8381 REPAIR/REPLACEMENT OF FLOORING, PLASTERING, BLOCK WALLING, ALUMINIUM DOOR, WINDOW, CEILING, PLUMBING AND SANITARY FITTINGS AT NADFM UNDER AGE BR I SOUTH PUNE

Amount

Demolition of brickwork or stone / boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash Bricks straight or curved on plan exe. 6 mtr mean radius with moduler bricks in CM 1:6 complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (above or below ground level) and disposal of debris and rubbish to out side the MD land all as directed.

Demolition of stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar complete all as specified and as directed.

M&L for PCC in foundation in 1:4:8 type D2 (using 40mm garded aggregate) in foundation filling, sub base and mass concrete complete all as specified and as directed.

M&L for PCC type B-1, 1:2:4 (using 20mm graded stone aggregate) 50mm thick as in floor, finished the surface fair and smooth using extra cement complete all as specified and as directed.

Dismantling of wall/ceiling boards of any thickness including cover fillets complete all as specified and as directed.

S&F POP false ceiling with 12 mm thick glass fibre reinforced Gypsum ceiling tiles of prima fine fissured micro look white coloured laid over and including grid work 600x600mm using GI powder coated “Tee” section grid (Silhaute type) as Main 'T' 38 X25 mm , cross 'T" 25x25mm and wall angle 25x25mm grid and 6 mm dia GI suspension wire etc incl over a coat of 1-2 mm thick POP finish complete all as specified and directed.

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle and hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light at as specified and directed.

M&L for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate), 100 mm thick in sub base floor complete all as specified and as directed.

M & L for hardcore of broken stone or boulder not exc. 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate), 75mm thick, laid in alternate bays, finish the surfaces fair and smooth using extra cement complete all as specified and directed.

S&F Stainless steel pipe SS-304 railing decorative baluster Med Grade in Stairs incl all fittings and accessories all as specified and directed by Engr-in-charge

M&L for 3mm thick Veneered decorative fixed with screws and fevicol as to be fixed in raised wall paneling or flush shutters etc including malamine polish over veneer plywood complete all as specified and as directed. (Make : Century or of equivalent)

S&F 12mm thick plywood, grade BWR, type BB, commercial faces, fixed with screws to timber frame work complete all as specified and as directed.

S&F in repairs Plain fillets in 2nd class hard wood, sectional area exc 13 & not exc 25 sqcm, wrought, fixed with screws etc complete all as specified and as directed.

S&F in repairs 2nd class hard wood of sectional area 8 Sqcm to 12 Sqcm round beading to top & bottom of wall panneling work with melamine polish for architect look fixed with screws etc. complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade over a coat of pink primer complete all as specified and as directed.

Material and labour for completely removal of existing treatment on surface of walls and applying of two coats of texture paint over alkali resistant priming paint including applying 2 mm thick wall care putty etc all as specified & directed.

M&L for Complete removal of existing treatment and applying two coats of luster paint white or tinted on walls including preparation of surfaces complete all as specified and directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth including removing existing treatment completely and applying two coats Weather shield exterior paint complete all as specified and as directed.

M & L for preparation of surface of any description (plastered and old decorated) over 10cm width or girth and applying one coat of Apex Ultima Weather shield paint complete all as specified and as directed.

M&L for preparation of old decorative surfaces of wall incl, cornices (plastered or unplastered) of any description, sand papered and dusted and applying two coats of Oil Bound distemper complete all as specified and as directed.

All as per Ser. item No 23.00 above but on ceiling complete all as specified and as directed.

M&L for complete removal of old decorative surfaces of any description and applying 1 mm thick wall care putty on wall/ceiling complete all as specified and as directed.

M & L for french polishing on surfaces of any descrption, exceeding 10 cm width or girth over a coat of a coat of wood filler including cleaning and preparation of old wooden surfaces complete all as specified and as directed.

Material and labour for prepaparation of old wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shade complete all as specified and as directed.

M&L for preparation of old painted wooden surfaces exe 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

All as per Ser. item No 28.00 above but applying one coat on steel surfaces complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors appron etc complete all as specified and as directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar(1:6) complete all as specified and as directed.

