PROVN OF WAITING ROOM AT HQ 51 SUB AREA 20 HEAVY DUTY WALL MOUNTED FANS FOR BLDG NO P 29 AT 17 CZW AND SPECIAL REPAIR TO BLDG NO P 83 OF 222 ABOD UNDER GE NARANGI

Amount

Surface excavation n.exc 30cm deep averaging 15.00cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Returning, filling including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each in soft / loose soil etc complete all as specified and as directed.

Removing of surplus excavated material exc 50m but n. exc 100m and depositing where directed at a level n. exc 1.5 m above the starting point etc complete all as specified and as directed.

Material and labour for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in coping / benching etc complete all as specified and as directed.

Material and labour for RCC 1:1½:3 type A1(20mm graded stone aggregate) nominal mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as directed.

Material and labour for RCC, 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in beams, seismic bands, cantilevers, bressumers and lintels over 1.5 m span complete all as specified and as directed.

Material and labour for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in column complete all as specified and as directed.

Material and labour for RCC 1:1.5:3, type A-1 (using 20 mm graded stone aggregate) as in chajjahs complete all as specified and as directed.

Material and labour for RCC 1:1.5:3 type A1(20mm graded stone aggregate) nominal mix as in Slabs supported on walls beams and columns in floors,roofs,landings, balconies,canopies,deck slabs and in shelves and the like etc complete all as specified as directed.

Material and labour for providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 in landings, cover slabs (for drains, manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified as directed.

Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Formwork to chullah hoods, chajjas, troughs and similar works as in rough finished surfaces complete all as specified as directed.

Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.

Material and labour for formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

Material and labour for form work on flat sides to soffits of suspended roof slabs not exceeding 200mm thick (Horizontal or sloping) rough finished surface of concrete all as specified and as directed.

Material and labour for mild steel TMT bars 10 mm dia and over cut to length, bent to shape as required including cutting, bending cranking, hooking end and binding with mild steel wire(annealed) not less than 0.9mm dia as in reinforcement bar complete all as specified and as directed

Material and labour for mild steel TMT bars 5 mm dia and over upto and including 10mm dia cut to length, bent to shape required including cutting, cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia as in stirrups, spacers and binders complete all as specified and as directed.

Demolition of brick work, built in cement mortar, including all quoins, arches, pillars including coping etc. complete all as specified and as directed.

Material and labour for brick work with sub class B bricks old size (locally available best quality) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for half brick work with sub class 'B' bricks old size (locally available best quality) straight or curved on plan to any radius, built in cement mortar 1:4 complete all as specified and as directed.

Taking down plaster of any description in cement mortar from brick/concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 5mm thick cement plastering in cement mortar 1:3 as on ceiling, chhajjas & other concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and fair etc cement complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for 15mm thick rendering in cement mortar (1:4), in two layers, under coat of 10 mm thick & top of 5 mm thick, to fair faces of brick or concrete wall surfaces, top layer 5 mm thick mixed with water proofing compound (@ 200ml/50kg by weight of cement or as per manufacture's instructions), finished even and smooth without using extra cement complete all as specified and as directed. Note : Water proofing compound to be measured and paid separately as "Supply only".

Supply only integral water proofing compound etc., complete all as specified and as directed.

Material and labour for preparation of old decorated plastered surfaces of ceiling applying one coat of white wash complete all as specified and directed.

Material and labour for preparation of newly plastered surface of wall or concrete surfaces and applying three coats of white wash etc complete all as directed.

Material and labour for preparation newly plastered surface and applying three coat of white wash on ceiling all as specified and directed.

Material and labour complete removal of existing wall surface and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of acrylic distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

Material and labour for preparation of new plastered surfaces , applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of acrylic distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

Material and labour for preparation newly plastered surface and applying two coat of exterior emulsion weather resistant/weather shield paint with primer on over & including a coat of 2 mm thick putty concrete/plaster surfaces including prepation of plastered or unplastered surfaces complete all as specified and directed.

