Karnataka

Financial Eval

Works

Buildings

BALANCE WORKS TO CHALAVADI SABHA BHAVANA AT Sir M VISHWESHWARAIAH LAYOUT, BENGALURU, BENGALURU URBAN DIST.

Karnataka Residential Educational Institutions Society

KREIS Executive Engineer Section Bengaluru | Karnataka

Amount: ₹9.9 CrCloses: 26 Dec 2025Closed

Timeline

Published25 Nov 2025
Closed26 Dec 2025
Financial Evaluation—
Award—

Bids

1 Bid26 Dec 2025

#	Company	Amount	Status
1	SKS KARKALA INFRA PROJECTS PRIVATE LIMITED ₹10.4 Craccepted-finance	₹10.4 Cr	accepted-finance

Tender Value

₹9.9 Cr

EMD Value

₹14.8 L

Closing Date

26 Dec 2025, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Residential Educational Institutions Society

Contact Person

POMPAPATHY

Mobile Number

Work Description

BALANCE WORKS TO CHALAVADI SABHA BHAVANA AT Sir M VISHWESHWARAIAH LAYOUT, BENGALURU, BENGALURU URBAN DIST.

Tender Information

Tender ID

KREIS/2025-26/BD/WORK_INDENT804

Reference Number

KREIS/2025-26/BD/WORK_INDENT804

Tender Type

Open

Product Category

Buildings

Form of Contract

Two Tender Document System(Two Cover)

Location

KREIS Executive Engineer Section Bengaluru

Source Website

Subscribe to view

Documents Required

2 documents required · 2 mandatory

Technical Bid

RequiredAnnual Turnover Certificate

RequiredCompany Registration Certificate

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

The tenderer has to furnish the details of the Head Office including Telephone No.s, E-mail address, the fax and the mobile numbers of the person whom to be contacted.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The employer is not responsible for any delay in accessing E - Procurement Portal.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

Materials like bitumen,steel,cement etc.,required for the work shell be procured by the tenderer themselves and should got tested by the quality Assurance authority before use on the work.

All the formats prescribed in the bid document shall be filled by the tenderer in complete manner otherwise it will be rejected.

All scanned documents to be uploaded shall be in original, Submit the original document at the time of technical bid opening or next day and the Executive Director reserves the right to verify the original documents before approval.

If any, additional information required, the same may be obtained from the office of the Executive Director, 8, M S B-1, 6th & 7th Floor, Cunningham Road, Bangalore-52 during office hours on all working days. It may be noted that if any of the dates mentioned above happened to be a General Holiday , the next working day will be considered

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons

The contractors assessed available tender capacity shall be more than the tender value, it will be calculated as per the STD tender document Attached.

The Tender processing fee shall not be refundable.

Tenderer who qualifying in the technical bid such tenderer financial bid will be opened.

Contractor should establish a fully functional laboratory at site at no extra cost in order to carry out all the required tests for the materials being used in the project.

Contractor should take all precautions to ensure that no damage is caused to the existing similar structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost. Contractor should carryout additional test required to test the suitability of materials before using the same to the work.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost. Contractor should execute the project with least impact to the environment.

When Structure constructed disputes arising on account of damages to the existing bunds, Structure and other private properties, if any, has to be resolved by the contractor. All precautions should be taken by the contractor so that there are no damages to such public /private properties.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

Contractor should follow strictly the prevailing rules of labour act.

The Bidder shall not furnish any fake/fabricated/false information or withhold facts etc., if the bidder is found to have violated any of these above (found either during evaluation or after awarding the tender), the tender shall be rejected and action as per rules and regulations shall be taken against the Bidder.

If the Successful Bidder has quoted lesser rates than the estimated rates then he should without fail remit the Unbalanced Tender Amount along with the Security Deposit within the stipulated time as that shall be specified in the Letter of Acceptance, failing which the tender of the Successful Bidder shall be rejected.

