Supply Installation Testing Commissioning and Training of CCTV and lighting System

Amount

Supply of IP (POE) based pole mountable camera with accessories.

Installation, testing & commissioning of Item no.1

Supply of IP (POE+) based Day & Night HD PTZ camera, with pole/wall mountable accessories.

Installation, testing & commissioning of Item no. 3

Supply of Indoor Dome Camera with mounting accessories.

Installation, testing & commissioning of Item No-5

Supply of Digital Input output module for integration of proposed IP CCTV and exiting Electric Fence system.

Installation, testing & commissioning of Item No-7

Supply of Fish Eye Camera

Installation, testing & commissioning of Item No 9

Supply of Number Plate Reading camera and software.

Installation, testing & commissioning of Item No -11

Supply of servers

Installation, testing & commissioning of Item No-13

Supply Video Management software including 150 channel license and Video recording software.

Installation, testing & commissioning of Item No-15

Supply of Work station computer

Installation, testing & commissioning of item No 17

Supply of Network switch-24 Giga port Combo managed Layer 2.

Installation, testing & commissioning of Item No 19

Supply & Installation of 8TB Surveillance hard SSD disks compatible with above Server.

Supply of Network switch-12 port, POE+managed Layer 2 with two SFP ports.

Installation, testing & commissioning of item no 22

Supplyof 12 port fully loaded LIU

Installation and commissioning of Item No 24

Supply of 12 Port UTP patch panel

Installation and commissioning of Item No 26

Supply of 24 Port LIU

Installation and commissioning of Item No 28

Supply, Installation & commissioning of 5 Mtr CAT6 Shielded Patch Cord

Supply, Installation and commissioning of 2 Mtr CAT6 Shielded Patch Cord

Supply of Bi-Di SFP module in Pairs

Installation and commissioning of Item No 32

Supply, Installation and commissioning of suitable fiber Patch cords

Supply, Installation and commissioning of Surge protecting devices for data lines (LAN)with Metal Body

Supply, Installation and commissioning of Surge protecting devices for power

Supply of 55" Display Monitors along with wall mount unit.

Installation and commissioning of Item No 37

Supply of Hot dip Galvanized Pole of 1.5 mtrs for installing the PTZ cameras including mounting accessories, and fixing structure.

Installation and commissioning of Item No 39

Supply of 9U rack for terminations in the field with IP-54 or better compliance

Installation & commissioning of Item no 41

Supply of 12U rack for terminations in the field with IP-54 or better compliance

Installation & commissioning of Item no 43

Supply of 42U x 19" standard rack for network components and CCTV servers, network switch and PDB etc.

Installation & commissioning of Item no 45

Supply of 6core 9/125 micron SM fiber optic armoured cable

Supply of Armoured shielded cat6e cable (roll of 305 Mtrs)

Supply of CCTV Power Cable 2.5 sq. mm

Supply, Installation &commissioning of 1" HDPE Pipe

Splicing of fiber core and terminations

Supply, Installation and commissioning of JB with DIN rail for installation of SPDs

Supply of Step Type-Ladder

Supply of Self Supported Cum Extension Ladder

Supply of Battery Operated Vehicle for Maintenance of the CCTV system

Supply, Installation and commissioning of PVC Conduit flexible 25mm

Supply, Installation and commissioning of PDB's

Supply Installation and commissioning of MCB's

Supply of Network switch-12 port, POE+ managed Layer 2 with four SFP ports

Supply of IP Based Horn Speakers

Installation and Commissioning of Items No 60

Supply & installation and commissioning of SIP Mike

Supply of 6mtr high Hot Dip Galvanized HR Steel Sheet (3 mm thick) Octagonal street light pole having bottom of 130 mm A/F, top 70 mm A/F including provision for mounting of camera at 5 mtrs and double arm bracket for fixing of two nos of 40W LED fixtures at a height of 6 mtrs with Foundation Bolt Sets ( Each set contains 4 numbers of foundation bolts), Double Arm Bracket of arm length 1mtr for LED lights and double arm bracket of arm length 1 mtr. for camera mounting.

