SPL REPAIRS TO BLDG NO P-11 (GROUND FLOOR AND FIRST FLOOR) OF COMPOSITE FOOD LABORATORY ARMY SERVICE CORPS AND DIRECTORATE GENERAL OF SUPPLIES AND TRANSPORT QMG BRANCH (ST/7/8) DELHI UNDER GE (NORTH), DELHI CANTT-10

Amount

M&L Taking down cement plaster of any description including tiles etc from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 10mm thick in cement mortar 1:6,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4:7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water,and rendering 15 mm th in cm (1:4) in two layers (10mm+5mm ) mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4: 7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and fair complete all as specified and directed. Note- PD proof 101 LW(+) and super latex 302 shell be measured and paid seperatly

M&L Taking down cement plaster of any description from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water and rendering 15 mm th in cm (1:4) finished the surface even and fair without using extra cement complete all as specified

M&L Taking down cement plaster of any description including tiles etc from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water , rendering 10mm thick in cement mortar 1:6, finished the surface even and fair complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks old size bricks strainght or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M&L for 1/2 brick work with sub class 'B' bricks , using old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.

Dismantling and removing of old roof treatment of any any descreption ,cleaning the surface with water etc complete to receive plaster/PCC and removing the debries out of MOD land complete all as specified and directed

M&L for preparation/roughning of the plastered/unplastered roof surfaces incl removal of grass, small trees and laying of APP polymeric water proofing membarance of minimum 3mm thickness & weighing not less than 3.6 kg/sqm of Make : M/S STP Ltd or HYPER PLAS (Poleyster) manufactured by M/S IWL ltd or SHALIPLAS (Poleyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd or as approved by GE, black finished reinforced with non-woven poleyster matt with thermofusible finish laid over compatible bitumen, 85/25 Gde, @1.2Kg/Sqm over bitumenous primer at the rate of 0.40 kg/sqm, torching overlaps with a propane or a butane gas torch with a overlap of 100 mm at the sides and 150 mm at the ends and sealing applying a consistent coat of bituminous alluminium paint over APP surface all as per manufacturers instructions over and including screed bedding 15mm thick on brick/roof surfaces in cement mortar 1:4, mixed with water proofing compound as per manufactrurs instruction incl removal of existing roof treatment complete all as directed and specified

M & L PCC type B0 1:2:4 using 12.5mm graded stone aggregates as inroof kerbs , pcc padding or other simmiler work complete all as specified and directed.

M&L for coloured digital vitrified tiles 8-10 mm thick in floor not exc 0.36sqm each tile area set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including screed bedding 15mm in CM 1:6 complete including dismantling of floor, hearth or wall tiling with cement mortar bedding, backing and dispose rubbish out off the premises complete in all respect all as specified and directed.

All as per item Srl No 11, but on vertical surface as in dados/skirting over 10 mm thick screeding in CM 1:4 complete all as specified and directed

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick, (square/rectangular), area of each tile exceeding 0.11 sqm but nexc 0.18 sqm, in floors etc. set & jointed, Joints are filled with , Fevimate TG tile grout of Dr Fixit to match over 15mm thick screed bed or bedding layer of mortar in cement mortar (1:6) for laying floor finish,complete all as specified and directed.

M&L for Glazed ceramic coloured digital wall tiles area exc 0.06Sqm and not exc 0.18Sqm X7-8mm thick set and jointed with neat cement slurry , Joints are filled with , Fevimate TG tile grout of Dr Fixit over and including 10mm thick rendering in CM 1:4 ,mixed with PD proof 101 LW(+) of Dr fixit or equvalant integral WP admixer @200 ml/bag of cement over two coats of super latex 302 of Dr fixit or equ. in the ratio 1:4:7 (one part super latex 302, 4 part water and 7 part cement ) @ 1.50 Kg of homogenious mixture per Sqm in two coats and finished the surface even and faircomplete including dismantling floor, hearth or wall tiling incluidng cement mortar bedding but not backing and disposal rubbish out off the premises complete in all respect all as specified and directed. Note- PD proof 101 LW(+) ,super latex 302 and tile grout shell be measured and paid seperatly

Supply only tile sealing compound, Fevimate TG tile grout, complete all as specified and directed

Supply only PD proof 101 LW (+) of Dr Fixit or equ, complete all as specified and directed

Supply only super latex 302 of Dr fixit or equ, complete all as specified and directed

M&L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces as on ceiling and finished fair and even incl Taking down cement plaster of any description including tiles etc from brick, stone walls or concrete surfaces including raking out joints, hacking for key,scrubbing down with water complete all as specified and directed.

