Renovation works at corridor of 2nd floor, IIPA, Indraprashta estate, ring road, New Delhi

SUMMARY FOR THE BILL OF QUANTITIES (BOQ) for CORRIDOR at Second floor, IIPA, New Delhi

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 CIVIL & INTERIOR WORKS 16,42,180.53 12,62,735.27

2 ELECTRICAL WORKS 5,50,037.00 3,99,810.68

3 FIRE ALARM & PA SYSTEMS 7,78,528.00 0.00

TOTAL i/c GST 46,33,291.47

Digitally signed by AMIT

BOQ FOR RENOVATION WORKS OF CORRIDORS AT GROUND, FIRST AND SECOND FLOOR AT IIPA, NEW DELHI

Sr. No. Description Unit Quantity Rate DSR Amount NDSR Amount

1 Dismantalling

Dismantling tile work in floors and roofs laid in cement mortar including stacking material

within 50 metres lead.

15.23.2 For thickness of tiles above 25 mm and up to 40 mm SQM 350.00 113.35 39,672.50

Dismantalling of PVC/ plywood wall panelling including stacking of serviceable material

and disposal of unserviceable material within 50 metres lead.

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster

including disposal of rubbish to the dumping ground within 50 metres lead.

Based on Dismantling tile work in Wall dado laid in cement mortar including stacking material within

15.23.2 50 metres lead.

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling

1.4 15.57 including disposal of unserviceable surplus material and stacking of serviceable material SQM 50.00 56.35 2,817.50

with in 50 meters lead as directed by Engineer-in-Charge.

Dismantalling of existing duct, grills, diffuers, and other related components complete

1.5 MR including disposal of unserviceable material and stacking of serviceable material with in 50 SQM 350.00 144.21 50,472.59

meters lead as directed by Engineer-in-Charge.

1.6 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate)

2 11.3 finished with a floating coat of neat cement, including cement slurry, but excluding the

cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate SQM 350.00 614.20 2,14,970.00

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement

mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm

including grouting the joints with white cement and matching pigments etc. The tiles must

be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the

notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet

for placing the tiles gently and easily.

11.41A.2 Glazed vitrified floor tiles polished finish of size

4 13.4 ROUGH CEMENT PLASTER :- 12 mm cement plaster of mix

TILE DADO :- Providing and fixing Vitrified tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours and shade of size 800 x

Based of 1200mm as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12

DSR 8.31 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey

cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of

matching shade complete.

Wall painting with acrylic emulsion paint, having VOC content less that 50 grams / litre, of

6 13.82 approved brand and manufacture, including appliying additional coats wherever

required, to achive even shade and colour.

PANELLING- Panelling using 12mm thick, fire rated ply fixed on one side on Aluminium

7 MR Frame 50mm x 25mm x 1.5mm as per approved sample and architectural drawings. SQM 110.00 2,670.49 2,93,754.07

Aluminium frame to be fixed to walls, floor and RCC Ceiling using fastners.

LAMINATE CLADDING- P/F 1mm thick laminate including 4 mm thick MDF, on an existing

Plywood surface.

Preparation of complete set of shop drawings including finishing, MEP services, details,

design calcualtions etc. and any other details as and when desired by Engineer In charge

/client. A qualified professsional for the purpose shall be appointed after due appproval

from Engineer In Charge.

Digitally signed by AMIT

Polishing in high gloss/matt finish melamine clear polish on wood work in required

color/wooden shade texture with following process in the sequence as detailed below:

1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand

paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing

sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.

3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample

water to remove excess sealer layer and make the surface further smooth after this wet

rubbing, then surface is applied with special grade melamine fillers to fill all the small and

big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light

wet rubbing is done this surface is further allowed to dry for 12 hrs. SQM 70.00 3,049.85 2,13,489.50

4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear

polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs

then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12

hrs. The final melamine polish is applied with compressor pressure spray gun using

melamine clear polish and melamine thinner mixed in required proportion complete as per

direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of

GYPBOARD CEILING :- Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power pressed from M.S. sheets and

galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and

37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers

of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing

of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of

80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with

connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction,

including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and

Including jointing and finishing to a flush finish of tapered and square edges of the board

with recommended jointing compound , jointing tapes , finishing with jointing compound in

3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for

board, all as per manufacturer's specification and also including the cost of making

openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting with :

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I SQM 100.00 1,355.80 1,35,580.00

Providing the gypsum single sided cove of 150mm x 150mm having a facia of 75mm to

macth the specifications same as gypsum ceiling.

SITC of customised prints with photo frames as per approval of client/ engineer-in-charge.

