SPECIAL REPAIRS TO SECURITY WALL AND FENCING AT PORTHAPUR AF STN AND PROVN OF FOL STORAGE AT MT PARK UNDER GE BRICHGUNJ.

Amount

Demolition of brick work built in cement mortar or lime mortar complete of any description complete all as specified and as directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed.

Material and Labour for PCC 1:3:6 type c1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and as directed.

Material and Labour for rendering in CM 1:6, 15mm thick on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and as directed.

Supplying and fixing Mild steel angle iron work as in struts and posts in fencing including cutting tops to shape as directed, drill holes, notching for wire, etc flat iron fillets (for securing wire mesh and wire any type) including all necessary drilling, bolting or rivetting and embedding in concrete and screwing etc, and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed.

M & L for prepatring Old steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all as specified and as directed.

Supplying and fixing of galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia bars at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line of wire to be meassured ) complete all as specified and as directed.

S & F Concertina Coil Fencing with Punched Tape Concertina Coil made from High Tensile Spring Steel, High Carbon Wire conforming to IS – 4454 [Part – 1], of Grade – SM duly Hot Dipped Galvanised as per IS – 4826 with 230GSM, 600mm dia, 10 Metre openable length, with Galvanised coating and Punched Tape material as per IS – 513, having 50 Nos Rounds per 6 Metre length [before stretching], having medium barbs [Barb Length 24±1mm, Barb Width 19±1mm, Pitch between Two Barbs 35±1mm], Spring Core Wire [2.6 mm thick] of high tensile strength of 165 Kg / Sq.mm with tape [0.52mm thick] and weight 43.478 Grams / Metre and fixing to “Y” or Trapezoidal shaped angle iron brackets placed at 2.00m to 3.00m apart and with 6/9 horizontal RBT [Reinforced Barbed Tape] Wire, Stud tied with GI Staples and GI Clips to retain horizontal, including necessary bolts and coating with Px Compound [Anti Rust] complete all as specified and as directed. Note: Horizontal barbed wire & angle iron supports shall be measured and paid separately under relevant items of Schedule "A". Measurement shall be made for stretched length.

S &F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework ofwater tanks and similar workcon- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

M & L excavating over areas, n exc 1.5 m deep and getting out Hard/Dense Soil complete all as specified and directed.

All as per Item No.11 for each additional 1.5m or part thereof in depth beyond the first 1.5 m and getting out Hard/Dense Soil complete all as specified and directed.

Excavation in trenches n. exc. 1.5 m wide and not exceeding 1.5 m in depth, for foundation, etc or for shafts, walls, cesspits, manholes, pier holes, etc getting out in any type of soil, complete all as specified and as directed.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling complete all as specified and directed.

M & L for RCC- M - 30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L Reinforced cement concrete (design mix M-30 grade using 20mm graded aggregate) above top of footings including attached pilasters and buttresses complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for RCC- M -30 Design Mix as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in,shelves and the likeall complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excvated soil to a distance n.exc 50 m and depositing complete all as specified and directed.

Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for fair finished surfaces complete all as specified and directed.

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

Use and waste of form work to sides and sofit of Beams for Fair finished surfaces complete all as specified and directed.

Use and waste of form work to sides and sofit of Slab & Chajja etc for Fair finished surfaces complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L Mild steel TMT bars 6 mm to 8mm dia cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia complete all as specified and directed.

Ditto, but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like complete all as specified and directed.

M&L Precast Cement Concrete Block Masonry with Solid Block, exc 10cm in width in type C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and directed.

M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-O to horizontal or vertical surface including necessary formwork complete all as specified and directed.

M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering in two layers of 10mm thick backing coat in CM 1:6 and 5mm thick floating coat in CM 1:4 mixed with water proofing compound on all external wall surfaces finished even and smooth without using extra cement. (Note : Water proofing compound shall be measured and paid seperately)

Supply only integral WPC (3% by wt of cement).

M&L preparation of newly plastered surfaces of wall and applying two coats of Oil Bound distemper over a coat of primer over a coat of internal wall care putty complete all as specified and directed.

