Repair of office building cd3 pwd gzp and construction of ladies toilet

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR item no. 15.56

Brick work with common burnt clay F.P.S. (non modular) bricks of classi designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement: 6 coarse sand) including supply of all materials, labour and T & P etc required for proper completion of the work. DSR 6.4.2 . For Extention of toilet

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing und reinforcement All work up to plinth level:1:2:4 (1 cement: 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm novninal size derived from natural sources) As per DSR item no.5.1.3 For Extention of toilet

TMT Fe-500 steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel and and over lapping & hooks. DSR 5.22.6 For Extention of toilet

12mm thick plaster with with cement and course send 1:4 over brick work minimum thickness not to be less than 1em including supply of all materials labour and T&P etc. required for proper completion of the work. As per DSR item No.13.4.1

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete As per DSR item No.13.88

Providing and applying white cernent based putty of average thickness I mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR item no.13.80

Distempering with Ist quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per DSR item 0.13.41.1

Finishing walls with water proofing cement paint of required shade New work (Two or more coats applied (@) 3.84 kg/10 sqm) sqm As per DSR item no.13.44.1

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work As per DSR item no.13.99.1

Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS :15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. As per DSR item no.11.37

Supply & fixing of 35 mm thick flush door commercial quality conforming to 15.: 2202 Part 1 (1983) including fixing of wooden cleats & stopper and including fixing and adjustment of hinges Bolts locks, handles. springs, fitting with necessary screws to be supplied departmentally. Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part 1) Bosh Side Laminated (35mm thick) DSR 9.21.1

Providing wood work in frames of doors, windows, cerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). sal wood DSR civil vol.1 item 00.9.1.1

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests as per DSR 17.1.1

Providing and fixing brass bib cock of approved quality: 15 mm nominal bore As per DSR item no. 18.15.1

Providing and fixing brass stop cock of approved quality: 15 mm nominal bore As per DSR item no.18.16.1

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm as per DSR 17.32.2

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete.as per DSR 17.18.1

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings as per DSR 17.25.1

Providing and fixing G.I. pipes complete with G.I. fittings and clanope including cutting and making good the walls ete. Internal work-Exposed on wall 15 mm dia nominal bore As per DSR item No-18.10.1

Providing and fixing of 100 cm nominal dis Chlorinated Polyvinyl Chloridic (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & bress threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complere as per direction of Engineer in Charge. DSR 18.9.9

Providing and fixing ISI marked oxidized M.S. sliding door bolts with t and screws ete, complete (Copper oxidined as per 15 1378) (100%16)mm. DSR civil vol.1 item no 9.62.1

Provading and fixing. IS1 marked oxidised M.S. tower holt black finish. (Barrel type) with necessary screws etc, complete (Copper oxidised as per IS 1378) (250x10)mm. DSR civil vol.titem no 9.63.1..

providing and fixing ISI marked oxidined M.S handles conforming to 15 4992 with necessary screws ere, complete (125mm) DSR civil vol.1 item no 9.60.1..

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI: 12701 of 1000tr capacity marked with cover and suitable locking arrangement and making necessary holes for inict, outict and overflow pipes but without fittings and the base support for tank. As per DSR item no. 18.48

Please Enable Macros to View BoQ information