REPAIRS TO CERTAIN PLUMBING, TILING, JOINERY, SANITARY FITTING, PLASTERING AND OTHER MISC WORKS TO JCOS/OR MD ACCN OF MH FATEHGARH

Amount

Demolition of brick work or stone /boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M & L Brick work using old size sub class B bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as soecified and directed.

M & L Brick work using old size bricks (Except brick) straight or curved on plan exc 6 m mean radius built in cement mortar 1 : 6 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for 75 mm thickness PCC 1:3::6 type C2 using 40mm stone aggregate in plinth protection including finishing smooth without using extra cement, all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L for rendering 15mm thick plaster in CM 1:4 on fair faces of brick work complete all as specified.

M&L 15mm thick cement plastering in cm 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement all as specified and directed.

M & L Two coats of Oil bound distemper on new plastered wall suerfaces over a coat of chalk whitening including preparation complete all as specified and directed.

M&L for prep of new plastered surfaces & applying 2 coats of cement base paint over a coat of primer complete all as specified and directed.

Dismantling of asbestos cement sheets of any description (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or crankd hook bolts in roofs complete all as specified and directed.

Dismantling of floor hearth or wall tiling any type including cement mortar bedding complete all as specified and directed.

S&F glazed coloured ceramic tiles of sizes 350x250x7mm/450x350x7mm thick on vertical surface over 10mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceedifng 0.11 sqm but not exceeding 0.18 sqm in floors and skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm screed bed in CM 1:6 complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed.

M & L 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps , jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) 15 mm thick CM including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Taking up or down of 15 mm dia GI tubing and connections,complete all as sepcified and directed.

Taking up or down of 20 mm dia GI tubing and connections,complete all as sepcified and directed.

M&L for laying of 15 mm dia medium grade GI tubing incl all fittings laid in fl;oors /fixed on walls,complete all as sepcified and directed.

M&L for laying of 20 mm dia medium grade GI tubing incl all fittings laid in fl;oors /fixed on walls ,complete all as sepcified and directed.

S&F in repair gun metal gate valve 20mm dia, globe with iron wheel head, screwed both ends for iron pipe and fixed ,complete all as sepcified and directed.

S & F in repair Vitreous China Wash hand basin white flat back of size 550 x 400 mm including brackets, waste coupling 32mm dia, CP pillar tap fancy type 15mm and waste pipe complete all as specified and directed.

Dismantling of water tanks capacity exc 250 ltrs and n.exc 500 ltrs and removing to store complete all as specified and directed.

S & F 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.Make-Sintex, Polywell, Rotax.

S&F in repair 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F Vireous china water closet squatting pan “Orrisa Pattern” white of size 580x440mm with internal foot rest with `P’ or `S’ trap for 100mm pipe (excluding flush pipe and flushing cistern) all as spd but fixed in repair. complete all as specified and directed.

S & F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed.

S & F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia pipe complete all as specified and as directed.

S&F in repair 15mm dia Bib tap standard of PTMT any colour screwed,for iron pipe and fixed.(Minimum weight 15mm - 90gms complete all as specified and directed.

S & F in repair stop valves / angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore pipe complete all as specified and as directed .

S&F in repair 15 mm bore concealed Stop stop cock fancy type screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.

S & F in repair tubular towel rail 20 mm dia D type brass chrormium plated 600 mm long between flanges complete all as specified and as directed.

S & F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug / waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460 mm with bowel size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs and Cill in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc Including brick work of jambs in CM 1:4 complete all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe 310-0) as in chowkaths, door and door frames, gates of angle frame work etc including purpose made hinges / tower bolt and handle etc. necessary welding etc complete all as specified and directed.

S & F 30 mm thick factory made flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed.

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorativetype wiremesh door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately).

M & L for PCC 1 : 3 : 6 type C-1 using 20 mm graded stone aggregate as in fixing of hold fast including necessary form work complete all as specifed and directed.

S & F mild steel flat iron as in hold fast and similar small articles conforming to Fe 290 Gde E 165 complete all as specified and directed.

S&F stainles steel butt hinges of size 100mm medium weight complete all as specified and directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded complete all as specified and directed.

S&F for Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with out glazing bars , dovetailed or welded complete all as specified and directed.

S & F MS work as in widnw guard bars, plain, let in and fixed independently in wooden frames etc, and similar articles conforming to Fe 290 Gde E 165 complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames glazed with putty of fixed with beads complete all as specified and directed.

S & F sheet glass ordinary quality 3 mm thick and glazing with oil putty or fixed with bead / glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed.

S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, wodden beads to steel windows/wodden doors.

S & F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or stainless wire staples, fixed in aluminium windows/vent.

S&F Aluminium anodised barrel tower bolts of extruded section of 200mm size etc complete all as specified and directed.

S&F 125mm hasp and staple, aluminium anodised, incl mils steel hinge pin including bolt to hinge plate and fixed with screws.

S&F Aluminium handles, cast type anodised of size 150mm etc complete all as specified and directed.

S&F 300 mm long Aluminium alloy. anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed.

M & L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed.

M & L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed.

Dismantling boarding as in kitchen cupboard, drawers, cupboard incl chowkhats etc. fixed in any position complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 6mm thick pre laminated moulded wall lining for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 6mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen cabinet, cupboard. The laminated shutter should be 10 mm deep mould on the pre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 12mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed.

S & F continous (piano) hinges, mild steel, bright finish or eletro galvanised width of flap (when opened) 30 mm etc complete all as specified and as direced.

S & F in repairs stainless steel decorative curtain rod of 25 mm bore with 1mm thick including brakets 02 nos finalie 02 nos) etc complete all as specified and as directed.

S & F in repairs chromium plated showe rose with shower arm complete all as specified an directed by Engineer - in - Charge.

M/S S P CONSTRUCTION

M/S SRI JAGDAMBE TRADERS

M/S WASEEM KHAN CONTRACTOR

M/s Moti Babu Agarwal