M& L chipping of spoiled and loose ceiling plaster/concrete and cleaning rust from reinforcement, scrubbing down concrete surface with wire brushed and cleaning with water and allowed to dry and applying a layer of SBR (latex) as primer on exposed surface and fixing of steel welded mesh by welding/tightened with the existing reinforcement and rendering 25 mm thick CM in 1:3 mix with SBR (latex) as per manufacturer instruction in two layers complete all as specified and directed (welded mesh will be paid separetely)

Supply only Welded steel wire fabric of weight per square metre n exc 4Kg. Complete all as specified and directed.

M&L for applying two coats of oil imulsion distemper over a coat of primmer over 3 mm th wall care putty (Birla white or equivalent) in two or more coats on newly plastered wall surfaces all as specified and directed..

M&L scrapping out existing treatment by mechanical means and applying two coats of oil imulsion distemper over a coat of primmer over 3 mm th wall care putty (Birla white or equivalent) in two or more coats on old plastered wall surfaces all as specified and directed

M&L preparation of new plastered or unplastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed

M&L for preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash as in ceiling complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of ceiling and applying one coat of white wash as in ceiling complete all as specified and directed

M/L for preparation of newly plastered surfaces of any description and applying two coats of cement base paint over a coat of cement base primer complete all as specified and directed

M/L for preparation of old plastered surfaces of any description and applying two coats of cement base paint all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors, window ceills, concrete railings, opening in concrete walls, floor & roofs in exc 20 cm wide & sides of RCC/PCC bands in walls, horizontal or sloping & similar work exc 10cm but n exc 20 cm wide Roughed finished surface of concrete

Dismantling of PCC of any description & in any description & in any position not otherwise specifically provided

M&L Granite stone slab 18 to 20 mm thick machine cut polished, bedded and jointed in neat cement slurry and pointed in white cement with pigment to match colour of granite stone with and including screed bed of 20mm thick in cement mortar 1:6 all as directed and specified

Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for including cutting of reinforcement as required to facilliate demolition complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type A1 1:1½:3 (20mm graded crushed stone aggregate) as in Chajjas slab and the like complete all as specified and directed.

Use & Waste of formwork to Chajjas, slab ,chullah hoods, troughs and similar items including edges rough finished surfaces complete all as specified and directed

S&F of TMT bars 10 mm dia and over, cut to length , bent to shape required , including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Dismantling wall panelling or similar items including shutter, insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

M & L for Solid PVC wall lining consisting of 5mm thick colour PVC sheet incl of solvent cement and fixing at site on PVC frame as per specification, complete all as specified and directed..

M and L for 5mm thick PVC sheet fillet width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification, complete all as specified and directed..

Taking down chowkhats or frames with shutters n.exc 1.5 sqm each(without taking off shutters from the frame) and complete all as specified and directed.

All as per item srl No 38, but exc 1.5 sqm but n.exc 4sqm each, complete all as specified and directed.

Taking down shutters exc 1sqm but not exc 2 sqm each and removing from site complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section complete all as specified and directed.

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F 2nd class softwood 35mm thick Glazed & skeleton shutters, open rebated & prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut & mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); to chowkats, complete all as specified and directed.

M&L for Factory made PVC Door Frame (Single Rebate) made out of sigle piece extruded solid PVC foam profile with homogenous fine structure having smooth outer integral skin having 62mm width & 32mm thickness of Density 600kg/Cbm manufactured by an ISO-9001-2015 certified company, frame will be mitred & jointed with self driven self tapping screws of size 50mm x 8mm solvent cement or fusion Heat Welding Process all as per manufacturer's specifications and direction of Engineer-in-charge.