M&L for coloured joint free Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exc 1.2 sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match (light colour) including laid over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed.

Supply and fix in repairs CP bath fitting as specified and as directed by the Engr -in-Charge for the following:-.

Bib taps CP 15mm bore fancy type with wall flange conforming to CAT No. CON- 037 Jaquar/ 9206 (CASA) of Prayag or of Equivalent make specified here in after

Soap dish CAT No. ACN-1131N Jaquar/BA-259 of Prayag or of Equivalent make specified here in after

CP towel rail 20mm dia and 600mm long including brackets conforming to CAT No. ACN-111N of Jaquar/ BA-20 of Prayag or of Equivalent make specified here in after

Health faucet CAT No. ALD-583KN of Jaquar/ BEA-85 of Prayag or of Equivalent make specified here in after

Angular type stop cock conforming to CAT No. 053 of Jaquar/ 9210 of Prayag or of Equivalent make specified here in after

CP toilet paper holder conforming to CAT No. ACN-1151N of Jaquar/ BA-38 of Prayag or of Equivalent make specified here in after

CP 15mm bore concealed stop cock with long neck conforming to CAT No. CON-069 of Jaquar or of Equivalent make specified here in after

CP towel ring round with round flange conforming to CAT No ACN-1121 BN of Jaquar/9218 of Prayag. or of Equivalent make specified here in after

CP wall mixer 3 in 1 including telephone shower for 15mm bore of pipe conforming to CAT No.CON 281 and HSH -1939 of Jaquar/ PIS-70 and BH-73 of Prayag and or of Equivalent make specified here in after

S&F 2 way bib cock with wall flange conforming to CAT No. CON 041N of Jaquar or of equivalent make specified here in after

S & F vitreous china wash under counter basin (colour), oval type conforming to CAT No. CNS-WHT-705 of "Jaquar" or of equivalent make specified here-in-after set in and CP waste coupling and CP bottle trap conforming to CAT No. ALD-709 and ALD-769 and Pillar cock long neck with aerator CAT No CON -021KN of "Jaquar" or of equivalent make all as specified and directed by Engr-in-Charge.

S & F in repairs vitreous china wash down floor mounted single piece water closet pan with UF seat cover, hinges, fixing accessories set, cistern fittings, trap distance (mm) S-300, 2.5/4.2 lit flusing, Rim less, Tomado flushing, Size 360 x 680 x 750mm Ivory coloured , 'P' or 'S' type, conforming to CAT No OPS-WHT-15851SN of "Jaquar" or of equivalent make specified here-in-after complete all as specified and as directed.

S&F in repairs vitreous china, squatting pan, 'Orissa' pattern, size 580 x 440mm white, with integral foot rest, including concrete bedding and PVC flushing cistern 10 Ltr capacity including all internal fitting, inlet, outlet pipe connections etc. complete all as specified and directed.

S & F in repairs vitreous china wash basin white flat back of size 550mm x 400mm including 15mm dia CP pillar tap,CP waste coupling 32mm, chain and plug and PVC waste pipe including CI brackets, etc. complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity make ISI or equivalent incl all internal fitting, pair of bracket, including inlet/outlet PVC pipe connections etc complete all as specified and as directed.

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32mm dia of suitable length for low level cistern complete all as specified and as directed.

S&F 12mm thick bathroom shower glass partition with stainless steel fixing arrangement complete all as specified and as directed.

S&F in repairs PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to wall / ceiling or laid in trenches of following size :

110mm bore

75mm bore

S&F in repairs PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed.

S&F in repairs PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed.

S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and as directed.

S&F PVC SWR branch piece, (Double 'Y') equal or unequal of 110 mm bore complete all as specified and as directed.