Complete removal of existing wall surface and applying two coat of exterior emulsion weather resistant/weather shield paint with primer on over & including a coat of 2 mm thick putty concrete/plaster surfaces including prepation of plastered or unplastered complete all as specified and directed.

Material and labour for prepration of newly plastered surfaces of wall for application primer complete all as specified and directed.

Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

Material and labour for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for PCC type E2 1:5:10 using 40mm graded stone aggregate as in sub base complete all as specified and directed

Material and labour for water proofing treatment to sunken floor with polymeric water proofing membrane after cleaning the surface by wire brushes,brooming,removing dust and applying treatment as under :- (a) Material and labour Plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.50 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction. (e) Material and labour for for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proffing membrance @ 1.20 Kg/sqm. (f) M& L for blending of course dry sand @ 0.75 KG/Sqm

Material and labour for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new or previously untreated surfaces of steel and steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed.

Supply and fixing MS Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) of Fe 410W (Gde E-250) quality B complete all as specified and as directed.

Supply and fixing steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 with one shop coat of zinc chrome primer paint complete all as specified and as directed.

Dismantling Asbestos cement sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based corrugated steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminum and zinc alloy coating with steel based plain steel sheet 0.50 mm thick of a colour having tensile strength of 550 Mpa as in ridges/vally gutter fixed with self tapping screws complete all as specified and directed.

Material and labour for suspended false ceiling using E-grid (exposed ceiling suspension system) of grid size 600x600mm with main runner 38mmx24mm and wall angle 24mmx24mm using 4mm thick Non Asbestos fiber cement designer board (E-Board classic) in a grid of GI system duly suspended with 4mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures air conditioning diffuser and ducts, sprinkler, smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1220mm maximum c/c, the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall, flush fitting 1220mm cross tee to be interlocked between main runners @ 610mm c/c so as to from 600x600mm grid and painted with two coats of OBD over a coat of primer before installing it on the grid complete all as specified and directed.

Material and labour in repairs, for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 34 mm x 24 mm and wall angle 32mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in a grid of GI system duly suspended with 3mm dia GI wire hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid including dismantling complete all as specified and as directed.

Supply and fixing anodized aluminium fixed glass window and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, etc. and including 6 mm thick toughned glass and tacks and making good to disturbed surfaces complete all as specified and as directed

Supply and fixing for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item no 54 but without glazing bars

Supply and fixing Steel ventilators with top hung shutter including hinges, steel peg stay, coomplete, all as specified and as directed.

All as per item no 56 without glazing bars

Material and labour for framed work such as grills, grating, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways railing framework of water tank and siliar work all as specified

Hacking out old broken glass (any thickness, quality or description) from wooden/steel frame or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fixing 4 mm thick figured glass, pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm (with shutters & Grill without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters without taking off shutters from the frame) complete all as specified and directed.

Materials and labour for 1.25mm thick mild steel pressed steel frames of size 125x60mm for doors, double rebates incl necessary fixing lugs, 03 Nos 100mm size stainless steel (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5 graded stone aggregate) etc. complete all as specified and as directed.

Materials and labour for 1.25mm thick mild steel pressed steel frames of size 105x60mm for doors, single rebates incl necessary fixing lugs, 03 Nos 100mm size stainless steel (03 Nos for each shutter), lock strike plate, filling the hollow portions of steel frame with PCC 1:3:6 type C-0 (12.5 graded stone aggregate) etc. complete all as specified and as directed.

Supply and fixing flush shutters 30mm thick , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

Supply and fixing 35mm thick glazed and skelton shutters open rebated and prepared to receive gauze etc (without sash bail) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified

Supply and fixing in repair 18/19mm thick prelaminated medium density fibre board,commercial type,interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed.

