REPAIRS TO MANGLORE PATTERN ROOF AND WATER PROOFING TREATMENT IN D2 E3 AREA AND MES INSTALLATION OFFR MESS AND CERTAIN OTM ACCN IN ZONE A AREA AT NDA KHADAKWASLA

Amount

Dismantling of singel layer mangalor pattern tiles in roofing

Dismantling of battans for tiles of any size including tilting fillets spacing exc. 15 cm

Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work

Dismantling boarding, any description, fixed in any position with nails

Demolition of PCC block /stone boulder masonry built in cement mortar or cement lime mortar

M&L for taking down existing water proofing treatment of any description and layers from wall/roofs including screed bed or bedding layers of mortar, concrete in any position complete and cleaning the surfaces by grinder to make it smooth and even, free from dust and scrubbing down with water complete all as specified and clearing the premises all as directed (Note :- Cost of Disconnected , setting aside and refixing of water tank any capacity while taking down existing treatment deemeed to be included as no water supply to users hampered)

M&L 15 mm thick Plaster on RCC roof slab with CM ( 1:4 ) including water proofing compound @ 3% by weight of cement shall be caried out as specified and directed .(WPC paid seperatly).

M & L for preparing plastered surfaces , applying uniform coat of primer@ .25 Kg/Sqm and applying water proofing treatment on roof/ wall, edges and vertical surfaces, using 3 mm thick APP modified bitumen based prefabricated water proofing membrane reinforced with non woven polyster matt black finished weighing not less than 3.50 Kg/Sqm with torch application and 10 cm overlap both ways complete, further apply a coat of bituminious reflective alumium paint all as specified and directed

Supply only intergal water proofing compound

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as directed.

S/F 0.63mm thick galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with cranked hook bolts in roofs, walls etc with grade of zinc coating 275.

S/F for 0.63mm thick plain galvanised, mild steel sheeting as in ridge,hips,valley gutters ,drip and straight flashings class-2 with grade of zinc coating 275.

M&L for 2nd class H/W, 20 to 25 mm thick weather boarding clean sawn, rebated on thick edge to give 20 mm laps and fixed, all as specified and directed

All as per above item No 13 But except boarding

M&L for providing roof tiles Mangalore pattern interlocking at side joints, laid dry in patches where required all as specified and directed

All as per above item No 15. But except tiles

M&L for ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in cement mortar 1:6 all as specified and directed

All as per item ser No 17 here In before but except ridge tiles

M/L for IInd class hard wood in scantling exc 40 Scm in area clean sawn for unframed work

M/L for IInd class hard wood plain fillets section exc 13 Sqcm and b not exc 25 Sqcm ,square,rectungular or tringular in section ,clean sawn ,secured with nails or brads for unframed work

All as per Item No 19 above but fixing only for IInd class hard wood in scantling clean sawn for unframed work

M/L for 2nd class hard wood clean sawn battens at 30 cm centre, sectional area exc 5 & n.exc 15 sqcm

All as per item No.22 above but except battens

M&L for preparation surfaces of wood and wood based materials,new or old ,of any description and girth ,not otherwise described and treated with two coat of creosote.

M&L two coats of synthetic enamel painting to wooden surfaces over one coat of pink primer and including preparation of new surfaces on 10 cm width or girth of any description

M&L one coats of synthetic enamel painting to wooden surfaces including preparation of old surfaces on 10 cm width or girth of any description

Dismantling of ceiling boarding any description fixed in any position.

M & L for for false ceiling 5mm thick PVCpanesl (coloured / designe) including moulding of pattern as approved by GE on and including GI grid frame workconsisting grid & GI main tee 32 x 24mm,cross tee 25 x 24 mm and angle of walls of sizeof grid not less than 600 x 600mm hung from ceiling using 3mm GI wire suspendors spacers at 120cm c/c on main runners includingmaking nitches for light, fan decorative / concealed light fittings and fasteners if required complete all as specified and directed

M & L for 4mm thick non Asbestos cement plain sheet 600 x 600 for ceiling on and including anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 3.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm on RCC slopping, including two coats of White wash and preparation of surfaces.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L precast cement concrete block masonry exc. 10 cm width with solid block C5 Grade and setting in cement mortar (1:6) all as specified and as directed by

M&L for rendering 15mm thick cement plaster in CM( 1:4) on block walling surface finished even and smooth without using extra cement complete all as specified

M&L for preparation on newly plastered wall surface and appplying two coats of cement base paint complete all as spd and directed.

Dismantiling water tank exc 500 lit and not exc 1000 lit and removing to store.

Dismantiling water tank exc 1000 lit and not exc 2000 lit and removing to store.

S&F Rotational moulded polyethylene water storage 1000 litres tank (cylindrical vertical with closed top) three layared, ISI marked hoisted and fixed in position and Including 20 mm dia stop cock cast copper alloy and 20 mm dia PTMT float valves all as specified in SSR part I

S&F Rotational moulded polyethylene water storage 500 litres tank (cylindrical vertical with closed top) layared, ISI marked hoisted and fixed in position and Including 20 mm dia stop cock cast copper alloy and 20 mm dia brass float valves all as specified in SSR part I

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed

S&F 20 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).from 500 lit & n exc 1000 litres

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store all as specified and directed

S&F 15 mm bore tube medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for mild steel rolled section connected with each other with welding (angle,tee,channel, beam, hollow sections etc) as in main and cross beams, hip,verticle hollow sections and jack rafters, purlins where connected to common rafters and running rails where verticle sections are fixed in welded in wallsin wall surface with plates & other verticle sections are fixed in ground level embedded in concrete fixed and horizontal sections fixed in wall with bolt completly, fixed with angle cleats or other connecting plates conforming to GdeFe-410- W(Gde- E-250) quality- B complete all as specified and directed by Engg In charge.

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and directed.

S&F for pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa as in roof covering fixed with J-type or L-type or cranked hook bolts drilled with the screws and fixed in horizontal or verticle sections complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for

M&L for cement concrete Type B1, 1:2:4 (using 20 mm graded stone aggregate) as in foundation filling, coping and mass concrete all as specified and directed

Dismantling in fillets, rails, posts, rafers, purlins etc under 40 Sqcm in section and at any position as in unframed work

M/S CHANDAN BUILDERS

AMW Construction and developers

Sarkar Enterprises

Sunil Constructions

Prem Singh

PAWAN B SHINDE

Mehta and Co.

SHAH BUILDERS

M/S P D TUPE

M/S DEV ENTERPRISES