The bidders should submit the Bid capacity compulsorily. The details of balance work B value (works on hand & works for which tender submitted). Should be submitted in the prescribed format & should be signed by the concerned Executive Engineer / District level officer. In case the bidder does not furnish the above details/suppresses the actual facts/ produces false facts, along with the Technical bid, the technical bid of such bidder shall be considered for rejection.

With regard to tenders where lesser rates are quoted by the tenderer as per Standard Tender Document the contractor along with his financial bid shall furnish a detailed rate analysis for such of the items where has quoted lesser rates than the estimated rates. The rate analysis must indicated break up of rates for various components such as materials, labour, machinery and other relevant components. He shall also explain & substantiate how such lesser quoted rates would work out for him from the point of view of doing quality work. He shall also give undertaking that the rates quoted by me are workable to execute quality wok as per specifications and to the full satisfaction of the department Any failure on the part of the contractor in not submitting the above said information along with his financial bid in E-proc will be viewed seriously during evaluation of his financial bid.

The Defect liability period of the work is 24 Months from the date of submision of final bill.

Terms and condition of Contract as per Approved STD KW-4.

QAP & PERT chart should be submitted by the successful bidder within 3 Days From date of Agreement.

Design mix For Concrete shall be obtained from the approved NABL acredated laboratories and same shall be got approved from the department before incorporating in the work.

The intended bidders shall visit the site and quote his offer accordingly and for having visited the site, they should upload the Geo-tag Photos and Document for having visited the site duly certified by concerned Assistant Executive Engineer KREIS, while submitting the tenders.

The rates are Exclusive of GST. GST will be paid seperately.

Technical Criteria

Past Experience

3.2.b) Tenderer should Satisfactorily completed as prime contractor, atleast one Similar Work such as Building work of value not less than Rs 494.56 Lakhs. The workdone certificate duly signed not below the Rank of Executive Engineer.

Work Done Certificate

3.2.c) Tenderer should Executed in any one year, the following Minimum Quantities of work:(2020-21 to 2024-25). RCC-322.0 Cum, BBM/Laterite Stone/Soild Blocks/AAC Blocks-1334.0 Sqm, Painting-10076.0 Sqm, Steel-5.4 MT, Structutal Steel-8078.0 Kgs, Flooring-1783.0.0 Sqm, UPVC Windows-306.0 Sqm, SS Railing-1434.0 Kgs, Acoustical Wall Paneling-1238 Sqm, False Ceiling-961 Sqm, Medium/High Back Chairs-48 Nos, Auditorium Chairs-800 Nos, S.S.Chairs for Dining-544 Nos, S.S.Tables for Dining-200 Nos, Wooden Cot-20Nos, Conference Table-1 Nos, Room Tables-20 Nos, Ornamental Chair-1 Set. Tenderer Shall submit Workdone Certificate stating the above quantities executed issued by not below the rank of executive Engineer.

Work Done Certificate

Financial Status

3.2) Tenderer has to furnish Annual turnover for the last 5 years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 Duly certified by CA with UDIN.

Audited CA Certificate of Annual Turnover

3.2.a) Tenderer should Achieved in at least two financial years a Minimum Financial Turnover (in all classes of civil engineering construction works only) of Rs 2158.08 Lakhs. Duly certified by CA with UDIN.

Audited CA Certificate of Annual Turnover

3.3.b) The tenderer has to furnish liquid assets and /or availability of credit facilities of no less than Rs 269.76 Lakhs Credit lines/ letter of credit/ certificates from Nationalized/ Scheduled banks.

Line of Credit

Others

The Tenderer shall have valid Class-I KPWD/CPWD/MES/Railways/Public sectors license.

PWD Registration Certificate (Class I/II/III/IV)

The tenderer has to furnish Company Profile and details of Technical Personnel working/Associated with him the qualification and experience of individual are to be mentioned

Others -- RELAVANT DETAILS

3.2.d) The Tenderer or his identified sub-contractor should possess required valid Electrical License for executing building electrification works and should have executed similar electrical works totaling Rs 20.0 Lakhs in any one year during 2020-21 to 2024-25.

