Construction of Road, Trenches and allied civil works at 132 kV S/S Smadh Bhai

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subaequent filling around masonry im35cm layers with compaction including disposal of all surplus soil as drected within a lead of 30 Mtr.

Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)

Centring and shuttering for sides and soffits of Beams,beam launching girder bressumers, lintels

Centring and shuttering for flat surfaces such as suspended floors, roofs,landings, chajjas, shelves etc.

Centring and shuttering for stair cases with sloping withsoffits including risers and stringers.

Cement Concrete 1:8:16 with 40mm gauge stone aggregate using concrete mixer volumetric type.

Cement Concrete 1:6:12 with 40mm gauge stone aggregate using concrete mixer volumetric type.

Cement concrete 1:5:10 with 40 mm gauge stone ballast using concrete mixer volumetric type.

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type.

Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated needle vibrator but excluding steel reinforcement centering and shuttering in foundation and plinth.

Reinforced cement concrete M-20 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated needle vibrator but excluding steel reinforcement centring and shuttering in superstructure.

Damp proof course 7.5 cm thick of cement concrete 1: 2: 4 with two coats of bitumen 20/30 penetration at 1.65 kg per sqm laid hot and sanded.

First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:5 in superstructue

First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth.

First class burnt brick work laid in cement sand mortar 1:4 in 1st storey upto 4.0 mtrs above plinth

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.

Bottom Khurra on ground 1.2m x 0.6m consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5mm thick cement plaster 1:3

Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.

Providing and fixing 110 mm dia SWR U.P.V.C Rain water pipe (ring fitted type-A) as per IS:13592 including jointing during masonary complete as per specifications and to the entire satisfaction of Engineer-incharge. (If fixed on wall face clamp to be paid separatly as per respective item)

Providing and fixing 110 mm dia SWR U.P.V.C bend for Rain water pipe as per IS:14735 including jointing complete as per specifications and to the entire satisfaction of Engineer- in- charge.

Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling.

Conglomerate floor 40mm thick cement concrete topping 1:2:4 using concrete mixer volumetric type.

Conglomerate floor 50mm thick cement concrete topping 1:2:4 using concrete mixer volumetric type.

Flat brick or tile flooring laid in cement sand mortar 1:4 on 100mm thick cement concrete 1:8:16 and 100mm thick sand filling and cement pointed 1:2 on top.

Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body). (Double Charge technology :-Double Charge technology is far more advanced than SST. This technology uses granules in order to create different shades. Tiles using this technology are ideal for high-traffic areas. These are the latest technologies of making vitrified tiles. In these technologies, design is brought in a tile by using dry colour powders during the tile body (green tiles) is being pressed in a tile press. This is also called random powder technology which is considered as the latest method of manufacturing Vitrified Tiles. Here designs are found throughout the tile body.)

12.5 mm thick cement plaster 1:4

12.5 mm thick cement plaster 1:5

20 mm thick cement plaster 1:4

20 mm thick cement plaster 1:5

10 mm CP 1:4 under side ceiling

Striking joints in lime or cement on brick walls

Applying priming coat with metal primer on new steel or iron work including preparation of surface (With special quality paint)

Painting two coats with aluminum paint to give an even shade excluding priming coat (With special quality paint)

Finishing walls with acrylic smooth exterior paint of required shade with two coats applied @ 1.67 litre/10sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm

Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)

Preparation of plastred surface or concrete surface for painting PE (incluiding sand papering the surface ) using ready mixed cement based wall putty by applying 2-coats to get required finish.

Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt) up to .50 sqm

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge:- Fixed portion for chowkats

Providing and fixing aluminium work for doors,windows, ventilators & built up standard tubular sections & other sections 733 & IS 1285 of Jindal / equivalent make approved ny engg incharge fixed with rawl plugs & screws with fixing clips or with expansion hold fastners i/c necesasry fitting up to gap at junctions, top, bottom a7 sides reqiored PVC plugs Aluminiumsections shall be smooth rusat free straight & jointed mechanically complete as per architectural drawings & the directions of engineer incharge:- Shutters of doors / windows/ cup Boards

P&F 12 mm Prelaminatrd particular board flat pressed 3 layers or graded wood particular board conforming to IS 12823 in panneling fixed in al. doors with CP brass/stailess steel screws compl;ete as per drawing

P&F glazing in aluminium doors windows ventilators shutters & partitions as per architectural drawings and the directions of engineer incharge(Float glass panes of 5.5 mm thickness)

Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge

Steel work, fixed independently without connecting plates, including cutting, hoisting and fixing in position Steel ,75x12mm

Mild steel reinforcement for RCC work where not included in the complete rate of RCC including bending, binding and placing in position complete: Supplying , 32mm dia earth rods

Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe 500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Welding by gas or by electric plant, including carriage to and from workshop.

