Construction of Village Secretariat Office Building at Tharuvai Village and Panchayat in Palayamkottai Panchayat Union

1) Construction of Village Secratriate Office Building at Tharuvai Village and Panchayat in Palayamkottai Panchayat Union

Earthwork excavation in all classes of Soils and Sub soils except hard rock requiring blasting including initial lead and lift, dressing the excavation upto bed level for Foundation as SS 20 B specification etc., complete

Supplying and filling in foundation basement etc., wih filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc.,complete complying with standard specification and as directed by the departmental officers

Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete

Refilling the basement with excavated earth other than Sand complying the Standard specification

Brick work in cement mortar 1:5 mix using country bricks 83/4"x4 1/4"x2 3/4" and conveyance of all materials to site and all labour charges etc complete. For BASEMENT

FOR SUPER STRUCTURE

Supply and erecting centering for sides & soffits including supports and strutting up to 3.29m height for plane surface in all floors with cross bracing using mild steel sheets of size90cmx60cm and 10 gauge stiffened weled with mild steel angles of size 25mm x 25mm x3mm for boarding laid over country wood poists of size 10cm x 6.5 cm dia spaced at about 90 cm center to center etc., complete complying with std.Specifications and as directed. For BELOW BASEMENT

For ABOVE BASEMENT

Supply ,Fabricating and placing in position of mild steel or ribbed for steel rods and all RCCworks as per the design given including cost ofsteel and binding wire in all floors etc., & conveyance of Steel as per Std.Specification etc., completet complying with std.,Specification and as Directed

Reinforced cement concrete 1:1/2:3 mix using 20mm ISS HBG Metal for RCC items of works excluding cost of reinforcement and fabrication chages and centering and shuttering charges but including curing providing fixtures like fan clamps in the RCC floor or roof level wherever necessary and bearing surfaces of walls,sides and bottom of slab,beamsetc., complete. FOR BELOW BASEMENT

For ABOVE BASEMENT

Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete.

Plastering with cement mortar 1:5 mix to 12 mm thick includingcost and conveyance of all materials to site and all labourcharges etc complete

Paving the floor with best quality Vetrified (Such as Morbonite) Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three Sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.

Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm ISS metal to 25mm thick including cost and conveyance of all materials to site and all labour charges for mixing, laying, curing etc complete

Paving the floor with special type of flooring tiles(Cement based Hydraulically pressed Anti skied tiles(20mm tick)in CM 1:3,20 mm thick

Dadooing of walls with white glazed tiles of size 15cmx15cmx6 mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Fabrication and supply of Mild Steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door D Size (0.90m X2.10m)

Door D1 SIZE (0.75m X1.80m)

Door D2 SIZE (1.10m X2.10m)

Fabrication and supply of Mild Steel Window of any size with single leaf outer frame,mullion section made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Steel window W1 Size (0.90m X1.30m)

Steel window W2 Size (1.20m X1.30m)

N Type Ventilator V Size (0.60M x 0.45m )

N Type Ventilator V Size (0.90M x 0.60m )

Rolling Shutter size (1.80m x 2.10m )

Supply and Fixing of Collapsible gate including all labour charges

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc complete.

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over New iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete

Supplying and fixing in Position European type water Closet of best Quality and approved make with 100 mm "p" or "s" trpe with double flapped rigit P.V.C Seat Flushing (SOR M-0647)

Supply and fixing in Postion Ordinary colour glazed indian type water closet quality and approved make with 100mm "p" or "s" trap with double flapped right P.V.C Seat level flusing etc.,

Supply and fixing of CI Manhole 60x60 cum (Heavy Duty)with cover and frame for septic tank manhole in position

Supply and Fixing of Cuddapah slab of 20mm thick for Shelf arrangements including cost and conveyance of all materials to site and all labour charges etc., complete

Supplying and fixing P.V.C rain water down fall pipe 110mm dia with necesaary shoes,bends & clamps etc.,

Provision for Galvinised color sheet- Verandah/ Sitout

Labour charges for fixing door along with frames in position etc., complete

Labour charges for fixing window and ventilators along with frames in position etc., complete etc., complete

Provision for wash basin

Provision for pvc nahini trap

Provision for pillar tap

Provision for angle Cock (SOR M-0529)

Provision for angle cock two way

Provision for Grab bar diabled Person Toilet

Provision for closed wooden Shelf/Rack arrangement with locker using Commercial BWP/BWR plywood of 19mm thick with 0.5mm laminate sheet on bothsides including accessories like hinses door handle etc (SOR M0390)

Provision for TactileF!ooring Fcr Disabled person

Supply and delivery of 1000lit. Capacity HDPE tank As per IS 12701/1996

Supply and delivery of 32mm PVC pipe etc. complete.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 64

Supply and run of 2 X 1.5 sq.mm (22 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69

Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84

Supply and fixing of CFL bulb Fancy glass shade and 15W LED SD 80

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 110

SD 114 300mm exhaust fan

Supplyandfixingof3Nos.5A(3pinand2pin)combinedflushtypewallsocketwithcontrolswitchesconcealedinsuitable TW box covered with hylem sheet in flush with wall with earth connection (for computer plug socket) SD 142

Supply and fixing of TNEB Meter board SD 125

Supply and fixing of PWD EARTHING SD234

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}