Others -- RELAVANT DETAILS

3.2.e) The Tenderer or his identified sub-contractor should possess valid license for executing Water supply/sanitary engineering works and should have executed similar water supply/sanitary engineering works totaling Rs 20.0 Lakhs in any one year during 2020-21 to 2024-25.

Others -- RELAVANT DETAILS

3.3.a) The tenderer shall produce Critical Machineries (50% to be owned & 50% to be hired with supporting documents). Trucks/Tipper/Dumpers-2 Nos, Excavators/Dozers -2 Nos, Mechanical Concrete Mixer with Hopper-2 No, Water Tanker of minimum Capacity 6000 Liters-2 Nos.

Others -- RELAVANT DETAILS

3.6) The Tenderer shall give details of the works on hand (Present contract commitment) duly signed by the bidder. (The Bidder should submit the work on hand i,e., B value with full details, if the Bidder furnish any false or incomplete details, the Bid will be rejected)

Others -- RELAVANT DETAILS

DELETED

Others -- DELETED

DELETED

Others -- DELETED

DELETED

Others -- DELETED

DELETED

Others -- DELETED

Fee & Financial Details

Tender Fee Amount

₹5,000

EMD Fee Amount

₹14.8 L

Important Dates

Last Activity

26 Dec 2025

Published

25 Nov 2025

Bid Opening

29 Dec 2025

Download Ends

9 Dec 2025

Pre-Bid Meeting

9 Dec 2025

BOQ Preview

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing & fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

•

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying add...

•

Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even ...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...

•

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

•

Providing and supplying 'Acoustical Wall Paneling' with square edges made of fibre glass substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire rea...

•

Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 (1 cement : 3 coarse sand) proportion cut to required shape, pattern with paper joi...

•

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 20mm with Exposed Grid for Hospitals, Shopping malls, Commercial establishments and office complex...

•

Dismantling wooden ballies in posts and struts including stacking to theappropriate disposal area as per direction of Engineer-in-charge ---- Including all lead and lift charges, loading and unloading...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...

•

Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...

•

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with...

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

•

Providing and laying water proofing treatment to the Retaining wall area with PU Elastomeric Single component liquid applied, cold applied, moisture cured high tensile elastomeric PU waterproofing mem...

•

Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boa...

•

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

•

Providing and fixing Mangalore tile roofing using first class tiles with necessary special tiles for ridges and hips, wood reepers and pointed with cement mortar 1:4 over the existing rafters includin...

•

Providing and fixing in position fully panelled Teak wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and pa...

•

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...

•

Cleaning of office floors, toilet floors, corridors, lobbies, partitions, storage units, furnitures,electrical & electronic equipments, doors, windows, curtains, blinds etc., including cleaning of dus...

•

DISMANTLING WORKS

•

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in ...

•

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking

•

to the appropriate disposal area as per direction of Eng...

•

Dismantling tile work in floors and roofs laid in cement mortar including stacking material to the appropriate disposal area as per direction of Engineer-in-charge. For thickness of tiles 10 mm to 25 ...

•

Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking to the appropriate disposal area as per direction of Engineer-in-charge. Thickness above 40 mm up to 75 mm...

•

Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials to the appropriate disposal area stacking serviceable and Unserviceable materia...

•

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks includ...

•

MODIFICATION OF EXISTING ROOMS

•

Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks as per IS 2185 (Part III) in super structure above plinth level up to floor I level with RCC band...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

•

Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawing a...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and laying cinder concrete in cement 1:15 ( 1 cement : 15 cinder of 12.5mm nominal gauge) on terraced roof or sunken slabs,laid to slope compacting, including cost of materials, labour, curi...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge. SS Handles 200mm ---- Including all lead and lift charges, loading and unloading c...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge. SS Aldrop 16mm dia, 200mm ---- Including all lead and lift charges, loading and un...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge. SS Tower Bolts 150x10mm ---- Including all lead and lift charges, loading and unlo...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge. SS hinges 125 mm ---- Including all lead and lift charges, loading and unloading c...