Size upto 900 x 750mm

Supply , installation ,testing and commissioning of 'MCB double door Distribution Boards

dust and vermin 'proof protected and AC supply operation including incoming

MCB/ELCB/RCBO/MCCB as per specifications and required capacity Neutral bar and

Earth Terminal complete as required and installed in concealed in wall after necessary

chase cutting with finishing /surface on wall including all fixing materials required.

12Way TPN MCB DB(Vertical type) with 63A 4P RCCBas incoming and 36 nos (6-32A-10KA

)SP MCB as outgoing.(ACDB)

Digitally signed by AMIT

Supplying and fixing following way, vertical type three pole and neutral, sheet steel, MCB

distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar,

neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing

etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

14 2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as require

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supply, fabrication and fixing of steel frame work in position for cable tray/Panels

fabricated out of 10 mm dia GI rods, ISA-40 MS angle iron, ISMC-50 channels, flats

17 etc.complete with providing of Anchor fastners and all necessary hardwares as required

for fixing, including cutting, bending, welding, drilling, bolting etc. as per design as required

and painted with one coat of primer and two coats of enamel paint of approved shade.

Supply and fixing of Perforated type 2mm thick Hot dip Galvanised G.I. cable tray of

following sizes complete with bend/tee joints, coupling plate & nuts bolts etc. as required

for fixing and including the cost of providing loop earthing with 2 nos. 50 mm x 6 mm GI

earth strips complete as per specifications, as required and as below.

Dessing of existing cables, wires, conduits, etc. neatly in cable tray using necessary claps.

The item to including termination and extension of wires wherever requied. The cost to

18 MR include removing and disposal of all extra wires, cables and conduits as per instructions of RM 130.00 1,137.01 1,47,811.86

engineer-in-charge. Cable tray to be paid seperatly. Per running meter of corridor to be

measured for payment.

Point wiring for light point /Fan/Exhaust Fan point/ call bell point using 2 runs of 1100 V

grade 1.5 sqmm & one run of 1.5 sq.mm FRLS insulated multistranded copper wires, in &

including 25 mm dia , MS conduit surface/ concealed in wall / ceiling conferming to IS 732

including all accessries such as junction boxes , conduit bends, elbows and ceiling rose ,

and anodised GI switch box with modular switch ,modular plate and the box covered with

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

20 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire Per mtr. 150.00 327.00 49,050.00

Supply and fixing of following sizes of MS conduit along with accessories in surface /recess

21 1.20 including painting in case of surface conduit,or cutting the wall and making good the

same in case of recessed conduit as required

SITC of Recessed mouted PDC lowdepth(height should not be more than 35mm) COB

downlights with maximum 12 Watt with minimum 1320 lumen.The product should be SMD

based & have non integral isolated driver with 2KV inbuilt surge protection. THD<10%, PF

>0.9,Product should have life class of 50K burning hour at L70 B50 parameter, Luminiare

operating temp 0 D to 45D. Internal wiring should have teflon coted multi strand wires and

external wire should have PVC coated multistrand wires.

23 MR SITC of decorative wall light fixture as per approval. Base Rate: Rs. 2000/- Nos. 35.00 2,946.36 1,03,122.74

Digitally signed by AMIT

SITC of Extruded Aluminium surface mounted 36Watt, 4000 lumen LED batten with PC

Diffuser and Spring Steel Clamps for Surface Mounting arrangement. Driver THD<15%, PF

>0.9,with 2KV inbuilt surge protection. Internal wiring should have teflon coted multi strand

wires and external wire should have PVC coated multistrand wires.

FIRE ALARM & PA SYSTEM

Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules

and capable of supporting not less than 240 devices (including detectors) and minimum

120 detectors per loop and loop length up to 2 km, network communication card,

minimum 320 character graphics/ LCD display with touch screen or other keypad and

minimum 4000 events history log in the non volatile memory (EPROM), power supply unit

(230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with

automatic charger. The panel shall have facility to connect printer to printout log and

facility to have seamless integration with analog/digital voice evacuation system (which is

part of the schedule of work under SH: PA System) and shall be complete with all

accessories . The panel shall be compatible for IBMS system with open protocol BACnet/

Modbus over IP complete as per

Supplying, installation, testing & commissioning of intelligent analog addressable

photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable manual call point

complete as required.

Supplying, installation, testing & commissioning of addressable horn cum strobe complete

Supplying, installation, testing & commissioning of fault isolator complete with base as

CABLES & ACCESSORIES FOR FAS :

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required.

SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of digital audio amplifier 50 Watt, 25V rms

operating at 240 volt AC supply complete as required.

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5

Watt in ABS enclosure complete as required.

CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in

17.5.3 the existing surface / recessed steel conduit of following pairs, cores and size including

connections and interconnections etc. as required.

17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 200.00 54.00 10,800.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

and accessories like coupler etc. as required.

Digitally signed by AMIT