PROVN OF SECURITY BOUNDARY WALL FROM LAB SEC OF FD VET HOSP (MAIN GATE) TO MIL FARM GATE AT FMSD UNDER GE GUWAHATI

Amount

Materials and labour for excavation in trenches soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed.

Materials and labour for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil complete all as specified and directed.

Materials and labour for Removing excavated material in soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Materials and labour for Cement concrete type D2 (1:4:8)40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

Materials and labour for use and waste of Formwork to sides of concrete foundation, footings bases of columns raft and raft beams sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished surface of concrete flat complete all as specified and directed.

Materials and labour for Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers etc. for rough finished surfaces of concrete flat complete all as specified and directed

Materials and labour for RCC design mix M-25 using 20mm graded aggregate as in foundations bases of columns plinth beams etc complete all as specified and as directed.

Materials and labour for R.C.C design mix M-25 using 20mm graded aggregate as in Beams, cantilevers, bressummers,lintels over 1.5m span complete all as specified and as directed.

Materials and labour RCC design mix M-25 using 20mm graded aggregate as in columns, pillars etc complete all as specified and as directed.

Material and labour for use and waste of form work to sides of pillars, columns etc for rough finish surface of concrete complete all as specified and as directed.

Materials and labour for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Materials and labour TMT bars 5mm dia and over upto and including 10mm dia as in strriups cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and as directed.

Materials and labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed..

Materials and labour Cutting holes into or through superficial area of cement concrete slabs, chajjas, etc. reinforced or otherwise exc 100 sq cm but n exc 250 sq cm complete all as specified and as directed..

Supply and Fixing MS angle section conforming to Fe- 290 Gde-E -165 embeded in concrete to secure wire mesh etc including necessary preparation of surfaces and applying ane shop coat zine chromate primer complete all as specified and as directed.

Supply and Fixing Galvanished two strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing, straining and fixing to MS angle section complete all as specified and as directed.

Materials and labour For Rendering 10mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Materials and labour For Rendering 10mm thick cement plaster (1:6) on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Materials and labour for Two coats of cement base paint over a coat of alkali resistant primer incl preparation of new plastered or unplastered surface of wall complete all as specified and as directed.

Materials and labour Preparation of new steel surface of any description over 10cm girth or width,not otherwise described with two coats of synthetic enamel paint of ordinary tint complete all as specified and as directed.

Materials and labour for plain cement concrete(1:2:4)type B0(using 12.5 mm graded aggregate) as in coping including weathering,slighty rounded or chamfered angles and throating and including use of necessary formwork complete all as specified and as directed.

Shri Debajyoti Das

Goswami Traders

M/s Dhani Enterprise

Rana Kr Phookan