•

Providing and fixing Stainless Steel Fixtures conforming to 304

•

graded steel as per direction of engineer in charge. SS Door stopper 75mm ---- Including all lead and lift charges, loading and unloadi...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Construction of M40 Grade un-reinforced, dowel jointed,

•

plain cement concrete pavement over a prepared sub base in

•

recommended proportions, coarse and fine aggregate conforming to IS 383:2016, maximum...

•

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and remov...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...

•

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in require...

•

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

•

BALANCE COMPOUND WALL

•

Clearing and Grubbing Road Land.

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earli...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...

•

Providing 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand): Moulded Band including rounding off corners wherever required smooth rendering, providing and removing sc...

•

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with pa...

•

Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...

•

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

•

SEWAGE TREATMENT PLANT

•

Waste water Treatment by Bio Sewage Treatment Plant (Bio STP) onsite construction [25 KLD and 50 KLD ]:

•

Providing, installation and commissioning of anaerobic Bio Sewage Treatment Plant (Bio STP) for ...

•

EXTERNAL LANDSCAPE WORKS

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground without blasting for all works other than foundation in Ordinary/Soft rock & depth not exceeding 300mm as per dr...

•

Providing and laying 100mm thick factory made precast M -40 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Commercial Traffic Axle load repetitions more than 20MSA upto 50MSA &...

•

Procurement of quality lawn grass, Bermuda Grass, Turf ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and mach...

•

mixing Inputs as per prescribed proportion and quantity and spreading, applying fertilizers, digging, levelling, and dibbling with lawn grass at a spacing of 5cmx5cm & as per the direction of the Offi...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...

•

Providing and laying Vitrified tiles with thickness 9-10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all col...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of m...

•

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

•

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two coat applied @ 1.67 ltr/10 m² over and includingpriming coat of exterior primer applied @ 2.20 kg/10 m²) with pai...

•

EXTERNAL ELECTRIFICATION WORKS

•

Supply and erection of Double Pole TC structural set including all hardwares suitable for 100/300 kVA 4/5 Star Rated Transformer on RCC Pole - 9 Mtr Long, 145 Kg WL - GI ---- Including all lead and li...

•

Supplying and Fixing H - Frame Set for fixing 11 kV, 200 Amps Single Break GOS - (For DP structure for providing New GOS for sectionalisation) - GI ---- Including all lead and lift charges, loading an...

•

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - HT ST Support 50x8 mm Flat - GI ---- Including all lead and lift charges, loading a...

•

Supply and fixing of …….cross arm including all Hardwares complete as per the standard technical specification BESCOM - 11 kV, Horizontal Cross Arm - Galvanised Iron (GI) ---- Including all lead...

•

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, 200 Amps Single Break GOS ---- Including all lead and lift charges, loadi...

•

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification.of BESCOM - 11 kV, HG Fuse Unit with Solid Core Insulator ---- Including all lead and lift ...

•

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification of BESCOM. - 10 kV, 5 kA Lightning Arrester Polymeric type with GROUND DISCONNECTOR --...

•

Supplying and Fixing Strain Clamp, 3 Bolt type for 70/90 kN Disc Insulator including all Hardwares etc complete as per the standard technical specification of BESCOM ---- Including all lead and li...

•

Supplying and Fixing …..including all Hardwares etc complete as per the standard technical specification BESCOM - 11 kV, 5 kN Composite/Polymeric Pin Insulator (24 mm dia FRP Rod) ---- Including a...

•

Supply and erection of 9 Mtr RCC Pole including earth work etc,. complete as per the standard technical specification of BESCOM.. RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section ---- Inclu...

•

Supplying and Fixing ….. including all Hardwares etc complete as per the standard technical specification BESCOM - GUY Set ---- Including all lead and lift charges, loading and unloading cha...

•

Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non-corrosive, thermally conductive, potential to permissible limits,superior F...

•

Supplying and fixing of class B GI pipe on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class - 100 mm ---- Including all lead and lift charges, loading and un...

