P L AND C OF BITUMINOUS READY MIX FOR 40 MM BC WK, 50 MM BM, TACK COAT AND RD MARKING BETWEEN KM -3.00 TO KM 6.860 NET LENGTH 3.926 KM ON RD MEKA-ROING-HUNLI UNDER 62 RCC/752 BRTF UNDER PROJECT UDAYAK

Amount

Providing, laying and compaction of Bituminous Concrete, Tack coat and correction works with BM for resurfacing works including road marking with thermoplastic paint complete in all respect all as specified and directed by Engineer-In-Charge/OC Contract

Providing, laying and compaction of 40 mm thick BC (Bituminous Concrete) layer including preparation of existing surface, with pre-coated stone chips grading confirming to Table:500-17 and aggregates satisfying the physical requirement of Table 500-16 of MORT&H specifications of Road and bridge works (Fifth Revision) mixed with minimum 5.6% bitumen VG-30 (Viscosity Grade-30) by weight of total mix and 2% filler by weight of mix all as specified as per MoRT&H Specifications (Fifth Revision)

Providing, laying and compaction of 50 mm thick BM (Bituminous Macadam) for correction works with precoated stone chips grading confirming to Table:500-7 and aggregates satisfying the physical requirement of Table 500-6 of MORT&H Specifications for Road and Bridge Works (Fifth revision) mixed with 3.6% VG-30 (Viscosity Grade) bitumen by mass of total mix and rolled /compacted as per MoRT&H Specifications (Fifth Revision)

Providing and applying Tack Coat with bitumen emulsion using emulsion pressure distributor @ 2.5 Kg/10 Sqm (RS-1 grade) or using low viscosity grade paving bitumen of VG-10 grade using bitumen pressure distributer or Bitumen Emulsion as directed by Engineer In Charge on prepared bituminous/granular surface cleaned with mechanical broom, all complete as per clause 503 of MoRT&H Specifications (Fifth Revision).

Providing and applying Road marking with thermoplastic paint (2.5 mm thick) conforming to MoRT&H Specifications (Fifth Revision): Clause 803.4

M/s. GRRB ASSOCIATES

Vinay Bhardwaj