of 2000 lumens at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 22 watt including driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete as specified and directed.
S&F in repair LED fixture 18 watt including connection connection complete as specified and directed. Make : Philips cat Part No . NBN 021C LED20S PSU CDL/NW GR or equivalent make as specified in PS
S&F in repair LED fixture 12 watt including connection complete as specified and directed. Make : Philips cat Part No . N 021C LED20S PSU CDL/NW GR or equivalent make as specified in PS
S&F in repair LED fixture 10/9 watt including connection complete as specified and directed. Make : Philips cat Part No . BN 021C LED20S PSU CDL/NW GR or equivalent make as specified in PS
S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminum housing & polycarbonate diffuser duly prewired connection with 0.75 sqmm PVC insulated & sheathed three core flexible multi stranded copper conductor cable all as per Philips cat ref no. WT202W LED6S PSU S1 PC or equivalent in other specified make as approved.
S&F energy efficient recessed mounted LED luminaire suitable for 2'x2' , 36 / 38 watt 230 volts , 50 Hz grid ceiling with flat diffuser and lumen output of 3300 lumens having constant current electronic driver duly connected with 0.5 sqmm white colour PVC insulated & sheathed three core flexible multi stranded copper conductor cable in renewal of any type luminaire as required complete all as specified and directed Make Orient Cat Part No LTRAQ-36-C-VD or equivalent make as specified in PS.
M&L for Servicing of ceiling fans of capacity 1200/1400mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete as specified and directed. Unserviceable parts other than specified in this item if any will be measured seperately)
M&L for Servicing of Exhaust fans of capacity 300mm to 450mm including taking down from site, dismantling, cleaning, greasing/oiling of bush and bearings, replacement of set of split pins, cotter pins, blade screws and refixing to the existing site after servicing complete all as directed . (Unserviceable parts other than specified in this item if any will be measured seperately).
M&L for Rewinding of ceiling fan motor of size 1200mm/1400mm with super enamelled copper winding wire of appropriate gauge and weight affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete as specified and directed.
M&L for Rewinding of exhaust fan/wall monting fan motor of size 300mm with super enamelled copper winding wire of appropriate gauge and weight affter cutting and removing the burnt existing winding including varnishing heating by providing fresh insulating materials complete as specified and directed.
All as per Srl Item No 127 above but for exhaust fan of size 400/450 mm of any make complete as specified and directed.
S&f in replacement ball bearing of ceiling / exhaust fan of any size and make as required with alignment of shaft and testing complete as specified and directed.
S& F in replacement of AC film capacitor 4.0 mfd, 440 volts suitable for any type ceiling fan/exhaust fan in FR plastic casing including connection complete as specified and directed.
S& F in replacemen of AC film capacitor 2.5 mfd, 440 volts suitable for any type ceiling fan in FR plastic casing including connection complete as specified and directed.
M& L for Replacement of old unserviceable fan blades made of MS sheet duly powder coated ,of type make and colour as of ceiling fan suitable for 1200mm sweep ceiling fan of any make incl all accessories complete as specified and directed.
M& L for Replacement of Blade assembly of Exhaust fan with fixing hexagonal nut of size 300 t0 450mm of any make complete all as specified & directed.. .
M& L for Replacement of iron Frame of exhaust fan 4 way with welded and painted complete all as specified & directed..
M/L Gun metal bush of exhaust fan complete all as specified & directed.
S&f in replacement of rubber reel with a pair of clamp, nuts, bolts, split pins etc suitable for ceiling fan down rods of any size and make as required complete all as specified & directed..
S&F in replacementl of PVC canopy suitable for ceiling fan of any size and make as required complete as specified and directed.
S&F in replacement of PVC insulated and sheathed flexible 3 core cable with copper conductor of size 0.5 sqmm complete as specified and directed.
S&F in replacement of down rod of ceiling fan made of GI pipe medium grade 15 mm bore of length upto 600 mm including cutting, threading, painting etc as required.complete as specified and directed.
M& L for Taking down of desert cooler fixed at any position, cleaning internally and externally by scraping all scales dirt etc and repairs to desert cooler to check leakage, tightening ( By replacing screws, nuts and bolts etc ) including painting of desert cooler with spray machine with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer, letters, Refixing of the desert cooler after necessary oilling and greasing of fan and water lifting pump complete all specified and directed
M& L for replacement Fan motor 1/6 HP, 230 volt, single phase for the existing desert cooler complete all specified and directed
M& L for replacement Water lifting pump, Vertical type,18 watts, 230 volt, 50 C/S, single phase suitable for desert coolers complete all specified and directed
M& L for replacement Side panel made out of 1.0 mm thick GI sheet, fixed with iron handle suitable for desert coolers of capacity 3000 cfm including two coats of synthetic enamel hammer tone paint over a one coat of red oxide primer on both side of panel complete all specified and directed
M& L for replacement High density polythene pipe 15 mm dia complete all specified and directed
M& L for replacement Complete steel body of desert cooler of capacity 3000 cfm duly painted with two coats of synthetic enamel hammer tone paint over one coat of red oxide primer . The body of desert cooler shall be fabricated as under :- ( a ) The top and bottom made out of 1.25 mm thick GI sheet. ( b ) side panels (set of three) made out 1.00 mm thick GI sheet. ( c ) Front grill of suitable size and of approved quality.
