Renovation of existing bathrooms and toilets of type IV houses at csio chandigarh

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)

Providing and fixing Ist quality ceramic glazed wall tiles with highlighter( including screen printing)conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Kajaria / NITCO or equivalent make smaple to be approved prior to fixing.

Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :100x58x1.90 mm

Providing and laying Ceramic rectified floor tiles of any size mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete.make Kajaria/ NITCO

Applying one coat of water thinnable cement primer of approved brand and manufacture of Asian / Nerolac / Dulux on wall surface : Water thinnable cement primer

Providing and applying white cement based putty of average thickness 2 mm average, of approved brand and manufacturer of JK wall/Birla/Asian make, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand Asian/Nerolac/Dulux give an even shade :Old work (one or more coats)

Painting with synthetic enamel paint of approved brand Asian/Nerolac/Dulux of required colour to give an even shade : two or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the wallscomplete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-ChargeWith cement mortar 1:4 (1 cement : 4 fine sand)

Demolishing cement concrete manually/ by mechanical means including disposal of material within CSIO as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within CSIO Of area 3 sq. metres and below

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within CSIO. For thickness of tiles 10 mm to 25 mm

Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within CSIO as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within CSIO.

Disposal of building rubbish / malba / similar nserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, from CSIO, for all leads including all lifts involved to Chandigarh dumpling ground.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests including dismentling existing water closet Cera/Hindware/parryware make

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan including dimentling existing Water closet.Make :- Cera/Hindware/parryware

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps Cera/Hindware/parryware make wash basin and pillar tap ESS ESS/Paryag /CERA make with wate pipe .

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. Bathcare/Hindware/ESS ESS make

Providing and fixing vitrous china flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete icluding existing dismentling and store within CSIO. 10 litre capacity - White make Cera/Hindware/Parryware

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid make Cera/Hindware/Parryware

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan complete

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete 32 mm dia complete

Providing and fixing 100 mm C.P. brass grating /jali for floor drain /grating with frame Chilly or equivelant make

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete Saint gobind/Modigard/ASAHI make

Providing and fixing soil, waste and vent pipes MS clamp or wherever required :100 mm dia Sand cast iron S&S pipe as per IS: 1729 NIF /NECO/SIRF make

Providing and fixing soil, waste and vent pipes MS clamp or wherever required :75 mm dia Sand cast iron S&S pipe as per IS: 1729 NIF /NECO/SIRF make

Providing and fixing plain bend of required degree.100 mm dia Sand cast iron S&S as per IS - 1729 NIF /NECO/SIRF make

Providing and fixing collar 100 mm Sand cast iron S&S as per IS - 1729 NIF /NECO/SIRF make

Providing and fixing collar 75 mm Sand cast iron S&S as per IS - 1729 NIF /NECO/SIRF make

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100 mm

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 75 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 75 mm outlet Sand Cast Iron S&S as per IS: 1729 NIF /NECO/SIRF make

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet Sand Cast Iron S&S as per IS: 1729 NIF /NECO/SIRF make

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms Prayag or equievalent make

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, wherever trench required including trenching ,cutting chases and making good the wall : 15 mm dia class B pipe Tata/Jindal or equivelant make

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall wherever trench required including trenching : 20 mm dia class b pipe Tata/Jindal or equivelant make

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete up to 25mm dia pipe

Providing and fixing C.P. brass stop cock of standard design and of approved make .15mm nominal bore ESS ESS/PARYAG/CERA make

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15mm dia SWV / UNIK /UF make

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :20mm dia SWV / UNIK /UF make

Providing and fixing C.P. brass bib cock of approved quality : 15 mm nominal bore ESS ESS/PARYAG/CERA make

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore ESS ESS/PARYAG/CERA make

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge ESS ESS/PARYAG/Chilly make

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.Paryag or equivalent make

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 30cm length viking /Paryag or equivalent make

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour 15 mm nominal bore with 45cm length viking /Paryag or equivalent make

Supplying and fixing aluminium strips( 22 gauge) thick and 650mm wide over the door with nail and other necesary materials

Removal of wooden door ,window from toilet, bath rooms and refixing the same after size adjustment carefully without damage in proper size and shape wherever required necessary hinges nail.

Removal of plumbing items from bath room and toilet in including refixing of same in wall after the fixing of tiles as per direction of Engineerng incharge

J P Constructions

JINDAL BUILD CARE

ADIT FABRICATIONS

CIS GLOBAL INFRATECH PRIVATE LIMITED