•

Supplying and fixing of 11 kV, DOLO Cutout REC Specification(Dwg No. BESCOM/GM/QS&S/20 Dtd 24.11.2018) on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV class --...

•

Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOO...

•

Supplying and making 11KV (E) Extruded "X" linked for tubing & moulded & cross-linked components using Heat Shrink Stress Control tube having High Permittivity XLPE Terminations- INDOOR & OUTDOO...

•

HT Cable - Supplying and laying of high tension 11KV cable, Dry Curing & Dry Cooling with true triple extrusion, simultaneously through a single common head, 3 core under ground XLPE (E) cable...

•

Supply,erection, testing and commissioning of Distribution Transformer - 3 Phase, 11kV/433V - Stacked CRGO Core with Oil as per IS-1180 (Part-1): 2014 tap switch Butchholtz relay winding Temperature i...

•

Providing and fixing G.I. chain link fabric fencing of required width in

•

mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

•

Providing and fixing M.S.Block pipe of 38mm dia, of heavy guage of 14 including removing the bends, cutting the pipe and fixing pipe in between the existing two verticle poles (M.S rectangular poles) ...

•

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complet...

•

Supplying and installing of CO2 -4-5 Kgs capacity Fire Extinguishers ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of al...

•

Supplying of four bucket stand alongwith buckets. Complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and ...

•

Supplying of Rubber HAND GLOVES ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipment...

•

Supplying of FIRST AID CHART with lamination. Complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and mach...

•

11 KV Hickery rod set ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for...

•

Grounding sticks extendable upto 18 ft : 3 nos. of each 6 ft Sticks of 3 phase R, Y, B (3 nos. of 1 set) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all in...

•

Supplying of first aid box. complete ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipmen...

•

Supplying and fixing of DANGER / CAUTION board ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery a...

•

Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Including all lead and l...

•

Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...

•

Providing Spiral Earth Electrode type earthing (without

•

charcoal, salt etc.,) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire cha...

•

Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI Strip 50 x 6 ---- Including all lead and lift charges, loading and unloading charg...

•

LT Distribution Box for 100 kVA DTC with MCCB's (Sheet Metal) (Dwg No. BESCOM/GM/QS&S/58 Dtd 24.11.2018) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all in...

•

LT Feeder Pillar - 12 Way with Poreclain Rewireable Cutout and & 1 No of 630 Amps Load Break Switch with Copper Busbar asper IS-13947 Part-1&2(Dwg No. BESCOM/GM/QS&S/41 Dtd 24.11.2018) ---- Including ...

•

Heat Shrinkable Straight Through Jointing Kit for XLPE Cable with Copper Lug & Al Ferrule - 3x95 Sqmm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incid...

•

Supply, Installation, Testing and Commissioning of ongrid Solar Photovoltaic PowerPlant conforming to MNRE specifications as amended, consisting of Mono/PolyCrystalline silicon solarcells, netmetering...

•

CT PT Operated ETV Meter 0.2s Accuracy Class with ABT feature and DLMS protocal with ToD with RS 232 Port BIDIRECTIONAL (Used for Boundary Metering) ---- Including all lead and lift charges, loading a...

•

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975

•

Heavy Duty Copper Terminal Long Barrel - 16Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire ...

•

Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired. ---- ...

•

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

•

Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equippe...

•

Facilitation Charges ,Registration Fee and Charges for Documentation of Power Purchase Agreement ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental...

•

HT meter Testing Fee ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for ...

•

LT meter Testing Fee ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for ...

•

MODULAR KITCHEN

•

SS STORAGE RACK

•

Unit to be provided with four (5) shelves, starting at 150 mm and then at equidistant, constructed with 38 mm dia SS pipe of 16 SWG 304) Fiffed with 25 x 100 x 25mm hat channels, fram...

•

The unit should be made of SS Square pipe structure of size 30 x 30 mm x 16 swg SS 304 with Nylon adjustable bullet feet and supporting cross bars at every 150 mm space. ---- Including a...

•

INSECTOCUTORS SPIDER/ PCI ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required...