M & L 30 MM thick FACTORY MADE SOLID PANEL PVC DOOR SHUTTER" consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 X 19mm for styles and 15 X 15mm for the top and bottom rails, M.S frame shall have a coat of metal primer of approved make and manufacture . M.S.frame shall be covered with heat moulded PVC ‘C’ channel made from 5mm (±0.25) thick sheet of Density 600 Kg /Cbm manufactured by an ISO- 9001-2015 certified company, of size 30mm thickness, 50mm width to form styles and 5mm (±0.25) thick and 75 mm wide PVC sheet for the top rail, lock rail and bottom rail on either side of the panel . An additional 5mm (±0.25) thick PVC strip of 20mm width is to be stuck on the bottom side of the 'c' channel . Panelling of 5mm (±0.25) thick PVC sheet to be fitted inside the M.S frame welded/sealed to the styles and rails with 5mm (±0.25) x 30mm PVC sheet beading on either side and joined togther with solvent cement adhesive etc., 10mm thick ( 5mm (±0.25) x 2nos.) , 20mm wide cross PVC sheet as gap insert for the top rail & bottom rail. Door to be fixed to frames with 3 nos. M.S powder coated butt hinges of size 100mm*25MM*2mm using 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws, Complete as per direction of Engineer-in-Charge.

S&F 100 mm size butt hinges, medium weight , cold rolled, stainless steel and fixed complete all as specified and directed

S&F aluminium anodised barrel tower bolt 200mm long extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium handles fabricated type anodised complete all as specified and directed.

S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting incl Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

S&F of 20m bore tubes medium grade galvanised with and incl all GI fitting incl Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.

M&L for cutting chases, pinning in. making good to facings where required specified and directed.

S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white incl seat cover (excluding fixing bolts, flushing cistern & flush pipe), complete all as specified and directed.

S& F in repair vitreous china wash hand basins white colour with fixing accessories set including cp coupling 32mm dia, waste pipe (under / over counter), size: 555 x 425 x 195mm, shape: Oval, all as specified and directed.

S&F in repairs vitreous china urinal half stall type white including waste pipe , CP spreader complete all as specified and directed.

S & F in repair Angular Stop cock with wall flange 15 mm bore (Make jaquar KUP-35053PM) complete all as specified and directed.

S&F in repair 15 mm bore PVC connection 450 mm long with two brass chromium plated brass nuts and PVC washers complete all as specified and directed.

S & F in repair CP bib tap with wall flange 15 mm bore (Make jaquar KUP-35037PM) complete all as specified and directed.

Dismantling of 75 mm /100mm cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, complete all as specified and directed.

S&F 100mm dia spun cast iron soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors or fixed on wall, complete all as specified and directed.

S&F 75mm dia spun pipe soil waste and vent pipes in any length with or without ears, with cement joints laid in trenches or in floors or fixed on wall, complete all as specified and directed.

S&F 100 mm dia spun cast iron long bends(any radius) diminishing pieces or tapers(;larger bore measured), complete all as specified and directed.

S&F 100 mm dia spun cast iron Branch pieces or tapers(;larger bore measured), complete all as specified and directed.

S&F 75 mm dia spun cast iron long bends(any radius) diminishing pieces or tapers(;larger bore measured), complete all as specified and directed.

S&F 75 mm dia spun cast iron Branch pieces or tapers(;larger bore measured), complete all as specified and directed.

S&F in repair 110 mm bore PVC rain water pipe single socketed in any length with rubber ring fixed to wall with clamp incl taking down old existing pipe complete all as specified.

S&F in repair 100mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof, complete all as specified and directed.

S&F in repair 75mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp incl bolts and nuts and securing ends of clamp to wall or roof, complete all as specified and directed.

S&F 75 mm dia cast iron floor trap with long bends including fixiing to waste pipe with lead, complete all as specified and directed.

S & F aluminum powder coated two track window with frame, glazed with 4 mm thick tinted glass including rubber bead joining cleat for fixing in position, concealed type lock for all two shutter, PVC roller including 25 X3 mm aluminum flat all round at outer fase of window frame for fixing of wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm on outer frame one side complete etc all as specified below :-- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50

S & F aluminum powder coated three track window (two shutters glazed & one shutters wire gauge) with frame, glazed with 4 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing in position, concealed type lock for all three shutter, PVC roller etc all as specified below :- (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.50 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 21455) (d) Interlock Section of Shutter shall be be of size 18.00 x 40.00 x 1.50 (Section No 21454) (e) Bottom Members of shutter Section shall be be of size 18.00 x 40.00 x 1.50 (Section No 20844).

S&F anodized aluminum alloy powder coated standard hollow section for door, including aluminum frame / chowkhat with following specification including 12mm prelaminated particle board interior grade both side laminated / 12mm thick, PVC hollow sheet, or 05 thick tinted glass, anodized aluminum snap beading, glazing clips, joining cleats, rubber gasket screws, 2Nos aluminum anodized handles 250 mm size , 4 Numbers aluminum hinges, 1 number 125 mm long door stopper and 1 number 250 mm long aluminum sliding door bolt in each door etc complete all as specified and directed. (a) Door frame of the section: - 101.60mm x 44.45mm x 2mm with necessary holdfasts/ fasteners and connected accessories (b) Bottom, middle / and top rail of section: - 100mm x 44.45mm x 2 mm. (c) Stiles of section :- 85mm x 44.45mm x2mm

S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed..

