22/HDA/EC-ELECT/2024 2025

Amount

Supply & delivery of LED Street light of following specifications: a) 90 W (+/-5%) for each set, b) System efficiency at Luminaries level shall be minimum 115 Lumen/Watt whereas LED Chip level efficiency shall be minimum 160 Lumens/ Watt. c) The luminaries should be of IP 66 protection, Driver IP 66 & IEC 61000-4-5 d) In put Voltage of 130 V -270 Volt. 50 Hz. A.C. supply. e) Driver should have in-built protection against high voltage surge, open circuit & short circuit. f) Housing should be of Die-cast aluminum housing with epoxy powder coating and having cooling fins for effective heat dissipation. Separate cavity for driver & LED lamp. g) Operating Temperature: 0 deg to +55 Degree C with a relative humidity of 10-95% RH h) Third party test report from NABL. Accredited laboratory of LM-79, LM-80 & IP-66. i) CRI (Color Rendering Index) shall be >70 or above. j) Make of LED Chip: - Nichia, Cree, Osram, Lumileds. k) Life of LED shall be rated at 50.000 Hrs or above. l) Correlated Color Temperature normal (CCT) 3700K m) The luminaries withstand voltage stress of 440V for 8 Hrs, should have an auto shutdown (@325V and have an auto recovery feature. n) The product should have 5 years warranty period. [Make: Crompton/Philips/Wipro]

Fixing only Street / Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (Excluding the cost of RCC Foundation)

Supply & delivery of 8 Mtr. Hot Dipped galvanized Octagonal Pole with G.I 4nos. of J- bolt, M-20, 600mm long, 12nos. of Nuts with 16nos. of washers for foundation and Straight arm of maximum 1.5 Mtr. in Length (Refer to the Specification and Drawing in Annexure-I and follow Rate submission form-I). The rate should include testing at your works, all taxes and delivery the materials at Haldia. [Bajaj/Velmont/Transrail/Utkarsh]

Installation of 8 Mtr. long G.I octagonal pole.

Supply and delivery of 1.1 KV grade 4 C X 16 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any. The cable should have ISI mark.

Supply and laying of HDPE pipe [ISI Marked, PE 80/PE 100, PN 10] 50 mm dia O.D as per appropriate specification at minimum 600 Mtr depth from the ground level including necessary excavation and making temporary trench, making good by filling & ramming.

Laying only Cable upto 50 sq.mm through existing RCC/Hume/ GI /HDPE Pipe/open masonry trench for single, 2, 3, 3½ & 4 core

Finishing of the XLPE/PVC insulated armored cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc. 4 Core X 16 Sq. mm

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire wiyh the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs/run X 2 runs per pole).

Supply GI earth Spike (1830 X 20 mm ) (Each Pole).

Preparation of RCC foundation of 400 mm dia and 1500 mm hight (1200 mm below the Ground Level and 300 mm above the Ground Level) with required rod, cement, chips and sand etc. at the ratio 1:1:5:3 with ground bolt 4 nos for fixing the 8 Mtr Hight G.I Octagonal pole (excluding supply and delivery of 8 M Pole and Nut Bolts).

Supply, drawing and Connection of luminaries with 3C X 1.5 Sq mm PVC insulated FR copper conductor through the Poles from looping box to light fittings as required. (per Pole 2 Nos) [ Havells/Polycab/Gloster/ KEI]

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and connection with Terminal connector at the suitable location of the pole.(Legrand)(per Pole 1 No)

Supply and Installation of HDA printed logo suitable 15"×9" on GI Octagonal/tubular Pole, on brick foundation of meter box, feeder pillar box. (3 nos logo p/pole,per meter box,per feeder pillar box.)

GST @18% of Total Amount

CESS @1% (Total Amount including GST)

Acropola (BID ID -6318704)

Electro Engineering Concern (BID ID -6318732)