•

VESSAL STORAGE RACK

•

Unit to be provided with four (5) shelves, starting at 150 mm and then at equidistant, constructed with 38 mm dia SS pipe of 16 SWG 304) Fiffed with 25 x 100 x 25mm hat channels, ...

•

POTATO/ ONION/COCONUT BINS

•

Unit of 38x38x6 mmSS angle with 14 G SS mesh constuction,SS bin cover with handle and a sliding door at the bottom front for the stored item to be taken out,Vertical SS tubu...

•

PRE WASH SINK (SINGLE SINK)

•

Constructed of 16 SWG (304) SS top, double beaded on all sides and secured to 38X38X3 mm SS angle welded framework. Sink size 450X450X350 deep integral with top sheet - che...

•

GARBAGE BIN WITH TROLLEY ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required ...

•

Hoods made out of 18g SS304 sheet and SS angle frame work of standard design to exhaust fumes over cooking areas, ceiling mounted. ---- Including all lead and lift charges, loading and unl...

•

TILTING WET GRINDER

•

Capacity 10 ltrs. Tilting model with complete SS construction including the lid and the casing.1HP/220V/1Ph ---- Including all lead and lift charges, loading and unloading charges...

•

SS POTATO PEELER

•

SS BODY-3phase/Made of fully SS construction. Capacity - 20 kg, peeling time - 80 sec. Electrical - 2HP/440V/3Ph ---- Including all lead and lift charges, loading and unloading charg...

•

COCOCUNT SCRAPER

•

SS Body with SS Stand-1/2 Hp Motor 1phase Coconut Scrapper with Stainless Steel Construction, SS Knife and SS Splash Guard, SS Stand operated ---- Including all lead and lift charges...

•

GRINDER CONVENTIONAL -SS Body SS Bowl-7.5 Ltrs 1.5HP/440V/3Ph ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men a...

•

MIXER DynaMix-3 Speeds, 230 V,Speed 22000rpm,3 Jar ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machiner...

•

Removable S.S Grating of 304 0f suitable SS angle frame 32x32 with 25 mm height / Grating with hairline finishing / Grating with 5mm thick for outside ring, 3mmthick for interior section...

•

TWO BURNER COOKING RANGE

•

SS 304 Top 16 SWG,50X50X6mm SS angular frame work full welded,3 Nos 16"x16' Heavy duty cast iron vessel rest, G-9 Burner and T-35 with NCV,copper pigtail,SWG 20 (304) SS 3 s...

•

SINGLE BURNER COOKING RANGE

•

SS 304 Top 16 SWG,50X50X6mm SS angular frame work full welded,3 Nos 16"x16' Heavy duty cast iron vessel rest, G-12 Burner with NCV,copper pigtail,SWG 20 (304) SS 3 sides c...

•

BULK FRYER-SS 304 Top 16 SWG,50X50X6mm SS angular frame work full welded,SS bowel G-12 Burner with NCV,copper pigtail,SWG 20 (304) SS 3 sides covered with air vents .Manifold - 0.5 inch dia provided ...

•

all SS 304 Grade only,Top 14 Gauge, SS angle frame 38x38x3 mm under construction,Containers should of SS 304, removable of size 1/2 GN Pan 200 deep 9 Nos with individual lids. 18G Unde...

•

304 Grade Top16 Gauge Sunk in,SS angle frame 38x38x3 mm bottom support of sink,16g Size:450x450x300 deep radius cornere,with 38mm dia drain coupling. Cold water faucet deck mounted,,Verti...

•

CHAPPATI PLATE STOVE

•

16g SS top reinforced with 6mm thick SS angle frame, oil drain pipe,20 mm polished M.S Plate with 2 Nos RV 1200mm Burner 20g SS covering on 3 sides with front side control pane...

•

16g SS top reinforced with 6mm thick SS angle frame, oil drain pipe,20 mm polished M.S Plate with 2 Nos RV 1200mm Burner 20g SS covering on 3 sides with front side control panel, 150mm rear sp...