Supply and fixing in repair 18/19mm thick prelaminated particle board,interior grade,(one side decoratve and other side balancing white), flat perssed, single or three layer type with BWR adhesive fixed to Timber frame work etc., fixed with screw complete all as specified and directed.

Supply and fixing continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

Supply and fixing in repairs 25 mm dia stainless steel tublar curtain rods minimum thickness 0.8 mm including fancy type with fixing brackets, stops, rollers etc. with bracket complete all as specified and as directed.

Supply and fix PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004

Supply and fixing anodized aluminium push pull type fully glazed door shutter (single leaf / double leaf) having top rail of section 85.00mmx44.45mmx2.00mm, bottom rail of section 85.00mmx44.45mmx2.00mm thick, door verticals of section 44.45mmx44.45mmx2.00mm thick and lock rail of section 85.00mmx44.45mmx2.00mm thick with aluminium anodized chowkats of section 63.50mmx33.10mmx2.50mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle and locking arrangement etc. 5.5 mm thick float glass tinted quality on top/bottom panel complete all as specified and as directed. (Note : Door closer shall be measured and paid separately)

Supply and fixing anodized aluminium sliding glazed window shutter (double leaf glazed shutter and single leaf mosquito proof shutter each in single frame work) without sash bars with anodized aluminium shutter of section 40.00mmx20.00mmx1.10mm thick and window chowkat of section 92.00mmx29.50mmx1.20mm thick including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws, handle, tower bolts and locking arrangement etc. and including 4mm thick sheet glass, tinted quality on panel and stainless steel wirecloth or aluminium anodized wire cloth for mosquito proofing, 0.45mm nominal dia and average width of aperture 1.40mm fixed with aluminium screws and tacks and making good to disturbed surfaces complete all as specified and as directed

Supply and fixing powder coated aluminium ventilators of Aluminium section weighing not less than 0.55kg/m, partially fixed and partially openable either top hung or side hung and bottom portion fixed having 4mm thick frosted glass and top portion having two shutters external shutter with 4mm thick frosted glass and interal shutter having stainless steel wiremesh 0.36mm dia for Bath / WC including rubber gasket and alumium beading with necessary cleats / locking arrangement complete all as per standard engineering practice including necessary cutting holes on wall and floor complete all as directed by Engr-in- Charge.

Supply and fixing stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Supply and fixing aluminium door closer (Die-cast) body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and as directed.

Supply and fixing 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Supply and fixing 150mm in size extruded aluminium handles, fabricated type, anodised complete all as specified and directed.

Supply and fixing 100 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Supply and fixing cold rolled stainless steel butt hinges 100 mm long medium weight complete all as directed.

Supply and fixing aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded section or cast aluminium alloy and fixed 300mm long complete all as specified and directed.

Material and labour for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Material and labour for 100 mm thick plain cement concrete (1:4:8) type D2 using (40 mm graded crushed stone aggregate) as in sub base of tiles/floor of hard standing/path etc complete all as specified and directed.

Material and labour for 75 mm thick, PCC 1:3:6, type C2 (using 40 mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide and 30 mm deep at every 2.4 mtrs interval filled with sealing compound grade 'A' etc complete all as specified and as direted.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises complete all as specified and directed.

Material and labour joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

Material and labour for joint free non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.38 sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for glazed coloured ceramic tiles of size 450 x350x7 mm thick on vertical surfaces set, jointed and pointed in net cement slurry and pointed in white cement mixed with colour pigments to match the existing surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Material and labour for coloured non skid cermic tiles 6 to 7mm thick (Square/rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fix vitrified tiles 10mm thick light shade area of each tile n exc 0.36sqm in floors, set and jointed and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

Material and labour for 10mm thick vitrified tiles light shade area of each tile n exc 0.36sqm as in vertical surfaces such as skirting/dados etc etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Material and labour for granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.

Material and labour machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over complete all as specified and as directed.

