Supply of furniture for O/o the SE (MandP) Ajmer

Amount

Item Rate

Supply of computer table 4' x 2' x 2.5' having 19 mm thick PLT board and M. S. frame with four legs of 25 mm sq. pipe of 16 SWG with keyboard pullout rack and providing space for computer accessories and one drawer, complete as per sample approved by the Engineer-in-charge.

Supply of steel almirah 78"x36"x19" with four fixed shelves making five compartment with 22 SWG M.S. sheet and duly finished with spray painting with locking arrangment and front M.S sheet of 20 SWG with minimum 65 Kg weight, complete as per sample approved by the Engineer-in-charge

Supply of steel almirah 50"x30"x15" with three fix shelves making four compartments of 22 SWG M. S. sheet duly finished with spray painting with locking arrangement and front M. S. sheet of 20 SWG with minimum 35 kg. weight, complete as per sample approved by the Engineer-In-Charge.

Supply of steel racks, made of slotted angle 1.25" x 1.25" of 14 SWG M. S. sheet with three adjustable shelves making two compartments size 39”x36”x15”, shelves sheet having 20 SWG thickness and duly finished with spray paint having a minimum weight of 12 kg, complete as per sample approved by the Engineer-In-Charge.

Supply of steel racks made of slotted angle 1.25" x 1.25" of 14 SWG M. S. sheet with six adjustable shelves making five compartments, size 78”x36”x15”, shelves sheet having 20 SWG thickness and duly finished with spray paint having a minimum weight of 24 kg complete as per sample approved by the Engineer-in-charge.

Supply of three seater waiting chair with seat and back made of special perforated 20 gauge CR steel sheet with crome polished steel handles and 'Y' type steel frame. Base is supported over M.S. Pipe 3" x 1.25", 16 gauge with fittings of nuts and bolts complete. Size 152cm (L) x 46cm (W) x 85 cm (H) and seat height 46cm. All M.S. components shall be epoxy polyster powder coated with dry film thickness morethan 45 microns and pencil scratch hardness more than 2H, complete as per sample approved by the Engineer-in-charge.

Supply of 4'x2.5'x2.5' office table made of steel frame of 25mm square 16 SWG hollow pipe.The top frame is also made of 25mm hollow square pipe of 16 SWG size 113 cm x 56 cm, all frame painted with stove enamel paint. The right cabinet made out of L-36cm ,W-56cm, H-42cm single box having three drawer run on smooth strip with locking arrangement made out of 22 SWG CRC sheet and painted with stove enamel paint inside and outside as per directions of engineer incharge.For foot rest 15 cm above from ground level, one 25mm square 16 SWG hollow pipe is to be fixed. Table top 19mm thick PLT board of size 4' x 2.5' fixed on table top frame. Table top having teakwood beading 19 mm size on edge of board. The base of table legs fitted with plastic caps, complete as per sample approved by the Engineer-in-charge.

Supply of high back revolving chair with hydraulic/gas height adjustment, center tilting with locking mechanism, made of heavy M. S. base (chrome polished) with 5 wheel of approved quality and hydraulic push and back system. The seat and back cushion foam 32 density on hot pressed 12 mm thick ply, having arm rest with P. U. handles. Seat and back having cover of tepestry metty cloth/rexine/net of approved quality. Seat W-510 mm, D-480 mm and Back W-510 mm, H-550mm (approximate), complete as per sample approved by the Engineer-in-charge.

Supply of low back revolving chair with locking mechanism, made of heavy M. S. base (chrome polished ) with 5 wheel of approved quality and hydraulic push and back system. The seat and back cushion foam 32 density on hot pressed 12 mm thick ply having armrest with P.U handles. Seat and back having cover of tepestry metty cloth/rexine/net of approved quality.Seat W-510 mm, D-480 mm and Back W-510 mm, H-550mm (approximate), complete as per sample approved by the Engineer-in-charge.

Supply of visitor chair, made of CR capsule pipe 16 SWG . The seat and back cushion foam 32 density on hot pressed 12 mm thick ply, having arm rest with P. U. handles. Seat and back having cover of tepestry metty cloth/rexine/net of approved quality. Seat W-510 mm, D-480 mm and Back W-510 mm, H-550mm (approximate), complete as per sample approved by the Engineer-in-charge.

Supply of 5'x3'x2.5' officer table made of steel frame of 25mm square 16 SWG hollow pipe. The top frame is also made of 25mm hollow square pipe of 16 SWG size 132 cm x 56 cm, all frame painted with stove enamel paint. Left cabinet made of single box having two shelves with locking arrangement. The box size L-36 cm W- 56 cm and H- 42 cm made of 22 SWG CRC sheet, painted with stove enamel paint inside and outside. The right cabinet made out of L-36cm ,W-56cm, H-42cm single box having three drawer run on smooth strip with locking arrangement made out of 22 SWG CRC sheet and painted with stove enamel paint inside and outside as per directions of engineer incharge. For foot rest, 15 cm above from ground level, one 25mm square 16 SWG hollow pipe is to be fixed. Table top 19mm thick PLT board of size 5' x 3' fixed on table frame and having teakwood beading 19mm size on edge of board. The base of table legs fitted with plastic caps, complete as per sample approved by the Engineer-in-charge.

Supply of table side wooden rack made of 19 mm thick block board finished with 0.8 mm thick mica of size 3' x 1.5' x 2.5', having three slots on top and two open almirah shelves in front lower portion, complete as per sample approved by the Engineer-in-charge

vasuja wood works

Abhishek Industries