Supply and fix in replacement rotational moulded polyethylene water storage tanks in replacement (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of washouts, (vent pipe all as directed of following capacity including all new tank nipples brass ball valve and PTMT float valve with aluminium rod of suitable size :-

M&L for Pulastic Classic 110 is a PU wear resistant coating comprising of rubber matt in roll form of P.U. Layers in floor complete all as specified and as directed. (Make : GO SPORTZ / EBACO or of equivalent as approved by GE)

S&F aluminium powder coated three track sliding window with two or more shutters with & including 4mm thick tinted glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc using PVC beading etc using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes : (a) Frame bottom 20620 (b) Frame top & side 20681 (c) Shutters top & bottom 20844 (d) Shutter inter lock 20724 (e) Handle (Side) for 20606 shutters

S&F aluminium powder coated partition using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved with 12 mm thick both side prelaminated particle board interior grade of approved colour in bottom panel and 5mm thick plain glass in top panel fixed with aluminium clips, beads, rubber gaskets etc., centre to centre distance of vertical member shall not exceeding 1mtr and horizontal member shall not exceeding 1.10 mtr using following aluminum section as specified in Jindal Catalogue complete as directed fixing to stone masonary walls with & including Ist class teak wood plugs of size 20mmX20mm at an interval of 0.5m alround the track including drilling holes complete :- (a) SP – 20048 (b) DP - 20047 (c) Glazing clips - 19352

S&F aluminium powder coated single leaf door on pivots alongwith hydraulic door closer, door lock, handles, 5mm thick glass i panel and etc., fixed with rubber beading and glazing clips and using following sections of `Jindal Aluminum Ltd ' or equivalent in Ajit India Pvt Ltd or Crystal Bombay, as approved all as directed by Engineer-in-Charge :- (a) Rectangular tube 14005 (b) Shutter vertical (c) Shutter top rail 19503 (d) Shutter Middle rail 060 (e) Shutter Bottom rail 19511 (f) Glazing clips 19352

M & L for carrying out non destructive water proofing treatment to sunken slab of toilets consisting of one WC, one nahani trap at bathroom and one nahani trap at Kitchen including cleaning of surface with wire brush removing loose particles, greasy elements, detecting leakage point, sealing joints of tiles/cracks in floor / wall with and including second course injection of CORESEAL 135A/CORESEAL 135B all as per manufacturers instructions and as directed by Engr-in-Charge. (Note :- The rate is inclusive of replacement of any defective fittings/fixtures of any type/material elbows, bend, tee, reducer single 'Y', double 'Y' with cleaning eye and concealed piece of pipe below floor as well as between wall and bend.) (Makes for this item :- AQUATYTE, CREAT SEAL grouting compound of Ashwin Enterprises, GPSS (ground penetrating sealing system) of Saga polytech or similar brand as approved by Accepting Officer.)

Dismantling of wrought iron of any description not otherwise provided for

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

S & F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified including dismantling of old unserviceable sheet complete all as specified and as directed.

S & F IInd class hard wood 35mm thick factory made, flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side complete all as specified and as directed.

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

S & F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm etc complete all as specified and directed.

S & F aluminium butt hinges of cold rolled mild steel, medium weight, 100mm size fixed with welding with existing MS door frame complete all as specified and as directed.

S & F aluminum anodized barrel tower bolt of extruded section 200mm size etc complete all as specified and directed.

S & F aluminum anodized sliding door bolt 300mm size etc complete all as specified and directed.

S & F aluminum anodized bow handle cast type 150mm size etc complete all as specified and directed.

M&L for 16 to 18 mm Granite (of any type) work (table rubbed and polished) in steps, cooking platforms and like, laid over and including 10mm thick screed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite as counters of any radius including rounding off the exposed edge of granite stone complete all as specified and as directed.

Taking down chowkats or frames of wooden or steel n.exc 1.5 sqm (without taking off shutters from the frames) complete all as specified and as directed

Taking down chowkats or frames of wooden or steel exc 1.5 sqm & not exc. 4 sqm (without taking off shutters from the frames) complete all as specified and as directed

Gauri Associates

TULSAYA CONSTRUCTION

L.K.R.TIWARI CONSTRUCTION

Santosh Pandurang Pise

REKHA ELECTRICALS

M/s.BAJRANG CONSTRUCTION

PRASHANT CONSTRUCTION