Repair and Paint Work Terraced Garden for upcoming Chrysanthemum Show 2025, Sector -33,Chandigarh under Revenue Head

Finishing walls with acrylic Smooth exterior paint of required shade:- Old work (one or more coat applied @ 0.96 ltr/10 sqm) on existing cement paint: (DSR:14.66.2)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work. (DSR 14.54.1)

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR 7.2.1)

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. as required. (DSR 10.25.2)

Providing and applying JK putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR 13.26)

Reworking on existing defaced/ faded / damaged artistic work/ drawing using good quality paint by skilled artist on wall as as per entire satisfaction of Engineer In-Charge

Providing and fixing Morbi tiles (thickness to be specified by the manufacture of approved make over 12mm thick bed of cement mortar 1:3 (: 1 cement : 3 coarse sand) and jointing with cement slurry @ 3.3kg per sqm complete in all respect to the entire satisfaction of the Engineer-In-Charge.

Removing dry or oil bound distemper water proffing cement paint and the like by scrapping sand parering and preparing the surface smooth including necessary repairs to scratches etc. complete as per direction of Engineer-in-Charge. (DSR 14.46)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer (DSR 13.41.1)

Providing and fixing M.S flat gate having flat size 50 x12 mm having 5'-0" long of each openable shutter and 2'-3" high above ground level and ,1'-0" below ground level welded with 2 no's M.S flat 40 x10mm including horizontally at 6' upper and 6' from bottom and 10 no's M.S square bars of 45 degree angle at 6'' center to center between the 2 no's horizontally M.S flat 40 x 10mm including the 2 no's M.S. Channel 75x40mm in posts having 2no's channel welded to form post of size 75x80mm & 5'-0" long with lugs 1'-3" long 2no's M.S. Flat 40x10mm at bottom under each post to be provided on both sides of shutter with 2 no's hinges for openable arrangements with sliding bolt for locking arrangements and gate shall be properly embedded in cement concrete 1:2:4 be painted with two coats of approved quality paint over one coat of primer complete in all respect to the entire satisfication of Engineer- in-Charge.