Repair Replacement of roofing sheet, flase ceiling, leakage, seepage and water proofing treatment and other misc Bldg wk at RMS Dholpur

Amount

Demolitiion of brick work/stone boulder masonary, built in cement mortar or cement lime mortar including all quions arches,pillars etc but excluding ashlar facings,dressed stone work and precast concrete but exceeding ashlar facingdressed stone work and precast concrete articles complete all as specified and as directed by enginere in Charge

M&L for taking down cenment plaster of any description including racking out joints, hacking for kay scrubing down with water etc complete all as specified and as directed by enginere in Charge

M&L for rendering 15 mm thick on stone masonary surfaces or surfaces other than fair face of brick work or on one side of lathing in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed by enginere in Charge

M&L rendering 5mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceilling surfaces complete all as specified.

M&L for rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even on edges/ Chajjas/Roof projection and simlar courses etc. complete all as specified and as directed by enginere in Charge

M&L preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over 3 mm wall care putty on surfaces of wall complete all as specified.

M & L preparation of newly plastered surfaces and applying three coats of white wash in ceiling complete all as specified and as directed by enginere in Charge

M&L for 2 coats of cement base painting on newly plastered surfaces of wall over a coat of white wash incl preparation of surfaces complete all as specified and as directed by enginere in Charge

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6 complete all as specified and as directed by enginere in Charge

M&L for walling of random rubble, uncoursed well bonded bedded, and solidily hearted, built in cement mortar 1:6.but except stone complete all as specified and as directed by enginere in Charge

Extra over stone walling for hammer dressing to face stones and dressing,of face beds and joints, as specified, of random rubble walling uncoursed or brought up to courses with maximum depression on face from straight edge held against the dressed surface n. exc. 40 mm, on lime or sand stones complete all as specified and as directed by enginere in Charge

M&L for plain cement concrete type B1 1:2:4 (20 mm graded aggregate) as in lintels upto 1.5 m clear sp and other similar bands, plinth courses, string courses,parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates, water troughs and the like including weathering, slightly rounded or chamfered anglesand throating, complete all as specified and as directed by enginere in Charge

Roughning surfaces of old concrete floor by picking , sweeping , clean and washing down with water to remove dust etc including brushing neat cement slurry with 3.00 Kg of cement per Sqm complete all as specified and as directed by enginere in Charge

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. Disconnecting existing tanks, exc 250 ltr not exc 1500 ltr setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and as directed by enginere in Charge

M&L for screed bed or bedding layer 15 mm thick in cement mortar 1:4 mixed with water proofing liquid as per manufactur’s direction, finished even and smooth without using extra cement mixed with water proofing compund all as specified and directed by Engr-in- Charge.

Supply only water proofing compound ISI marked Make : DR Fixit) complete all as specified and as directed by enginere in Charge

M&L APP based polymeric membrane not less than 3mm thick , weighing not less than 3.5 Kg / sqm , and upper side of membrane thermally insulated with white mineral gravel finish , informly embedded during manufacturing process,shall only be used . Itshall be laid by torch application .Side over laps shall be 75 mm and the end shall be 100 mm and all overlaps and joints shall be sealed by torch application including applying a coat of cold applied bitumen primer conferming IS:3384 @0.40 Kg/Sqm and applying hot blown bitumen spread per 3 Kg/sqm complete all as specified and as directed by enginere in Charge

M&L for cutting grooves in stone walls 75 mm wide and 65 mm deep and shaping horizontal face of groove with cement mortar 1:3 all as sdirected.

