MP31FTN012/Ratlam

MPRRDA,PIU-Ratlam

Bill of Quantity

Details for the Percentage(%) Rate Tender

Based on SSR 01-01-2024

District :- Ratlam PIU :PIU-Ratlam, Package No. :- MP31FTN012

Total Road Length

PART-I (IR)

Alote barod to bhim

Jaora Tal Road to Dhudhiya

Gogapur Nagda Road to Minawada

Alote Talod road to Dabriya

Dharola to Guradiya

Alote patan Road to Nipaniya Rajguru

Alote Kanadiya road to Thuria

Alote to Arwaliya Bhama

Materials

Backfilling in Foundation Trenches as per drawing and technical specification Clause 1101.8-Sand filling

Alote Thuria Road to Bajpur

Alote Thuria Road to Munj

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs

Part-III (Renewal)

20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder :- Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm size @ 0.18 cum per 10 sqm & 11.2 mm size @ 0.09 cum per 10 sqm aggregates using penetration grade/modified bitumen @ 14.6 kg/10sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A , Type B or Type C as per Technical Specification Clause 508. (II) Bitumen (VG-30)

Seal Coat :- Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510. Case - II : Type B (II) Bitumen (VG-30)

3 % for Extra widening at curves and CDs