Providing and fixing of Chain link fencing in cement concrete blocks at Rongo-II of Nyoma Forest Range for the year 2024-25 under the scheme CAMPA

Amount

Earth work in excavation by means of (Hydraulic Excavator) over area exceeding 30cm in depth 1.5mtr in width as well as 10sqm on plane including disposal of excavated earth and lift up to 1.5 m disposal of earth to be leveled and neatly dressed. Lead upto 50m and lift upto 1.5m

Providing and laying in position cement concrete of specified grade including of centering and shuttering all work up to plinth level 1:3:6 (1 cement 3 fine sand 6 graded stone agg. 20mm nominal size) 1. Crushed in blocks.

Providing and fixing of fabricated angle iron fence post made of standard angle section 2.14 mtrs long with 15cm foot /toe at bottom with holes drilled and top bend

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns and for mass concrete

Providing and fixing of G.I chain link fabric fencing abric 4mm dia fence cold dip galvanised of required mesh size 10cm x 10 cm wire of (4x4) mesh, including strengthening/binding with 2mm dia wire out or nut bolts and washer as required completely.

providung and laying and strengthening of barbed wire at top of the fence post including all jobs

Supply at site angle iron posts and strand of required size including bottom to be split and bend at triangle in opposition direction of 10cm length and drill hook upto 10mm diaetc of complete job

providing and installation of fabric iron gates 6x12=1 Nos with an angle iron framed inckuding Master Pillars (6x6) with cutting hoisitng welding and all fitted and fixxture and all lead completely

Providing and installation of Febric gates 4x6 =1Nos with angle iron framed including master pillars (6x6) with cutting hoisting welding and all fitted and fixture and all lead completely

Providing and fixing MS Iron sheet 3 mm of required pattern for for sign board for main gate entrance with one coat of steel premier and two coats of paint including departmental logo and writing etc with cement concrete sizing (6x4) with 7.00' legs (50x50x6) =1Nos oncudling all jobs as directed by incharge.

Carriage of sand and stione agg. By mechanical Transport from source to working site for a distance of 10.00KM

Carraiage of cement by mechanical Transport from source to Nyoma by an average of 210.00 KM

Carriage of fencing materials by mechanical transport fromLeh to Rongo for an average of 210.00 KM

M/S THINLES ANGCHOK CONTRACTOR (BID ID -147150)

M/S YOKMA STEEL FABRICATION (BID ID -147109)

AJAZ HUSSAIN (BID ID -147134)

M/S SD FABRICATION (BID ID -147140)

M/S BALTOK WIRE AND NAIL MANUFACTURING (BID ID -147052)

M/S JARA STEEL FABRICATION (BID ID -147100)

M/S TSERING WANGYAL (BID ID -147129)