Construction of 32 No Piezometers in various Blocks of Districts Sitapur Hardoi Lakheempur Lucknow Raibareli

Installation of piezometer

Transportation of DC/DTH Rig Machine including cost of all labour etc. complete.

Water supply charges for drilling work.

Drilling of 200 mm bore well by DC Rig Machine including cost of labour, equipment, etc. complete required for proper completion for work (for alluvial regions).

Providing of 100mm dia CS/CM Casing pipe (confirming IS:12818) assembly

Providing of 100mm dia CS/CM Ribbed Screen (confirming IS:12818) assembly.

Lowering of 100 mm dia PVC Assembly including cost of labour etc. complete.

Providing & fixing of 100 mm dia. threaded PVC end cap.

Providing & fixing of 150 mm dia. of MS pipe (confirming IS:1239)

Providing & fixing MS Clamp for holding of MS Pipe.

Providing & fixing of MS square plate of size 200X200 mm & thickness 6 mm including 4 no. fastener.

Providing & filling of Pea Gravel of size 2mm to 4mm dia. into bore well including cost of labour, material etc. required for proper completion of work.

Development of bore well by 3 HP submersible pump including cost of labour, material, etc. required for proper completion of work.

Earth work in excavation in trenches for foundation in ordinary soil (Loam, Clay or Sand) including lift up to 1.50 Mt and lead up to 50 Mt.

Providing & laying cement concrete of 1.5mX1.5mX0.15m below CC block in ratio 1:4:8 (1 cement: 4 coarse sand (zone III): 8 graded stone aggregate 40mm nominal size) with ramming & dressing etc. complete work with all material, labour, T&P as required.

Providing & laying cement concrete block in ratio 1:2:4 (1 cement: 2 coarse sand: 4 graded stone ballast 20mm nominal size) as per Drawing, Design and site requirement including all materials, labour and T&P etc. required for proper completion of work.

Fabrication & fixing of security system as per design including cost of material, labour, etc. required for proper completion of work.

Fabrication and supply of angle iron sign board of frame size 1.20x0.90x1.95m with cross strips and beading of size 30x4mm welded on frame of MS angle size 40x40x5mm and M.S. sheet of 18 gauge as per drawing and design including all labour, material and T&P etc. complete.

Fixing of legs of sign board on cement concrete block of size 0.30x0.30x0.60m in ration 1:3:6 as per drawing and design including all labour, material, etc. complete.

Painting of angle iron sign board with double coat primer and enamel paint of black colour on frame both side and sky blue on M.S. sheet both side including all labour, material, etc. complete.

Writing on angle iron sign board both sides of given matter with Post Office Red Colour Fluorescent Paint as per drawing and detail given including all labour, material, etc. complete.

Loading/unlading & transportation of material, T&P including all labour etc. complete.

Tentage charges.

Reduce Level Survey work of fixing of Latitude, Longitude including all labour, T&P etc. as required.