Internal/External Electrification Work of Tourist Arrival Centre at Ziyarat Sain Miran Sahib Poonch.

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI boxand earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required, GROUP C.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire.

2x4 sqmm + 1x4 sqmm earth wire.

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 32MM.

supply and fixing of suitale size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 3 pin 5/6 A modular socket outlet and 5/6A modular switch connections etc as required.

supply of 22 watt led surface mounting tubelightlight made of heat sink die cast high efficiency diffuser along with suitale constant current driver complete as required.

supply and fixing of suitale size GI box with modular plate and cover in front on surface or in recess including providing and fixing of 6 pin 5/6 A and 15/16 A modular sockt outlet and 15/16A modular switch connections etc as required.

supply and fixing 3 pin, 5 A ceiling rose on th existing junction box including connections etc.

supply and drawing of UTP 4 PAIR CAT 6 LAN CALE in the existing surface/ recessed steel/PVC conduit as required.(3 run of the cale).

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

4 Module (125mmX75mm)

12 Module (200mmX150mm)

8 module

3 module

6 module

Providing and fixing angle/battern holder along with LED bulb 9 watt.

supply and fixing of following rating 415 V isolator in the existing MCB complete with connections, testing and commissioning etc, as required.

Single pole and neutral (6A-32A)

4 pole 100amp

2 pole 100amp

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 WAY (4+8) SINGLE DOOR.

Supply of 9 watt led surface mounting downlight concealed tpye made of heat sink die cast high efficiency diffuser along with suitale constant current driver complete as required.

Supply of 22 watt led surface mounting tubelightlight made of heat sink die cast high efficiency diffuser along with suitale constant current driver complete as required make.

providing and fixing of T5 tube for mirror lighting 5 wattage.

providing and fixing of ceiling fan 1200mm sweep.

providing and fixing of fan regulators.

supply installation testing commisioning of maintance free chemical earthing with 10 feet rod, 75mm dia,3.2 mm thick of hot dipped galvanised G.I tue filled with 50x6mm G.I strip, CCM chemical and sealed at both ends. Tube shall have double layer electrode, lead conductor welded to tube, with back fill and plastic cover and complete in all the respect.

supply of the following 1100v grade aluminium conductor XLPE insulated PVC sheathed steel armored/ unarmored cables as per ISI standards 3.5 core 50 sqmm aluminium conductor.

providing and fixing of deep junction box of mild steel ISI marked.

providing and fixing of deep FAN boxes ISI marked made up of mild steel.

supply and fixing of 25sqmm cu conductor cable.

Design, manufacture , supplying, loading and unloading assemling at site, instalaton, fixing on the position, testing and commissioning of the MAIN CONTROL PANNEL cubical type , dead front 2.5mm thick steel enclosed, including changeover of capacity 232A , MCCB 200A 4 NO. , MCCB 200A 1 NO., AMMETER AND VOLTMETER of make:- EMC ELECTRIC.

SUPPLYING and fixing of following modular switches/socket on the existing modular plate and switch ox including connections.

5/6A SWITCH

15/16A SWITCH

3 PIN 5/6 A SOCKET

6 PIN 15/16A SOCKET

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Javid Iqbal

Saahil Mir