•

SPIRAL MIXER (Atta Mix)

•

Bowl Capacity (L) 28,Voltage (v) 380-415,Frequency (Hz) 50,Input Power 1300/1700,Mixing Speed 230/150,Bowl Speed 20/13,Mix Hour Capacity (kg): 20,Mix Dough Capacity 50% water. ...

•

SS EXHAUST HOOD WITH SS FILTER-BURNER AREA-SSS ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery an...

•

4 DOOR VERTICAL REFRIGERATOR UNIT

•

Temp range +2 to +8 degree, 20g SS outer body construction, 20g SS tank with 60mm PUF Insulated, 18g SS door double beeded on allsides with PUF insulation, ON/OFF sw...

•

2 DOOR DEEP FREZZER ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for s...

•

HOT BAIN MARIE COUNTER(FOOD COUNTER)

•

all SS 304 Grade only,16g top,185g water chamber with under shelf and Front control panel, SS angle frame 38x38x6 mm under construction, fitted with 2kw 2 Nos wat...

•

KITCHEN FUME EXHAUST BLOWER 7.5 1440 RPM Speed,To Ensure Low Sound And Max Volume Of Exhaust CGM ON 415V,3phase, 50Hz electric supply.(Motor-ABB/Cromption ---- Including all lead and lift charges, loa...

•

FRESH AIR BLOWER-5HP OF 1440960 RPM Speed,To Ensure Low Sound And Max Volume Of Exhaust CGM ON 415V,3phase, 50Hz electric supply.(Motor-ABB/Cromption ---- Including all lead and lift charges, loading ...

•

FRESH AIR 20 MICRON LOUVERS ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments requir...

•

G.I DUCTING Jindal ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments required for su...

•

LPG SYSTEM WITH GAS DECTECTOR (GAS ALARM) ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and eq...

•

STAGE FURNITURES, DINING HALL FURNITURES

•

High Profile Chair (Ornamental) - Supplying of Rose wood maharaja Chairs of Karnataka State Arts & Crafts emperium Model or equivalent, Includes ornamental curved legs, handles, design head rests, sil...

•

Stage Chairs (Arm Rest)

•

Supplying Medium Back chairs with multi lock gas lift elc., of Contact Project HB of featherlite or equivalent make, including the cost of all materials, labour and transportat...

•

Sofas for Front Row (3 Seater)

•

Supplying and fixing in posion designer THREE SEATER

•

leather sofa of standard size of Durian or equivalent make, etc.,

•

compete. The Work includes cost of all materials, ...

•

Auditorium Chairs - M.s fabricated & powder coated legs. M.s pressed spring mechanism & powder coated (seat: half tip-up & back: pushback mechanism). 18mm plywood on both seat & back. Pu foam (polyure...

•

Carpets (for Centre and Side paths)

•

Supplying of Carpets - 10005 Red (6'6""*2) including cost of all materials, labour charges with all lead and lift, loading and unloading, transportation and all oth...

•

Stainless Steel Dining Chairs

•

---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments req...

•

Stainless Steel Dining Table

•

---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipments requ...

•

Doble Size Cot - Queen Size - Wooden

•

---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hire charges of all men and machinery and equipme...

•

Bedsheet + Pillow Covers

•

Supplying of good quality Bed sheet sets double size 245X270 cms printed flower design supper fine quality bed sheet one double sheet and 2 number of pillows covers per set in...

•

Almera With Mirror

•

Supplying of Metal Godrej Almirah size 3'0""x6'4""x1'9"", including cost of all materials, labour charges with all lead and lift, loading and unloading, transportation and all other...

•

Providing and fixing High back Wooden Frame Revolving Chair: with wooden seat, ""S"" type wooden strips of size 50x25mm for frame with 8 vertical support for back rest & teak wood Handl...

•

Boardroom Table

•

Supplying and fixing Conference table of size 4800X1200x750mm using 19mm block board frame at top and bottom support and 4mm thick veneer with edge bonded End table complete as per spe...