S&F powder coated aluminium grill any size and pattern fixed to aluminium windows with screws complete all as specified and directed

M & L rendering 15mm thick in CM (1:4) finished the surface of jambs and cill even and fair without using extra cement complete all as specified and directed.

Supply & Fix in repair rotational moulded polythene water storage tanks, tripple-layered,colour-white 1000 Ltr capacity, cylindrical, vertical with closed top, complete all as specified and directed.

Supply & Fix in repair rotational moulded polythene water storage tanks, tripple-layered,colour-white 2000 Ltr capacity, cylindrical, vertical with closed top,complete all as specified and directed.

Impregnating cream for injection info masony or concrete wall 230 mm thick against capilary rising humidity raising bar super strong (productd no 201) of chowgagle bldg camical or equlient. Pedlite /Sika/phosrock complete all as specified and directed.

S&F in repairs White Vitreous china laboratory sink size 600x450x200 with plugs, washers & wastes; including bedding in CM on to dwarf walls, or including fixing cantilever brackets & connecting union to waste pipe, complete all as specified and directed..

M&L vertical venetian blinds of any colour or size as approved by Engr-in-Charge including all accessories fixed to wall complete all as specified and directed.

S&F in repair Fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw & washer in roof, wall etc. of 2mm thick, complete all as specified and directed..

S& F 600x600 Non asbestos fibre cement building board 4mm thick laid/inserted to aluminium frame (i) angle of size 25x25x3mm for corner fixed with fastener and tee 25x25x3mm for frame false ceiling 605 x 605mm hanging with suitable GI hanger complete all as specified including Demolition of old ceiling or panelling complete all as specified and directed.

S & F in repair 15mm dia CP sink mixer for mixing hot and cold water with regular spout without popup waste system, complete all as specified and directed.

M & L PCC type B1 1:2:4 as in PCC block complete all as specified and directed.

M & L Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded n exc 6mm, complete all as specified and directed.

Resecuring or easing & adjusting, without taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each, complete all as specified and directed.

S&F in repairs, Pillar taps, cast copper alloy with capstan heads,chromium plated screwed down, high pressure with or without lettered hot or cold with long screwed sank and fly nuts, screwed for iron pipe of 15 mm bore complete all as specified and directed.

S&F in repair 20 mm dia Ball valve high pressure of PTMT with epoxy quoted aluminium rod and plastic ball scrood for iron pipe, complete all as specified and directed.

M&L prep of new wooden surfaces and applying two coat of synthetic enamel paints over a coat of primer, complete all as specified and directed.

M&L prep of new steel surfaces and applying two coat of synthetic enamel paints over a coat of primer, complete all as specified and directed.

M&L prep of old steel surfaces and applying one coat of synthetic enamel paints, complete all as specified and directed.

M&L prep of old wooden surfaces and applying one coat of synthetic enamel paints, complete all as specified and directed.

S&F stop valve caste copper allowid scrood down high pressure with crutch or butterfly handle 20 mm dia, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality glizing with oil putty in square n.exc. .5sqm each pane, complete all as specified and directed.

S&F 250mm long aluminium alloy anodised sliding door bolt with hasp staple and fixing ciips upsheet and fixing bolt and sliding bolt up extruded section fixed and repair, complete all as specified and directed.

S&F in repair 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S & F in repair 100mm long aluminium handle caste type anodised complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, buzzer, socket or power & AC Points) complete, including fixture and fitting such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials to store for keeping safe custody or for taking credit and making good disturbed surfaces of walls, floors etc as per existing complete all as specified and directed.

M&L for point wiring concealed type with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates, blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :-

(a) One light point controlled by one one way switch

(b) One fan/ exhaust fan point controlled by one one way switch

(c) One buzzer point controlled by one one way switch

(d) One 5 Amps 3/5 pin socket outlet on same board with other switches.

(e) One 5 Amps 3/6 pin socket outlet on independent board

All as per serial item No 100 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable as continuous earth wire (colour green), complete all as specified and directed.

All all as per item no 100 above but for AC/Geyser Point with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor (colour green), complete all as specified and directed.