Providing and fixing stair case railing made out of M.S. square bars 20mm x 20mm as vertical part 0.70 m high fixed with M.S. base plate of 40mm x 40mm x 6mm and flat iron 40mm x 6mm as hand rail complete in all respect.

Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm:- From 0 to 15 m.

Boring for hand-pump in clay fitting strainer and pipe. Above 75mm dia bore but not exceeding 100mm:- Exceeding 15 m but upto 30 m.

Wiring fan point with sheet metal fan box (shape hexagonal & sheet thickness not less than 1.60 mm) in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.

Wiring light point in PVC insulated copper conductor singlecore FRLS cable (ISI marked) overall 1.5 sq. mm,1100volts grade.

Wiring call-bell point in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).

Wiring 3 Pin 6 Amp. Plug control comprising wall socket and switch including bonding to existing earth with PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.

Wiring 16/20 amp. Plug in PVC insulated copper conductor

Supply and erection of PVC insulated single core FRLS 1.5 mm copper conductor

Supply and erection of PVC insulated single core FRLS 2.5 mm copper conductor

Supply and erection of PVC insulated single core FRLS 4mm copper conductor

Supply and erection of Havey gauge welded conduit pipe 25 mm dia

P/F general purpose tube fitting oo crompton make on wall ( model DILB12414EB9) of 1x36 W T-5 (CFL)

P/F ceiling fan 1400 mm sweep crompton make

S/F Exhaust fan 12" sweep of Crompton make including louver ( Model-T5JB1328EB) of v1x28 WT-5

P & F 200 watt gate light posts/ lantern of Crompton Greeves/ Bajaj/ Equivalent

P/F of Steel gate 5.80mtr wide complete as per drawing

Providing and fixing of cromptomn make 3 BHP 3 Phase non clog pump including control panel, 10 mtr 4 mm thick copper wire, 10' long 2" dia GI suction pipe and 10' long 2" dia G.I. delivery pipe completed.

P/F angle iron posts of various sizes 75x75x8mm,50x50x6 mm

P & F of barbed wire having dia 2.24mm (2 ply) barbed with 4 points as per IS 278/1962 i/c all fitting such as u clamp tighting nuts and bolts unrolling and stretching complete in 4 rows as per drg approved

p/f G.I wire netting mesh of 12 gauge 50x50 mesh with 180 cms.high fastened with 4 nos. m.s wire rope 6/7 strand 1/16'' dia each complete in all respects as per drwg approved

Steel work in flat etc. for cable racks of MS angls40x40x5 mm and MS Flat 75x6mm

P&F MS angle nosing 50x50x3mm fitted with 6mm square bar on top and 6mm dia.150 mm long hold fastener at 60cm c/c complete in all respects for outdoor cable trenches

Supplying, Hoisting & placing of Ferro-cement trench cover,frame of size given below made of MS flat 50x3mm with 6 mm dia bars at 4-1/2'' and 9'' c/c welded to flat with lifting hook as per Drg. No. CW/DS-2537-R-5 and CS/DS-2420-R-3 complete of the following sizes:- T2- Type (2' 8" x 1' 6")

Supplying, Hoisting & placing of Ferro-cement trench cover,frame of size given below made of MS flat 50x3mm with 6 mm dia bars at 4-1/2'' and 9'' c/c welded to flat with lifting hook as per Drg. No. CW/DS-2537-R-5 and CS/DS-2420-R-3 complete of the following sizes:- T3- Type (2' 2" x 2' 2")

Supplying, Hoisting & placing of Ferro-cement trench cover,frame of size given below made of MS flat 50x3mm with 6 mm dia bars at 4-1/2'' and 9'' c/c welded to flat with lifting hook as per Drg. No. CW/DS-2537-R-5 and CS/DS-2420-R-3 complete of the following sizes:-P4- Type (3' 4" x 1' 6")

Extra carriage of material beyond 5.00 Km:- Cement

Extra carriage of material beyond 5.00 Km:- Steel

Extra carriage of material beyond 5.00 Km:- Fine sand

Extra carriage of material beyond 5.00 Km:- Coarse sand,Crushed stone & Stone ballast

Difference of rates of material:- Crushed stone 13.2mm

Difference of rates of material:- Crushed stone 11.2mm

Difference of rates of material:-Coarse Sand

Difference of rates of material:- Stone Ballast 40 mm

Difference of rates of material:- Bricks

Difference of rates of material:- Tiles

PAUL AND COMPANY

INDO ENGINEERING WORKS