M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and directed. (Make Apex Ultima)

M&L Spreading and levelling in layers n exc. 25 cm thick or in foundations including watering and consolidation complete all as specified and directed.

Surface excavation n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out in hard/ dense soil complete all as specified and directed.

M&L Hard Core of gauge n.exc. 63mm deposited spread and levelled in layers n.exc. 15 cm thick watered and rolled/ rammed to a true surfce complete all as specified and directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate in 75mm thick as in sub base complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in 40mm thick complete all as specified and directed.

M&L PCC 1:3:6 type C1 using 20mm graded aggregate of 75 mm thick as in Plinth Protection complete all as specified and directed.

M & L Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 20mm thick set, jointed and pointed in neat cement slurrry in floors including 20mm thick screed bed in Cm 1:4 complete all as specified and directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; and grade of Fe-410- W(Gde- E-250) quality- B also fastening and fixing complete all as specified and directed.

S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe-410-W grade E 251 Quality B complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Mild steel bolts of diameter of neck exc 12mm and n.exc 20mm, purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut n exc 30cm long complete all as specified and directed.

Preparation of new or previously untreated steel surfaces & applying a two coats of synthetic enamel paint over a coat of red oxide primer over 10cm in width or girth,not otherwise described complete all as specified and directed.

S&F 0.50 mm thick pre painted galvalume aluminium zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and directed.

S&F 0.50 mm thick pre painted galvalume aluminium zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws complete all as specified and directed.

S&F MS works as in wind ties for roof incl securing bolts etc complete all as specified and as directed.

S & F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L Painting to new steel and iron surfaces of n exc 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified and as directed.

M & L for flameproof surface wiring on wall/ceiling / roof with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper multistranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for one light, fan point controlled by one switch Note : Junction boxes sahll be measured separately

S&F flame proof weather proof threaded type junction box LM 6 aluminium alloy 2 to 4 way complete all as specified and directed.

S&F flame proof weather proof metallic hose conduit 3/4 " dia 300 mm long complete all as specified and directed.

S&F flame proof double compression brass cable gland 3/4" dia complete with nipples complete all as specified and directed.

S&F Flame proof weather proof switch with cable termination in LM 6 aluminium alloy housing 16 Amp, 240 volts complete all as specified and directed.

S&F Flame proof weather proof exhaust fan 450 mm sweep' 1440 RPM single phase 230 volts complete with louvers & all accessories & fitting arrangements

Supply and Fix CIMFR certified LED flame proof tube light fitting 1 X 16/20 Watts, with driver & LED tube rod, IP 65 protection, including connecting up with three core flexible multi strand copper conductor of size 1.5 Sqmm with flexible metal conduit, including fabrication and fixing of red oxide coated brackets made out of MS angles/MS flat for fixing the fitting up to one meter below permenent ceiling, including anchor fastners, nut bolts, hooks, chain etc. Make : Crompton cat no -EXTN1LT8-16/20 /Bajaj/ Sudhir Note : (a) Fittings shall will be installed in Hangers/Sheds, hight up to 6 Meters only and directed by Engr-in-Charge. (b) T & P, Ladder for any height etc are deemed to be included in the quoted rate.

Supply and fixing LED light fitting 1x60 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. Note for Srl item No 4 to 9:- Make : Bajaj/Sudhir/FCG/Shyam switch gear Pvt Ltd.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used SPN 4 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs.

All as per item no. 62 above but SPN 32-40 Amps -do-

M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site.

Supply, lay, test and commissioning under ground XLPE insulated and PVC sheathed, armoured heavy duty under ground cable, suitable for earthed system, laying in trenches/duct sleeving through pipe in duct, ISI marked with aluminium stranded conductor 1100 volt grade of cross section area 4 Core 10 sq mm.

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

S&F tube light grade galvanised with all fittings laid in trenches of 50 mm bore.

Material and Labour for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making good with cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road complete all as specified and as directed.

M/s Kamal Electrical

M/s Gurunath Construction

SALCON ENGINEERS AND FABRICATORS

P Babu

RPG AND COMPANY

Nirman Construction Company

ANITA VARMA ENTERPRISES