Supply and fixing in repairs pre- polished chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with white cement and pigment over and including 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Material and labour heavy duty parking tiles size 300mm X 300 mm X 10 to 12 mm thick /400 mm X 400 mm X 10 to 12 mm thick white cement and pigments of approved maked jointed with cement slurry and pointed with white cement mixed with pigment to match with the tiles over and including screed bed of 20 mm thick in cement mortar (1:6) complete all as specified and directed.

Taking up or down steel water tubing 15 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fixing GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Taking up or down steel water tubing 20 mm bore from trenches/wall,ceiling or floors including all fittings complete all as specified and as directed.

Supply and fixing GI tubing 20 mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and as directed.

Supply and fix rotational moulded polyethylene water storage tank 500 litre capacity of triple layered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule ncluding dismantling of old tank of any description complete all as specified and directed.

Supply and fix angular stop valves 15 mm dia cast copper alloy, fancy type chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or unions complete all as specified and directed.

Supply and fixing in repairs stop valves 15mm fancy type Chromium plated with long shank and cup(concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends.

Supply and fixing in repairs stop valves/angle valves 15mm fancy type Chromium plated with long shank and cup cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends.

Supply and fixing pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

Supply and fixing in repair bib taps 15 mm bore cast copper alloy fancy type Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed.

Supply and fix in repair 125 mm dia, chromium plated swivel type shower rose with 195 mm long chromium plated shower arm and wall flange suitable for fixing 15mm bore iron pipe all as specified and directed

Supply and fixing in repairs stainless steel grating doom 125mm dia of complete all as specified and as directed.

Supply and fixing in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

Supply and fixing in repairs brass chromium plated tubular towel rail of 20mm dia of 60cm in length, D shaped, with brass chromium plated brackets completed all as specified and directed.

Supply and fixing vitreous china wash down water closet (EWC) pan (pedestal pattern) white, including seat cover, closed pattern with flat bottom and cover with chromium plated hinging device complete all as specified and as directed.

Supply and fixing in repairs, vitreous china wash down water closet (padestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for padestal pan with mild steel chromium

Supply and fixing PVC low level flushing cistern, pastel coloured, 10 ltrs capacity, valveless, syphonic action type including all fittings and flush pipe, PVC connection pipe complete all as specified and as directed.

Supply and fixing in repairs PVC low level flushing cistern of 10 ltr capacity fixed in repair including siphan float valve and rubber cone etc complete all as specified and directed

Supply and fixing vitreous china wash hand basin colour flat back of size 550x400mm including brackets, chormium plated pillar tap, waste coupling, PVC waste pipe complete all as specified and as directed.

Supply and fixing in repair vitreous china wash hand basin, white flat back size 550x400 mm including brackets including 32 mm PTMT waste coupling suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) complete all as specified & directed.

Supply and fixing in repairs sink with drainage board made of 304 stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortat to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 940mm x 460mm bowl size 405mm x 354mm x 229mm complete all as specified and as directed.

Supply and fixing grating doom 125mm dia with waste hole of PTMT (Min weight 40 gms). complete all as specified and directed.

Supply and fixing glass shelf of size 450x150mm size with CP guard rail below mirror for keeping soap box etc complete all as specified and directed.

Supply and fix health faucet ABS with 1.2m SS flexible tube and ABS wall hook fixed with necessary fixers complete all as specified and as directed.

Supply and fixing CP soap dish fixed to wall with brass chromium plated screws complete all as specified and as directed.

Supply and fixing in repair CP soap dish fixed to wall with brass chromium plated screws complete all as specified and as directed.

Supply and fix fancy type brass chromium plated toilet paper holder fixed with chromium plated brass screws and plastic cleats complete all as specified and as directed

Supply and fix stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixed complete all as specified and as directed

Supply and fixing in repair 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

Cutting existing steel tubing of 40mm dia for addition / insertion of new Tee / Elbows / Socket etc. (Each cut measured) by screwing existing pipe line complete all as specified and as directed.

