REPAIR TO CHAJJA, FACIA ,LEAKAGE, SEEPAGE AND MISC B/R WORK TO OTM AND MD ACCN IN ZONE-I OF AGE B/R-III UNDER GE(SOUTH) MEERUT CANTT

Amount

Demolition of Cement concrete (Unreinforced) in ground floor and pavings n exc. 15 cm thick (above of below GL) complete all as specified

Material & labour for 50mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in flooring, etc finished the surface even & fair complete all as specified and directed.

Material & labour for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in plinth protection, path etc finished the surface even & fair complete all as specified

Supply and fix mild steel joist, channel, angle, or tee sections fixed independently without connecting plates for chajjas and door frames complete all as specified and directed.

Supply and fix 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in chajja, roof, wall including demolition of old chajja etc complete all as specified and directed.

Dismantling asbestos cement (Corrugated or semi corrugated) sheets in roof covering complete all as specified and directed.

Dismantling timber scantiling 40 Sqcm and over in section in any position complete all as specified and directed.

Material & labour for fiber sheet cement 6mm thick corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed .

Material & labour for fibre sheet cement 6mm thick two place adjustable serrated ridge for corrugated or semi corrugated sheets fixed in roofs with J or L hooks including bitumen washer complete all as specified & directed .

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated sheet sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling structural steel work including doors gates in any position complete all as specified and directed.

Material & labour for repair to overhang portion of chajja, facia, dropwall etc for continuous work by providing PCC(1:2:4) type B-0 and finishing with CM 1:3 after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish, (Height of work to be considered up to 4mtr from FFL of ground floor) Note:- Where reinforcement is required to be provided will be paid seperatelly under relevent items ).

Material & labour for repair to overhang portion of chajja, facia, dropwall, canopy porch, prarapet, wall or similer location etc for discontinuos work by providing PCC(1:2:4) type B-0 and finishing with CM 1:3 after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish. area of work to be exc 0.1 Sqm but not 1.00 Sqm Each) Note:- Where reinforcement is required to be provided will be paid seperatelly under relevent items ).

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each and removing from site complete all as specified and directed.

All as per item No 15 above but area n.exc 1.5 Sqm Each complete all as specified and directed.

Taking down shutter of any description area exc.1 Sqm but n.exc 2 Sqm each and removing from site complete all as specified and directed.

All as per item No 17 above but area n.exc 1.0 Sqm Each complete all as specified and directed.

Supply and fix 30mm thick flush shutter solid core construction with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood plain, framed panelled shutters (Any number of panels) with panells of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneers complete all as specified and directed.

Supply & fix 35mm thick 2nd class hard wood glazed skelton shutters, open rebated, prepared to receive glass, gauze etc, without sash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, guage etc sizes of members of shutters as specified in SSR Part-I section 8, clause 8.24 (a) ,supplied and fitted to chowkhats complete all as specified and directed.

Supply and fix 125mm size aluminium alloy handles, febricated type extruded section, ISI marked complete all as specified and directed.

Suppy and fixing for 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.

Suply & Fix 125mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts complete all as specified and directed.

Supply and fix 100mm size aluminium anodised hasp & staple safety type and fixing bolts to hinge plate fixed with screws all as specified.

Supply and fix in repair 150mm long for floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed on floor complete all as specified and directed.

Supply and fix continuous piano hinges, mild steel bright finish or electro galvanised width of flaps 30mm when open complete all as specified and directed.

Material & labour for 18/19 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed including 1mm PVC lipping on all exposed edges including taking down old worn out boarding of any description complete all as specified & directed

Supply & fix steel ventilators with top/side hung shutters including hinges, steel peg stay and incl taking down old one complete all as specified & directed.

Material & labour for factory made steel window box type using ERW 'P' section comprising double frame for gauged and glazed skelton shutter jointed internallynwith flat iron 40x3mm complete including hinges, handle tower bolts stops, lugs etc all as shown on drawing Note (i) for the purpose of measurement & payment double shutter with frame shall be considered as on unit (ii) Unit required quoted against this item shall also inclued the iron mongry as required (iii) Guard bars glazing & wire mesh shall however be measured & paid for separately under respective items of Sch 'A' complete all as specified and directed.

Hacking out old broken glasses (any thickness) size quality or description from wooden/steel frams, glazed with putty or fixed with beads complete all as specified & directed.

Material & labour for 3 mm thick sheet glass, ordinary quality glazing with oil putty / beads in square area n.exc. 0.5 sqm in each pane all as specified & directed.

Supply & fix in galvanised steel wire wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

All as per item No 33 above but fixed in repairs complete all as specified and directed.

Material and labour for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per specification & drawing on page No 178 of SSR part-II ( 2020) complete all as specified and directed .

