15/EUDC-PURANIA/2025-26

Amount

Safe loading, carriage unloading of following material from center store Daliganj to J.E.'s store and from J.E.'s stores to work at site.

(a)STP Pole 9/11/13 Mtr. Long.

(b)PCC Pole 8.5 Mtr Long.

©ABC 3X95/120+1X70+1X16 sqmm

(d) ACSR Conductor Weasel/Dog/Raccoon

Attending breakdown by Replacement of damage PCC Pole/STP pole, opening of HT/LT line & accessories by digging pit its proper erection . All T&P shall be provided by the Contractor.

Attending breakdown by Replacement of damage conductor of 11 KV/LT line Opening and dismantling of all the wire and accessories .All T&P shall be provided by the Contractor.

Attending brekdown by Replacement of damage ABC by newly ABC its Erection & commissioning of (3x95/120+1x70+1x16 sq.mm) Aerial Bunched Conductor. Only ABC shall be supplied by the department.

Fabrication and erection of missing/damaged wiremess fencing 02 Mtr. Height with a gate and with retaining grouting of fabrication M.S. Angle 65x65x6 mm support (05 Nos. in a sub-station) Plinthing of fencing/support with all material as per specification/drawing complete in all respect.

Repairing of damage/Rusted steel Tubular Pole by digging of pit up to 2 for proper position, Putting 03 Nos. Angle from of size 35x35x6 mm, 3 long properly welding on 3 circle with pole than grouting and plinthing 300 mm Above level with cement concrete and sand and bricks ballast, (All material, labour and T&P will be arranged by the contractor at his own cost)

Construction of masonry type transformer Plinth of size 2x2x1.5 M with brick cement coarse sand and brick ballast, filling of sand in the hallow space, Plastering of surface in ratio1:4:6 top of the plinth 4 thickness grouting of 02 Nos. MS Channel of size 100x50x2000mm on the top of the plinth for placement of transformer (All the material, labour and T&P will be arranged by the contractor at his own cost)

Pipe type earthling of T/F with 60 fit deep boring and providing GI pipe 1.5" dia (60 fit GI pipe) and GI strip 25x5mmx6 meter long attached with clamp, L piece, nut & bolts and GI pipe cap. All material shall be supplied by the contractor.

Supply of fixing of Henley type taleless fuse unit on LT Distribution pilled box with Clamping of lug required size of side in LT PVC cable.

500 Amp/600 Volts

300 Amp/600 Volts

Al Bus bar

Re-sagging of LT, O/H, ABC Line, opening of ABC at service point from distribution box and opening of Consumer service cable after Re-sagging of ABC re connection of consumer service cable on ST Pole/PCC. (All the material will be arranged by the contractor).

Fixing of Cu L piece of size 300x65x6 mm 400/250 KVA L/T Bushing rod for proper connection of LT Cable. (All the material will be arranged by the contractor)

Re sagging of LT/HT including 33 KV line alongwith spare parts and hydra for various spans.

Replacement of broken/damaged PCC Pole (As per RESPO Norms)

Installation of D.O. arrangement including mounting of clamps with nuts & bolts, 11 KV Pin Insulator with pin (All material will be provided by the contractor)

Cutting & Chopping tree branches for clearance of HT line

Proper dressing of LT and 11 KV Cable of 11/0.4 S/S with fixing accessories

Replacement of LT Cable lead wherever (Required material provided by Dept.)

Replacement of burnt jumpers of LT line.

Replacement of burnt jumpers of HT line.

Replacement of Disc insulator & insulator in 11 KV line

Attending breakdown of 11 KV feeder (By opening & closing of cable at deferent exposures.)

Cradle guarding of HT line by GI span wire. GI wire supplied by contractor.

Lug punching with replacement of damaged Lugs with nut & bolt in LT Compartment of pillar box.

Lug punching with replacement of damaged Lugs with nut & bolt in LT 11/0.4 KV 400 KVA T/F.

Lug punching with replacement of damaged Lugs with nut & bolt in LT 11/0.4 KV 250 KVA T/F.

Lug punching with replacement of damaged Lugs with nut & bolt in LT 11/0.4 KV 630 KVA T/F.

Checking of T/F oil and Toping up of the same.

Checking of oil leakage from T/F and replacement of oval Oil seal etc and tightening

Cleaning of 11/0.4 KV S/S removal of gradate dumps and its stacking outside/inside the.

HARE KRISHNA ENERGY PROJECTS (BID ID -5258105)

PRACHI ENTERPRISES (BID ID -5259666)