M& L for Replacement Three way water distributor, heavy duty, PVC, including necessary nuts and bolts complete and taking out old distributor complete all specified and directed
M& L for replacement of capacitor 4 mfd suitable for Desert cooler complete all as specified & directed.and directed
M& L for Re-wiring of desert cooler with suitable size of copper conductor PVC insulated cable and providing main lead three metre long of 3 core PVC insulated copper conductor of size 23/ .0076 complete all specified and directed
M& L for Dismanting and taking out Old, Unservicable fan motor from the desert cooler and Rewinding with supper enamel copper winding wire of suitable size, varnishing etc including replacement of bushes, assembling testing and refixing at the existing site complete all as specified & directed.and directed
M& L for fabrication of desert cooler stand made out of MS angle iron 40x40x6mm thick all as per existing size suitable at site incl painting ith two coats of synthetic enameld paint over a coat of red oxide primer coat complete all as specified & directed.
M& L for Repairs to voltage stabilizer of any make, single phase with input voltage 135 - 190 V and out put voltage 200-240 volt, capacity 5 KVA by dismantling and taking out burnt main transformer and rewinding with super enamelled copper wire of suitable size including varnishing and insulation material etc.complete all as specified & directed.
All as per item No 152 above but for capacity 03 KVA
All as per item No 152 above but for capacity 01 to 02 KVA
M& L for Disconnecting the inlet and outlet connections of the existing Geyser 25/50 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places as directed by Engr in charge
S&F in Replacement of unserviceable heating element of geyser 2KW/1.5 KW of any pattern all as specified
S&F in Replacement of unserviceable thermostat of geyser 2KW/1.5 KW of any pattern complete as specified and directed.
S&F in replacement of apparatus plate of geysers 25/50 litre capacity by brazing not exceeding 5 mm thick complete as specified and directed.
S&F in Replacement of unserviceable PVC flexible pipe inlet 16mm outer dia and 450 mm long for hot/cold water heavy duty with brass nuts & bolts complete as specified and directed. .
S&F in Remove the unserviceable fan blade from the condenser cooling motor and replace with new fan blade of same size and type for Water Cooler any capacity complete as specified and directed.
S&F in Replacement of unserviceable float valve with new brass Float valve of water cooiers/ desert coolers complete any make 15 mm dia complete as specified and directed.
M& L for dismantling and servicing of cooling appliances including cleaning, painting, necessary test of leakage by nitrogen gas, brazing, compressed air wash and make the system functional complete all as specified & directed.for Acs window/ Split type of any capacity complete as specified and directed. .
All as per item No 162 above but for Water Cooler of any capacity
All as per item No 162 above but for Refrigerator of any capacity
All as per item No 162 above but for Deep freezer of any capacity
S&F in Removing the unserviceable fan motor from window/Split AC any capacity removing the burnt out winding wire from slots, clean slots with emery paper and rewind the same with superior quality copper wire insulate properly and bringing back and fixing in position and testing and commissioning complete as specified and directed.
All as per item No 166 above but for Water Cooler upto 150 Ltrs capacity complete as specified and directed.
M& L for Replacement of unserviceable air filter for Split AC.complete as specified and directed.
S&F relay of Refrigerator of the same make and type.complete as specified and directed.
S&F for Disconnecting the suction and discharge line to the unserviceable compressor, replace with the new compressor brought from the factory of the same make connect the refregerent lines systems flushing vacuumising of the entire system arrest all leakages including testing and commissioning for Split AC 1.5 ton capacity complete as specified and directed. .
All as per item No-170 above but for Water Cooler above 80 LTR upto 150 Ltrs capacity
All as per item No-170 above but for Water Cooler 40 to 80 Ltrs capacity
All as per item No-170 above but for Refrigerator 165 to 185 Ltrs capacity
All as per item No-170 above but for Deep freezer 165 to 185 Ltrs capacity
M& L for replacement of unserviceable thermostat AC up to 1.5 Ton complete as specified and directed.
All as per item No-175 above but for Water Cooler upto 150 Ltrs capacity
All as per item No-175 above but for Refrigerator up to 310 Ltrs capacity
M& L for Disconnecting the inlet and outlet connections of the existing solar water heater 300 Ltr, taking down carefully, cleaning/descaling the blocks both in GI pipes and water heater refixing the bolts by proper grouting in the wall and refixing the water heater in the same or in other places complete as specified and directed. .
M& L for Replacement of unserviceable heating element of solar water heater 300 Ltr 2KW/1.5 KW of any pattern complete as specified and directed. .
M& L for Replacement of unserviceable thermostat of solar water heater 300 Ltr 2KW/1.5 KW of any pattern complete as specified and directed. .
S&F in replacement of apparatus plate of solar water heater 300 Ltr 25/50 litre capacity by brazing not exceeding 5 mm thick complete as specified and directed. .
Supply & Fix of unserviceable GI pipe inlet 25 mm outer dia hot/cold water heavy duty with brass nuts & bolts complete as specified and directed. . .
Supply & Fix of unserviceable GI pipe inlet 20 mm outer dia hot/cold water heavy duty with brass nuts & bolts complete as specified and directed. .
S&F for Removing the unserviceable fan blade from the condenser cooling motor and replace with new fan blade of same size and type for Water Cooler any capacity complete as specified and directed.
All as per item No-188 above but for Air conditioners up to 1.5 Tonne complete as specified and directed. .
S&F Blower assembly of suitable type for Air conditioners up to 1.5 Tonne. complete as specified and directed.
M& L for replacement of unserviceable float valve with new brass Float valve of water cooiers complete any make 15 mm dia complete as specified and directed.
M& L for Flushing & vacuumising the system and charging of necessary refrigerent at required quantity for Window AC/Split AC Up to 1.5 Ton complete as specified and directed.
All as per item No-188 above but for Refrigerators of any capacity.
All as per item No-188 above but for Water coolers of any capacity.
BMMJ TRADERS AND ENGINEERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .