Proposed construction of Staircase and providing new RCC roof, after dismantling the damaged RCC roof and lintel ( above lintel level ) at Unit Office no.12, Maharajanagar in ward no. 39 of Palay Zone, Tirunelveli City Municipal Corporation

Earth work excavating and depositing on bank with an intial lead of 10m & intial lift of 2m in sand, slit or other loose soil, wet sand or slit not under water, light black cotton soil sandy loam and ordinary soil including excavated earth as standard specification SS 20 B including refilling charges etc complete., complying with standard specification

Cement concrete of mix 1:4:8 (one cement, four sand and eight aggreate) using 40mm ISS HBG metal from approved quarry including all cost and conveneyance of materials to site and all labour charges etc., complying with standard specification.

Providing steel centering for sides and soffits of cement concrete works including necessary strutting arrangements for plain surfaces in foundation and basement for drainage and retaining walls without props with all cost and conveyance of materials and labor charges etc., complete complying with standard specification

Providing steel centering for sides and soffits of cement concrete works including necessary strutting arrangements for plain surfaces in foundation and basement for drainage and retaining walls with props with all cost and conveyance of materials and labor charges etc., complete complying with standard specification

RCC COLUMN & SUNSHADE

SLAB, BEAM & LINTEL

Reinforced cement concrete 1 : 11/2 : 3 ( one cement, one & a half sand and three jelly ) using 20m ISS HBG metal from aproved quarry and all cost of materials for all RCC works with all cost and conveneyance of materials and labour charges etc., complete complying with standard specification

FOUNDATION AND BASEMENT

GROUND FLOOR

Supplying fabricating and placing in position of R.T.S rods including cutting, bending, straightening of rods and tying the reinforcement with necessary binding wire including all cost and conveneyance of materials to site and all labour cost etc., complete complying with standard specification

Paving the floor with Vitrified tiles of size 600mm x 600mm x 8mm in cement mortar 1:3, 20mm thick with all cost and conveneyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using at the rate of 0.40kg/sq m including finishing the joint neatly and pointing flush with tile surface etc complete complying with standard specification.

Paving the floor with anti skid ceramic tiles scratch proof design of 6mm thick in cement mortar 1:3, 20mm thick with all cost and conveneyance of materials etc., for flooring of self designed grooves and both way special colour tile of best quality and pointing with white cement using at the rate of 0.40kg/sq m including finishing the joint neatly and pointing flush with tile surface etc complete complying with standard specification

Dadooring the walls with colour glazed tiles of 6mm thick in various colour set in cement mortar 1:2, 10mm thick and pointed with white cement @ 0.4kg/m2 in all floors as directed etc., complete complying with standard specification

Brick work in cement mortar 1:5 mix using Fly Ash Bricks of size 230 x 110 x 75mm from approved quarry including cost and and conveyance of materials to site and all labour charges etc., complete as per standard specifications

GROUND FLOOR

Fabricating, supply and fixing in position of MS doors with single or double leaf , windows and ventilators using MS angle as outer frame, shutter frame and intermediate stiffner covered with M.S. sheet with necessary hinges, tower bolts, aldrop and hold fast complete with one coat of red oxide primer including all cost of materials and labor charges for fixing in position and conveyance cost etc., complete complying with standard specification

Plastering with cement mortar 1:3 mix, 10mm thick with all cost and conveyance of materials and all labour charges etc., complete complying with standard specification

Plastering with cement mortar 1:5 mix, 12mm thick with all cost and conveyance of materials and all labour charges etc., complete complying with standard specification

Painting two coats with ready mixed enamel paint of approved colour and quality including priming coat over new iron works etc.,complete complying with standard specification

Painting two coats with ready mixed enamel paint of approved colour and quality including priming coat over old iron works etc.,complete complying with standard specification

Painting the walls two coats with approved interior and exterior emulsion of first quality over cement plasterd wall surfaces, celling and other new or old surfaces over one coat of primer using cement paint primer including cleaning the surface and painting with primer , etc. complete complying with standard specification. ( The colour and shade of the emulsion shall be got approved by corporation officers before use on works)

Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator) ( SD 23 )

Supply and fixing of 32A DP MCB ISOLATOR including all cost of materials and hire charges for tools and plants, labour charges for fixing in position etc. complete as directed by corporation officers ( data attached )

Supply and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp. ( SD 110 )

Supply and fixing of 20W 4' LED light fitting complete with round blocks on wall or ceiling with pvc unsheathed copper leads from terminals to the fitting ( data attached )

Wiring with 2 x 1.5sqmm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories, in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick Hylem sheet cover for 5 A 3 pin non inter locking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. ( SD 38 )

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains (SD 65)