•

Supplying High Back chairs with multi lock gas lift elc., of Contact Project HB of featherlite or equivalent make, including the cost of all materials, labour and transportation lead lift etc.,...

•

Supply and fixing of machine tufted solid cut pile carpet made out of 100% Pet Polyster(clear touch ployster R2x). The carpet it should be 100% plece dyed with a futfed weight of 53.6 ounce gauge of t...

•

Providing stitching curtains of approved quality curtains cloth of standard size and make stiching with lining cloth, work including cost of all material, labour, charges transportation and all other ...

•

Providing and fixing curtains rods of size 25mm dia. Stainless steel of heavy gauge pipe with stainless steel end brackets and stainless steel-supporting double brackets and L brackets wherever necess...

•

WATER SUPPLY & ELECTRICAL WORKS

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, thi...

•

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe ...

•

Supply and delivery at site GM (copper alloy) gate valves confirming to Class-I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed ...

•

Providing GM (copper alloy) reflex valves/ globe valves confirming to Class-I and as per IS 778/1990 with latest amendments, 1 No. and with ISI mark screwed female ends confirming to IS 554/ 1990 hori...

•

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

•

Providing and placing on terrace (at all floor levels), polyethylene water storage tanks IS:12701 marked, with manhole lid and suitable locking arrangements, making holes of suitable diameter for inl...

•

Providing and fixing Jaguar Long body bib cock with wall Flange (Catalogue No.CON-107KN Including Cost of labor, loading and unloading, lead and lift charges hiring of machinaries. the rates Includin...

•

Providing and fixing unplasticised PVC connection pipe with brass unions : 45 cm length, 20 mm nominal bore ---- Including all lead and lift charges, loading and unloading charges, labour charges, all...

•

Supplying and fixing European Closet Cat No.VGS-WHT-0312/316 size 810mmx 405mm x730-P180/S-250 Jaguar/Equivalent make as approved Including cost and conveyance of all materials, all lead and lift, loa...

•

Providing and fixing Jaguar Hand shower (health faucet) with 1m long easy flex tube in Chrome finish and wall hook (Catalogue No.ALD-565) the rates Including cost of labour, loading and transportation...

•

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders wi...

•

Supplying and fixing Wash Basin FLS WHTIVY-0605 Wash basin with full pedestals size 835mmx560mmx140mm Jaguar or Equivalent make as approved including. cost and conveyance of all materials, all lead an...

•

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complet...

•

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with ...

•

Providing and fixing PVC (S.W.R) P Trap 10cms x 10cms with all fitting

•

arrangements & all necessary accessories complete ---- Including all lead and lift charges, loading and unloading charges, labour...

•

Providing and fixing PVC (S.W.R) Nahani Trap 10cms x 10cms with all

•

fitting arrangements & all necessary accessories complete ---- Including all lead and lift charges, loading and unloading charges, l...

•

Providing and fixing PTMT grating of approved quality and colour 125 mm nominal dia ---- Including all lead and lift charges, loading and unloading charges, labour charges, all incidental charges, hir...

•

Providing and constructing "WIRE CUT BRICK MACHINEHOLE

•

CHAMBERS" using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved q...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uP...

•

Providing and fixing on wall face unplasticized Rigid PVC Rain water pipes confirming to IS : 13592 Type A Including jointing with seal ring confirming to IS : 5382, Leaving 10mm gap for Thermal expan...

•

provding and fixing 2HP monoblock Motor with all accessories.. For single phase…Make : ATALATA / SUGUNA / CRI/ KIRILOSAKAR ---- Including all lead and lift charges, loading and unloading charges, la...

•

Concealed Conduit System Supplying 19/20 mm dia 2mm/2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, metal/PVC junction boxes adhesive paste etc., and running before co...

•

Open Conduit System Supplying heavy gauge PVC conduit pipe 19/20mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm (Phase & Neutral) & 1x1.0 mm 2 (Earth wire) FRLS multi strand PVC insulated copper wire ...

•

Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ...

•

Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ...

•

Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ...

•

Supplying and fixing surface/flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in ...

•