Material & Labour for factory made solid panel PVC wood grain printed door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottem rail paneling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined togethers with solvent cement suppling & fixing at site as per specification & drawing on page No 174 of SSR part-II ( 2020) complete all as specified and directed

Supply & fix butt hinges stainless steel 100mm with screw complete all as specified and directed

Supply & fix mild steel butt hinges medium weight colled rolled, 100mm size with screw complete all as specified and directed.

Supply and fix in repair magnet catcher suitable for cupboard shutter complete all as specified and directed.

Taking down cement or cement lime plaster any description from brick or stone walls/ceiling, etc including racking out joints, hacking for key, scrbbing down with water complete all as specified and directed.

Material and labour for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces and finished surface even and smooth complete all as specified and as directed .

Material and labour for rendering 5mm thick in CM 1:4 on ceiling and finished surface even and smooth complete all as specified and as directed .

Material and labour for preparing of newly plastered surface of wall and and applying three coats of white wash complete all as specified and directed.

All as per item No 43 above but three coats white wash on ceiling complete all as specified and directed.

Material & labour for complete removal of existing treatment of walls and applying wall care putty to make surface even and smooth complete all as specified & directed .

Materials & labour for preparation of old plastered surface of walls and applying two coats of oil bound distemper complete all as specified and directed.

Materials & labour for preparation of old plastered surface of walls and applying one coat of oil bound distemper complete all as specified and directed.

Materials & labour preparation of old plastered or unplastered surface of walls and applying one coat of white wash on wall complete all as specified and directed.

Material & labour for for prepration of old plastered or unplastered surface of walls and applying one coat of white wash on ceiling complete all as specified and directed.

Material & labour for for prepration of old plastered or unplastered surface of walls and applying one coat of cement base paint complete all as specified and directed.

Material and labour for preparation of new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces complete all as specified and directed .

Material and labour for preparation of old painted surface of wood and wood based materials of any description over 10cm width or girth and applying one synthetic enamel paint complete all as specified and directed .

All as per item No 52 above but on steel surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Supply and fix non skid glazed ceramic tiles(any shade) of size 400mmx400mmx7mm to 8mm thick set and jointed in neat cement slurry , pointed in white or coloured cement to match as in floor including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply & fix Light shade vitrified tiles coloured superior quality 600mm x 600mm x 8 to 10mm thick as on floor/skirting etc set and jointed with favimate/ball endure adhesive and joints grouted including 10mm thick screed in CM 1:4 and all as per manufacturer's instruction complete all as specified and directed.

All as per serial No. 56 here-in-before but in skirting / dado laid over and including 10 mm thick screed bed CM1:6 complete all as specified and directed.

Material & labour for coloured glazed ceramic tiles of approved shade of size 450mm x300 mm x 7 to 8 mm thick laid in Dado etc set and jointed in white or coloured cement to match the existing surfaces laid over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Material & Labour for 10mm to 12mm thick designer tiles of of any size and pattern laid and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Supply and fixing 25mm dia MS fancy type vista pattern curtain rod of approved finish of superior quality including fancy type knobs at both ends, bracket for supports & rings etc complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (Padestal Pattern) white, with 'P' of 'S' trap including connection to trap and cistern and flush pipe excluding flushing cistern) including PVC white seat cover, closed pattern fixed with aluminium hinging device and making good to disturbed surface of floor, fixed as in repair complete all as specified and directed .

Suply & fix dual flushing cistern with double flush button, 10 Ltrs capacity complete all as specified and directed. Make;-Cat Part No C-002 Pearl or equivalent in Cera/Parryware

Supply and fix in repair choromium plated jet, ABS body , jet health faucet including CP stainless steel tube of standard length fixed in WC seats complete all as specified and directed.

Supply and fixing in repair PVC connections of 15mm bore, 600 mm long with brass coupling on both ends of superior quality complete all as specified and directed..

Supply and fixing in repair CP Brass 75 mm dia shower rose with or without swival joints with arms suitable for 15mm bore pipe complete all as specified and directed.

Supply and fix in repair vitreous china wash hand basin white flat back ,size 550x 400mm including cutting for and pinning in ends of brackets and 32mm dia chromium plated brass waste coupling complete all as specified and directed .

Supply and fix in repair kitchen sinks with drainage board made of stainless steel 0.80 mm thick with plugs washers and waste incl bedding in cement mortar including fixing cantilever brackets and connecting union to pipe over all size 1140mmx510mm bowl size 560x405x complete fixed in repair all as specified and directed .

Supply and fix in repair CP brass tubular towel rail 20mm dia, D type, 60 cm long between flanges fixed as in repair complete all as specified and directed.

Supply and fix 15mm dia CP bib taps of superior quality with long body cast copper alloy with crutchh or butterfly handle screwed for iron pipe fixed as in repairs, complete all as specified and directed.

Supply and fix 15mm dia pillar taps of superior quality cast copper alloy with capstan heads, cromium plated screwed down high pressure with or without lettered HOT or COLD with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and directed .