Supply and fixing of TNEB meter board suitable for 32A three phase service connection with 3 No's 32A fuse unit (500V) 32A neutral link and earth link (1"x1/8"copper flat) on TW plank of size 600mmx450mmx19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20PVC insulated copper wire from EB meter to fuse unit ( SD 125 )

Supply and fixing of 3 phase 32A aerial fuse unit 3Nos. (500V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (SD 135)

Supply and fixing of copper wire for earth connection including all cost of materials and labour cost etc., complete (LMR)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry ( SD 221 )

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 15A 3 pin flush type non inter locking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for concealed power plug point ( SD 40 )

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm GI pipe (Class "B") suitably bent at both ends with necessary angle upright and end supports for main ( SD 70 )

Supplying and fixing of 18" size orya type colour indian water closet with new glazed earthern ware type of aproved quality with p or s trap with sand cushion and forming ,flooring all-round the water closet using 40mm size broken with jelly in ration of in cement concrete 1:2:4 (one cement,two sand four aggreate) of 4" thick and plastering with cement mortar 1:3 (one cement and three sand) mix 20 mm thick using river sand including fixing the water closet in postion and giving necessary connection etc.,complete complying with standard specification

Supplying and fixing in position best quality approved make colour glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape, 32 mm diametre C.P. wate, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supply of the following pipes and specials for water supply and sanitary works etc.,

3/4" PVC pipe - M-0876

3/4" PVC Coupler - M-0881

3/4" PVC elbow - M-0887

3/4" PVC tee - M-0899

3/4" PVC MTA - LMR

1" PVC pipe - M-0877

1" PVC Coupler - M-0882

1" PVC elbow - M-0888

1" PVC tee - M-0900

1" PVC MTA - LMR

3/4" ball valve - LMR

1" ball valve - LMR

Brass Chromium Plated Screw Down Tap 15 / 12mm dia (Heavy Type) - M-0508

75mm 4kg/sqcm PVC air vent pipe - M-0862

75mm PVC cowl - M-0603

110mm 6kg/sqcm PVC pipe - M-0871

110mm PVC Door Elbow - M-0945

110mm PVC Bend - M-0961

110mm Shoe - M-1037

Shellac - M-0518

Thread ball - M-0527

PVC Adhesive (Solution) - M-0519

PVC Water Tank - M-0540

Supplying and fixing best approved quality C.P / Al anodised Towel rail 600mm. long and 20mm diameter with brackets of same material including cost of teak-wood plugs and C.P. screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P. soap tray of size 150mm X 100mm including cost of teak wood plugs, brass screws complete complying with standard specifications.

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 x 450mm with necessary plastic back. PVC frame with bottom stand of approved colour with brass screws, rawalplug etc., complete.

Labour charges for fixing the supplied water supply and sanitary materials including laying and jointing of PVC pipe and specials on wall and 0.45m below ground level but excluding cost of pipe and specials as directed by the corporation officers etc., complete.

3/4" PVC pipe

1" PVC pipe

110mm PVC pipe

Lettering and painting of size 8' x 3' including all cost of materials and labour charges and conveyance cost etc., complete as directed by Corporation officers - LMR

Providing black granite tablet stone of size 4' x 2' , 18mm thick and engraving the Tamil / English letters as directed by Corporation officers - LMR

Dismantling the damaged pressed tiles and weathering course including all cost of labour charges and necessary hire charges for tools & plants etc.,complete. - W-0037 ( add 5% )

Dismantling the existing damaged wooden door & window including all cost of labour charges and necessary tools and plants etc., complete. - W-0029 ( add 5% )

Dismantling the existing damaged Aluminium partitions including all cost of labour charges and necessary hire charges for tools & plants etc.,complete. ( add 5% )

Carpenter - II Class - L-0063

Mazdoor - I - L-0106

Dismantling the existing brick work in cement mortar including all cost of labour charges and tools & plants etc., complete. -W-0015 ( add 5% )

Dismantling the existing damaged RCC works including all cost of labour charges and necessary hire charges for tools & plants etc.,complete. - W-0035 ( add 5% )

Dismantling the existing damaged P.C.C. including all cost of labour charges and necessary hire charges for tools & plants etc.,complete. - W-0034 ( add 5% )

Dismantling the damaged floor tiles including all cost of labour charges and necessary hire charges for tools & plants etc.,complete. - W-0042 ( add 5% )

Removing the debries and transporting the same by using hire lorry / Tractor including loading , unloading and transportation including all cost of fuel labour salary etc., complete as directed by the corporation officers. ( LMR )

Labour charges for shifting the EB meter arrangements and elecrtical fittings like ceiling fans , tubelight fittings etc., ( add 5% )

Electrical Maistry - L-0058

Wireman Grade-II / Electrician Grade-II - L-0054

EB charges for shifting the EB meter etc.