M&L for providing PCC (1:2:4) type B0 12.5 mm graded stone aggregate as in roof kerbs rounded or chamfered on edges complete all as specified and as directed by enginere in Charge

S&F in repair rotational moulded plyethylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 25x3mm and necessory fittings and incl dismantling complete all as specified and as directed by enginere in Charge

S&F in repair rotational moulded plyethylene water storage tanks 750 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including locking arrangement for cover using MS flat 25x3mm and necessory fittingsand incl dismantling complete all as specified and as directed by enginere in Charge

Takind down GI tubing of 15 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed by enginere in Charge

Takind down GI tubing of 20 mm dia and connection and incl cleaning for refixing or removel complete all as specified and as directed by enginere in Charge

S&F 15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors. complete all as specified and as directed by enginere in Charge

S&F 20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors. complete all as specified and as directed by enginere in Charge

S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. complete all as specified and as directed by enginere in Charge

S&F in repair Ball brass valves 20mm, high pressure,with polyethene float and fly nut complete screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed by enginere in Charge

Dismantling wrought iron or Mild stell work of any description not otherwise provided for complete all as specified and as directed by enginere in Charge

Dismantling of plain or corrugated steel sheeting any gauge, thickness, from roof coverings etc complete complete all as specified and as directed by enginere in Charge

Dismantling of Asbestos cement (corrugated, semi corrugated etc,) sheets in roof coverings etc complete all as specified and as directed by enginere in Charge

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, molding / folding in circular / semicircular of any position and height fixed with self tapping screws as specified, as directed by Engr-in-charge

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls Fixed with L-type or J-type or cranked hook boltsetc all as specified and directed by Engr-in- Charge.

Supply and fixing mild steel rolled sections such as angles etc. As in main and cross beam, hip and jack rafters,purlins where connected to common rafters and running rails and guides for sliding dorrs, fixed with angle cleats or other connected plates confirming to grad Fe 290 (Gde E-165) complete all as specified

M&L for repairing the edge / corner of Chajja / roof projection of Ground and First Floor and similar work by removing plaster width / girth exc 200 mm but not exceeding 300 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified.

Dismantling ceiling and wall boards or insulation board any thickness including cover fillets complete all as specified and as directed by enginere in Charge

M&L 12 mm thick designer ceiling tiles of 595mm x595 mm (Make : Everest or equivalent as approved by GE) in ceiling fixed with screw as per manufactures instructions, fixed with white powder coated galvanized iron grid with 24mm wide T-section exposed flanges comprising of main runner made from 0.33mm thick galvanized steel sheet & of size T 24x32mm and spaced at 1.2m c/c securely fixed to the structural soffits by hangers at 1.2m of GI wire 4mm dia fixed rawl plug, level adjusters and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall flush fitting of 1200mm long cross tee with (double stitching) to be inter locked between main runners at 600mm c/c to form 600x600mm modules, angle along perimeter wall shall be of 0.45mm thick galvanized steel of size 19x19mm of white colour all as per instruction complete all as specified & directed.

S & F in repair 4 mm Plain mild steel wire, galvanised class 3 in detached work such as for mosquito nets, cloth line and fixing to straining bolts, hooks, eyes, etc. including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. as directed (each line of wire to be measured)

S & F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, cutting/drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required

Taking down eaves gutter and rain water pipes (any size or pattern) including all fittings, heads, shoes,bends,swan-necks etc including cleaning or refixing or romoval to store. complete all as specified and as directed by enginere in Charge

S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps all as specified and directed . Make : Supreme/ Finolex.

S & F Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

Demolition of cement concrete (reinforced) roofs,floors (other than ground floor) , beam, staircase, landings,chajjas and similar suspende work and removing unserviceable material exc 100 mtr complete all as specified and as directed by enginere in Charge .(Reinforcemnet cut as required to facilitate demolition)

M & L reinforced cement concrete 1:2:4 (20 mm graded aggregate) type B1 nominal mix as in slab supported on ;walls,beams and column in floor,roof,landings,balconies, canopies,deck slab or as in shelves and chajjas etc all as specified.

M & L for mild steel 10mm dia, and over deformed bars cut to length bent to shape as required including cranking bending with MS steel wire not less than 0.9 mm dia complete all as specified and as directed by enginere in Charge

All as per srf item No 44 here-in-before but 8 mm dia complete all as specified and as directed by enginere in Charge

Use and waist for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizontal or slopping) rough finished flat surfaces complete all as specified and as directed by enginere in Charge

M/S RAJESH MISHRA