Supply and fixing tubular towel rail of 20mm dia of 60cm in length, D shaped, with brass chromium plated brackets all as specified and directed.including brackets complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc, including cleaning and refixing or removal to store (meaasured overall as fixed along the centre line over fittings and access complete.

Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing PVC (SWR) pipe 110 mm bore single socketed in any length with adhesive joint fixed to laid in trenches or floor/wall including ms clamps complete as specified complete all as specified.

Supply and fixing 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Supply and fixing 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door complete all as specified and directed.

Supply and fixing 75 mm dia PVC ( SWR) floor trap with dome type grating including jointing with solvant etc.

PVC (SWR) bends/shoe of any radius for 110 mm bore complete all as specified.

Supply and fixing PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete as specified complete all as specified.

Supply and fixing PVC (SWR) vent cowl for 110 mm bore pipe

PVC (SWR) bends/shoe of any radius for 75 mm bore complete all as specified.

Supply and fixing in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

Cutting into existing manhole for connecting new drain pipe (150mm dia),making good to pipe and rendering, cutting out existing benching for and forming brench chennel in cement concrete 1:2:4 type B-1 smooth finished etc. all as specified and as directe

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in concrete bed to drain pipe including packing under and haunching against the sides of pipe after they are laid and tested in cement concrete bore of pipe 110mm all as specified.

Material and labour Concrete bed in cement concrete 1:3:6 type C-2 to drain pipes 150 mm bore Pipe including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.

Supply and fixing SGSW pipes 150 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors and jointed complete all as specified and directed.

Taking down carefully any type of point wiring (light, fan, bell, socket or power), complete excluding fittings but including switches, ceiling roses, pendants, regulators, sockets, etc. and making good disturbed surfaces of walls, ceiling, floors etc to match with existing surface complete all as specified and as directed.

Taking down ceiling/exhaust/wall fan including connection wires carefully, and deposit to MES store in safe custody complete all as specified and as directed.

Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS-694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly) laid/fixed with and including PVC rigid conduit on walls/ceiling ( concealed), with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed.

All as per item serial No 149 here-in-before but for One 3 pin 5 Amp switch socket outlet on same board with other switches.

All as per item serial No 149 here-in-before but for One 3 pin 5 Amp switch socket outlet on independent board.

All as per item serial No 149 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable and earth continuity wire with 2.5 Sqmm cable for 6 pin 15 Amp socket outlet on independent board.

Supply and fixing switch piano, flush type single pole one way 5 Amps 230 volt complete all as specified and as directed.

Supply and fixing modular switch single pole one way 6 Amps 240 volt complete all as specified and as directed.

Supply and fixing socket outlet 3 pin, 2-in-1, 5 Amps flush type complete all as specified and as directed

Supply and fixing switch socket combination outlet 5 pin, 2-in-1, 5 Amp flush type complete all as specified and as directed.

Supply and fixing switch socket combination multipurpose, 2 in 1, 6 pin, 5 & 15 Amp flush type complete all as directed.

Supply and fixing modular switch one way 16 Amps , 1 module 240 volt complete all as specified and as directed.

Supply and fixing triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole MCB of rating 63 Amp suitable for three phase 415 V complete all as specified and as directed

Supply and fixing modular socket 6 Amps 2/ 3 pin, combined 2 module complete all as specified and as directed.

Supply and fixing modular socket 16 Amps 2/ 3 pin, combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed..

Supply and fixing lamp holder insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.

Supply and fixing stepped type electronic fan regulator, flush type complete all as specified and as directed.

Supply and fix in repair LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fix LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of uitable size complete all as specified and as directed.

Supply and fixing in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put difffuser 2 feet, 10 Watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in repair LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and impact resistance of IK 07 complete all as specified and as directed.

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection and impact resistance of IK 07 complete all as specified and as directed.