S&F Switch piano flush type 5/6 Amps single pole one way , complete all as specified and directed.

S&F Switch piano flush type 15/16 Amps, single pole one way, complete all as specified and directed.

S&F Socket Outlet 2 in 1, 3 pin 5 Amps flush type , complete all as specified and directed.

S&F Socket Outlet 2 in 1 3/6 pin 5 and 15 Amp flush type , complete all as specified and directed.

S&F Bell push, flush type 5 Amps, complete all as specified and directed.

S&F electronic fan step regulator fiush type 120 watt, 230 Volt complete all as specified and directed.

S&F ding dong bell, AC, 230 volts, single pole complete all as specified and directed.

S&F lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 7W LED bulb, complete all as specified and directed.

S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size, complete all as specified and directed.

M&L in repair for two single core (submain) PVC insulated cable with 6 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 25 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces , complete all as specified and directed.

All as per item No. 112 herein before but with 10 sqmm and 6 sqmm as earth wire, complete all as specified and directed.

S&F in repair sheet metal enclosure flush type, Single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB with 20 Amps, complete all as specified and directed.

S&F in repair Sheet metal enclosure DB, single pole and neutral 8 way with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface, complete all as specified and directed.

S&F in repair loadline distribution box 4 way, AC, TP & neutral metal enclosure, glazed double door, 415V AC, IP-43, factory made internally prewired, concealed type with IP-43 protection complete with suitable bus bar, neutral link, earth link suitable for MCCB 125/160 Amps as incomer and MCB SP as out going complete all as directed (Note : MCCB and MCB SP will be measured & paid seperately)

S&F MCCB 4 pole, 125 amps, 415 volt, AC, fixed type with breaking capacity 16 KA suitable for load line DB incl connection , complete all as specified and directed.

S&F MCB SP 240 Volts, 10 KA breaking capacity 'C' curve incl connection, complete all as specified and directed.

(a) 10 to 32 Amps

(b) 40 Amps

S&F MCB SPN 63 amps, 240 Volts of 10 KA breaking capacity 'C' curve incl connection complete all as specified and directed.

S&F in repair on wall / ceiling LED batten lighting fixture 20 watts LED 5700K (4'), with extruded aluminium heat sink, integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block, complete all as specified and directed.

S&F in repair ultra modern recess mounting 36 Watts, 5700 K, 2x2 LED flat panel complete with integrated electronic driver, soft-light and glare free symmetrical illumination, suitable for POP ceilings high brightness SMD LEDs, etc including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block , complete all as specified and directed.

S&F in repair energy saving security light fitting of 45 watts LED pressure die-cast aluminium IP 66 roadway luminaire with high power LED as light source comprising with electronic driver and all accessories pre-wired incl connecting up with PVC insulated copper conductor cable 1.5 Sqmm, 3 core as required for connections and 50 mm bore light grade G. I. tube mounting bracket of 1.5 meter in length, bend to shape at 140 degree in ‘L’ shape and fixed to wall by means of 02 nos. of 40 x 5 mm flat iron clamps, nuts, bolts and washers etc, complete all as specified and directed.

Taking down light fitting any type/wattage carefully and refixing at wall/ ceiling after re-wiring at desired/ directed location incl connection complete all as directed

S&F in repair fresh air ventilating Fan 230/250 mm sweep, 230V, AC, plastic body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall of required size and making good disturbed surface and old fan to be deposited in MES store, complete all as specified and directed.

S&F ceiling fan 1200mm sweep BEE 5 Star rated, 230 Volt, AC with all accessories incl connection and old fan to be deposited in MES store , complete all as specified and directed.

S&F exhaust fan 300mm sweep, single phase, 230/240 Volt, heavy duty, steel body with louver and accessories, fixing of exhaust fan on wall incl making hole of suitable size of hole as required in wall with all fixing arrangement & connection with PVC flexible three core copper wire of size 1.5 sqmm and old fan to be deposited in MES store , complete all as specified and directed.

All as per item No. 126 herein before but 450mm sweep

Taking down fan any make from ceiling carefully, cleaning to remove any type of sticky dust with cleaning material as required and re-fixing in its original position with necessary connection after repairing, greasing, oiling, replacement of minor items such as pins, nut bolts, flexible wire etc incl spray painting in white colour complete all as directed of following type/size of fans :-

(a) Ceiling fan any sweep

(b) Exhaust fan any sweep

M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete

AAYUSHI ENTERPRISES

The new hut furnitures