REPAIR/MAINT TO FENCING AND GATE IN THE AREA OF AGE B/R-I UNDER GE PANAGARH

Amount

Dismantling post or strut (wood, steel or RCC) including taking out embeded portion in concrete, and making good disturbed ground complete all as specified and directed.

Excavation in post hole each not exc 0.5 cum getting out returning, filling and ramming earth or broken rubble mixed into earth around in layers n exc 25 cm watering and removing surplus soil to a distance n. exc 50 m and making surfaces good in soft/loose soil complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Materials and Labour for plain cement concrete (1:4:8) type D-2 using 40 mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate)as in copings, kneelers, apex stones,bed plates, kerbs stone and like including formwork weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Dismantling wrought Iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F mild steel angle and flat iron section fixed independently with out connecting plate of Fe-410-W(Gde-E-250) quality -B complete all as specified and directed.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 including one shop coat of zinc cromate primer(including prepration of surface) complete all as specified and directed.

S &F framed brackets of angles or tees with web and flanges cut to shape ,drilled and counter-sunk for screw ,including bending and welding angle as necessary ,gusset plates riveting, etc.. n exc 10 kg each brackets etc conforming Fe 290 .Gde E-165 complete all as specified and as directed.

S&Fmild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings framed work such as hing as gates including pintil hinges stops,hand made sliding bolts etc complete all as specified and as directed.

Dismantling fencing wire mesh any type including line wire complete all as apecified and directed.

Supply & fixing GI chain link fencing of size 75 X 75 X 3 mm dia including welding or nuts & bolts of any size and type as directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and fix mild steel TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hoping for columns, hocking, ends and binding with and incl MS wire (appealed) not less than 0.9 mm dia complete all as specified and directed.

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n exc 10 cm long complete all as specified and directed.

S&F in repair galvanised two strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any standardral straining bolt including securing or tying at rossing with an provision of galvanised stell pin etc complete all as specified and directed.

Restaring & resecuring of galvanized 2 strand steel barbed wire including making good staples at 75 mm spacing and straning and fixing to fencing post with staple or steel pins etc complete all as specified and directed.

M&L for rcc post 1:2:4 (nominal mix) type B-0 ,1:2:4 (using 12.5 mm graded stone aggregate) as in columns, pillers post and likes set in cement morter 1:4 complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

M&L for fly ash brick straight or curved on plan exc 6 mtr mean redious built in CM 1:6 etc complete all as specified and directed.

Taking down cement plaster of any description on concrete surfaces such as soffit of RCC slab, chajjas and brick walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of new plaster surface & apply two coats of cement based paint over a coat alkali primer resistance complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L for 20 mm thick black granite polished in steps , jamb pillars, window-cills cooking plartform and like in CM 1:4 including pointing to white cement (1:2) using maarble dust with admixture of pigment to match complete all as specified and directed.

M/S Dey Construction

BABY ENGINEERING ELECTRICAL MECHANICAL STORES

M/s RAJEN ROY

UNIQUE ENTERPRISE

S. D. Construction Co.

SARASWATI ENTERPRISE (INDEX NO CEEC D-81)

SATIMATA ENTERPRISE