Material and labour building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m ,1400 rpm with sweep with, blades, and frame and louver including making hole in existing wall suitable for fixing of exhaust fan and making good complete all as specified and directed.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300m complete all as specified and directed.

Supply and fixing heavy duty Electric wall circulator metal heavy duty fan of 600 mm sweep 180 watt AC single phase of 230 Volts 50 Hz of air delivery 270 CMM 1440 RPM and oscillation 4 per minute with aluminium back and front body including sheet metal base & plastic and in approved colour powder coated and blade aluminum, three leaves, wobble free and adjustment can be swiveled in the vertical plane in 4 different positions MS wall mounting and including fixing on Truss , Channel, wall with connectd items and welding and nut bolts as required on site complete all as specified and directed .

Material and labour for shifting split type AC 1.5/2.0 TR capacity including disconnection of out door & indoor unit, reinstallation of the same to new location after necessary servicing including testing and commissioning and refilling of gas if required complete all as directed.

Supply and fixing repair factory made, sheet steel distribution boards, TPN, 4 Way, protection class IP-43 with min 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed

Supply and fixing in repair SPN, DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar including grouting In wall with PCC ( 1:2:4) type B-1 complete all as specified and as directed.

Supply and fixing SPN, DBs 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 200 Amp rating copper bus bar including grouting In wall with PCC ( 1:2:4) type B-1 complete all as specified and as directed.

Supply & fix in MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate.

Supply and fixing 20mm bore, gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe or for union complete all as specified and directed.

Supply and fixing in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415V, 50 Hz, 10 kA, B-series rupturing capacity providing in DB complete all as specified

Supply and fixing MCB SP 40 Amps, 240 V, 50 Hz, B series breaking capacity 10KA all as specified and directed.

Supply and fixing in repair/replacement MCBs, SP 6 to 32 Amps in accordance with IS/IEC 60989-1, 240V, 50 Hz, 10 kA, B-series marked fixing in DBs (DBs catered separately in this schedule).

Supply and fixing MCBs, SP 6 to 32 Amps in accordance with IS/IEC 60989-1, 240V, 50 Hz, 10 kA, B-series marked fixing in DBs (DBs catered separately in this schedule).

Supply and fixing in repair/replacement MCBs, SPN 32 Amps in accordance with IS/IEC 60989-1, 240V, 50 Hz, 10 kA, B-series marked fixing in DBs (DBs catered separately in this schedule).

Supply and fixing MCBs, SPN 32 Amps in accordance with IS/IEC 60989-1, 240V, 50 Hz, 10 kA, B-series marked fixing in DBs (DBs catered separately in this schedule).

Supply and fixing MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed

Material and labour for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including taking down old one and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

Material and labour for earthing complete with GI earth plate electrode of size 60cm x 60cm x 6.3mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including 4mm dia GI wire upto 7.5 m by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 15mm dia GI pipe connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, charcoal,salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed.

Material and labour for Sub main wiring with 2 runs of 6.0 sqmm, single core, FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. (Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.)

Material and labour for Sub main wiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith two run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 4 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 25mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith two run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion and type of conduit complete all as specified and directed. Note: 4 run of 6 Sqmm cable and 2 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 2.5 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 2.5 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion and type of conduit complete all as specified and directed. Note: 2 run of 2.5 Sqmm cable and 1 run of 2.5 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4.0 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2.0 core laid in trenches /floor or fixed on wall/pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.

Material and labour for for sand cushioning with dry river sand in trenches for cushioning of underground cable including spreading, leveling, punning complete all as specified and as directed. Note : Punned thickness will be measured and paid.

Material and labour for sub class ‘B’ old size, well burnt brick, laid flat in trenches over the cable with length of brick perpendicular to length of cable for protection of LT cable complete all as specified and as directed.

M/S M Ahmed and Co. (BID ID -3192912)

K K Construction Co (BID ID -3199845)