MLA FUND-2024-2025 CONSTRUCTION OF NEW ANGANVADI BUILDING AT 10TH WARD RATION SHOP NEAR IN AYAKUDI TOWN PANCHAYAT

Amount

CONSTRUCTION OF NEW ANGANVADI BUILDING

Earthwork excavation and depositing on bank with initial lead and lift in hard gravelly soil for foundation etc. complete.

Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyance of all materials to site and labour charges etc. complete.

Filling in Foundation and Basement with conveyed gravel in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Supplying and Filling the foundation and basement with filling sand in layers not more than 15cm . Thick well rammed, watered and compacted Complete complying with standard specification.

Brick work in Cement 1:5 mix using country Bricks of size 83/4"x 41/4"x23/4" including cost of all materials mixing mortar and all other labour charges etc. complete.

Supplying and erecting shuttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations

Supplying, fabricating and placing in position mild steel or ribbed to steel and all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc. complete.

RCC 1:1.5:3 Mix using 20mm HBG metal including cost and conveyance of all materials and labour charges etc. complete

E) Paving the floor with descrgned coloured vitrified tiles of size 600 x 600 x 8mm of best quality and approved variety complying / confirming ISI specification land over cement mortar 1:3 (one cement and three sand) 20mm thick and pomted with same coloured cement neatly etc., complete.

Dadooing walls with Glazed tiles of size 150x 150x 6mm laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complete

Plain Cement Concrete 1:2:4 Mix (one part cement, two part M.sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Plastering with CM 1:3 mix 10mm thick including cost and conveyance of all materials to site and labour charges etc. complete.

Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete.

Supplying & Fixing of Cuddapa Slab using 50 mm Thick including all charges etc.

Supplying & Fixing in position of Indian type Baby Water closet including cost and conveyace of all materials to site etc. complete.

Supplying and Fabrication of Steel Door using ms Angle and ms flat and ms sheet including all charges etc.

Supplying and fixing of Terracotta Jolly including all charges etc.

Supplying and fixing of Rain Water Pipe 110 mm Dia 4ksc pvc pipe including all labour charges etc.

Supplying & Fixing of AC Vent Pipe 100mm dia for septic Tank including cost and conveyance of all materials to site and all labour charges etc. complete.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting two coats for Black Board including all charges etc. complete

Painting two coats over new iron work using synthetic enamel paint including cost and conveyace of all materials to site etc. complete.

Weathering course in Brick jelly and lime concrete using broken brick jelly of size 20 mm uniform gauge in pure slacked lime ( no sand to be used ) the proportion of brick jelly to lime being 32:12.5 by volume laid over the RCC roof slab in a single layer of required design , slope and finished thickness by beating the concrete with wooden and beaters of approved pattern keeping the surface constantly wet by springing lime Jaggery water etc,. complete as per standard specification and as directed by the Engineer incharge

Finishing the top of Roof with one course of machine pressed tiles of size ( 23x23x2 cm ) approved quality in C.M. 1:3 - 10 mm thick mixed with water proofing compoud confirming to IS @ 2 % by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc,. complete complying with Standard Specification.

Supply and Fixing Exhaust Fan including all charges etc.

Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm withsupporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. (SD No.127)

Supply and run of 2 of 6 sq. mm ( 84/0.30) polythene insulated and PVC unsheathed S.C. Alu cable of 1100 V on 7/20 Gi bearer wire for Service Connection Main - SD.66

Supply and run of 2 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains SD71

Wiring with 2 x 1.5 Sq.mm PVC unheated SC allocable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with T.W. Switch box in flush with wall, covered with nylon sheet of 3mm thick with painting of suitable color for open P LIGHT POINT SD No22

Wiring with 2 x1.5 Sq.mm PVC unheated SC allocable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm T.W. switch box in flush with wall, covered with nylon sheet of 3mm thick 5 Amps 3 pin non - inter PLUG POINT SD 10

Supply and fixing of 1000 Litre Capacity HDPE Tank as per ISI Specification

T Duraisamy (BID ID -1125263)