Supply & fix 15mm dia single lever one hole basin mixture of superior quality with capstan heads, cromium plated cast copper alloy with hot and cold arrangements with long shank and cup , screws for iron pipe fixed as in repairs complete all as specified & directed.

Supply and fixing in repair 15mm dia CP angle valve, cast copper alloy chromium plated of superior quality fixed as an repairs complete all as specified and directed.

Supply and fixing in repair CP brass shower rose of superior quality long body with or without swivel joints of 125mm size fixing with 15mm pipe fixed , complete all as specified and directed.

Supply and fixing in repair brass chromium plated wall mixer (Three in one) suitable for both telephonic shower and overhead shower with long bend pipe complete all as specified and directed.

Supply and fix in repairs 75mm bore PVC rain water pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per item No 76.00 but 110 mm bore PVC (SWR) pipe complete all as specified and directed.

Suply and fix in repair 75mm bore PVC (SWR) bends any redious complete all as specified and directed.

Supply & fix in repair 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

Supply & fix in repair 110 PVC (SWR) vent cowl complete all as specified and directed.

Supply & fix in repair 75mm dia outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

Supply & fix in repair PVC (SWG) gully trap 125/110mm, setting and jointing with solvent cement complete all as specified and directed.

Supply & fix in repair 100mm dia CP grating complete all as specified and directed

Supply & fix in repair 125mm dia CP grating with hole for waste pipe complete all as specified and directed.

Supply and fix in repair PVC waste pipe 32mm dia for wash hand basin complete all as specified and directed.

Supply & fix in repair glass self assembly made of 5 to 6 mm thick sheet glass of size 600 x 120mm fixed with CP brackets complete all as specified and directed.

Supply & fix in repair glass corner shelf assembly fancy type made of 6 to 7 mm thick sheet glass of size 250x 250mm fixed with CP brackets complete all as specified and directed.

Supply & fix PVC bends or shoes any radius 110mm bore complete all as specified and directed.

Supply & fix in repair GI tubing 15mm bore medium grade with all fittings fixed to wall, ceiling or laid in floor complete all as specified and directed.

All as per serial item no 90 above but 20 mm bore complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs cleaning etc and hoisting if required reconnecting and re-fixing in position and cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes for exc 250 & n. exc 500 ltr capacity including writing date and year of cleaning of height not less than 50mm and width not less than 20mm on plain base with synthetic enamel paint etc complete all specified and directed.

Supply & fixing 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical, vertical in closed top) hoisted and fixed in position all as specified in SSR Part-I including dismantling water tanks and removing complete all as specified & directed.

Supply & fixing ball valve high pressure PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed. (Minium weight 20mm to -210 Gms complete all as specified & directed.

Taking down old existing water proofing treatment from the top of RCC / arch slab, including taking down existing PCC padding or plaster and hacking the top of RCC Slab, Cleaning with water and disposal of rubbish off the premises complete all specified and directed.

Material & Labour for 40mm thick average thickness of PCC 1:2:4 type B-1 (using 20mm graded stone aggregates) as in padding on roof finished even and fair without using extra cement all as specified and directed.

Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat using bituminous primer @ 0.30 kg per Sqm fikkiwed evently by a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial hot blown bitumen, over it laid with APP modified polymeric water proofing membrane minimum weight 3.6 kg per sqm reinforced witth non woven polyester fabric (weight not less than 160 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100 MM as per manufacturer's instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer's instructions, complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed

Materials and labour for applying one coats of exterior emulsion paint (weather proof) including preparation of old surface of walls complete all as specified and directed

Supply and fixing mild steel framed work such as grills, grating, guage etc with end of bars shouldered and / or riveted forged into spikes, framed guard bars, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

Supply and fix 2nd class hard wood, plain, solid straight chowkats and frame rebated on solid, rounded or chamfered put together with glue pinned at joint all as specified.

Supply and fixing framed work as in doors / windows or gates of angle, with gusset plates, rails, braces, etc. drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening and fixing conforming to Fe 290, E-165 complete all as specified and directed.

Dismantling of ceiling boards of any description and any thickness including cover fillets complete all as specified and directed.

Material & labour for provision of GI frame work(snap grid) suitable for size as in false ceiling of size 605mmx605mm consisting of followings and all as directed:-i) Aluminium sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of aluminium anodized main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with and including supporting hangers consisting of 4mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with aluminium anodized angle bracket, of size 15mmx15mmx1.5mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with aluminium anodized angle of size 25mmx25mmx1.4 m anodized m thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of anodizing shall be 15 micron complete all as specified and directed

Supply and fix 7-8mm thick gypsum board withn aluminium coating on back side in ceiling size 60cm x 60cm fixed to aluminium snap grid complete as per manufcturer's instructions complete all as specified and directed.

Supply and fixing in repair vitreous china squatting pan white Orissa pattern of size 580x440mm white with integral foot rests excluding flushing cistern including connection to trap and cistern, flush pipe and making good disturbed surface of floor to match the existing complete all as specified and directed.

Jay Ambay Enterprises