Installation and commissioning of item no 63

Supply of Suitable size FRP termination box. Each FRP box Shall have 10A MCB for each fixture and 4 nos. of FRP base connector for the cable termination for 25 Sq.mm Cu cable.

Installation and commissioning of item no 65

Installation and commissioning of item no 67

Supply of LED street light fitting of 40w having System Efficacy of 115 lm/W, system output of 4700 lumens, THD <10%, Power Factor >0.95, CRI >70, CCT 5700K, Full IP 66 protected single piece die cast aluminium housing having PC with Impact resistance IK08, Life L70B50 @ 50k hrs. LED driver should be Potted & Encapsulated. BIS compliant driver should sustain 440V Stress Voltage protection for 8 Hrs., High Cut off : 325V(+/- 15V) and should have feature of Auto Restart, EMC -EMI compliant. Driver shall have 4KV Surge protection and feasibility of 10KV external SPD housed in Luminiare. Similar to Philips Cat no:BRP056 LED47 CW SLF PSU S1.

Installation and commissioning of item no 69

Supply of Power cable upto working voltage 1.1KV as per BIS 7098 (Part-1)-1988.

Power cable ( 2XWY ( P ) ) of size 4C x 25Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 Type), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

Power cable ( 2XWY ( P ) ) of size 3.5C x 50 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with inner sheath and outer sheath FRLS PVC (ST-2 Type), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

3C x 1.5 Sq.mm Unarmoured Copper Flexible cable

Underground Laying and Dressing of Power cables upto working voltage 1.1 kV as per IS 1255 - 1983.

Power cable ( 2XWY ( P ) ) of size 4C x 25 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath ZHLS of extruded PVC type ST2( P ) and ST2(Y), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

Power cable ( 2XWY ( P ) ) of size 3.5C x 50 Sq.mm, Annealed copper conductor, Multistranded, round wire Armoured, XLPE insulated, cores laid up with HR PVC type inner sheath and outer sheath ZHLS of extruded PVC type ST2( P ) and ST2(Y), of 1.1 kV grade as per IS 7098 ( part - 1 ) 1988.

3C x 1.5 Sq.mm Unarmored Copper Flexible cable

Supply of weather proof, Brass, double compression type cable glands suitable for cable of following sizes.

4C x 25 Sq.mm, Multistranded, round wire armoured, XLPE insulated, Copper conductor

3.5C x 50 Sq.mm, Multistranded, round wire armoured, XLPE insulated, Copper conductor

Supply of Copper Lugs suitable for cable/ conductor of following sizes

3.5C x 50 Sq.mm, copper, Ring type

4C x 25 Sq.mm, copper, Ring type

3C x 1.5 Sq.mm, copper, Ring type

3C x 1.5 Sq.mm, copper, Pin type

Glanding and End Termination of power cable of following sizes

3.5C x 50 Sq.mm, copper

4C x 25 Sq.mm, copper

3C x 1.5 Sq.mm, copper

Excavation in all type of soils of width as specified in the technical specifications as per the size and the no of runs and a depth of 1500 mm below ground level, crushed sand bedding, Laying of baked bricks on side and top, back filling, dewatering, consolidation shoring, disposal of excess earth. Item includes supply of crushed sand sand and class - I bricks.

Supply, laying and fixing 250 mm dia RCC pipe NP2 class( light duty ) inclusive of road cutting of width 800mm and depth 1000 mm complete with RCC collars, jointing with cement mortar 1:2( 1 cement: 2 fine sand ), 100mm thick encasing the pipe with concrete of 1:2:4 grade, backfilling and concreting (1:2:4 ) with M30 grade of 200mm thick and as per the attached drawing.

Supply, Fabrication and Installation of Standard steel sections Hot dip galvanized as per grade B0 for cable support and chamber over. Fabrication shall include drilling, entitling, welding, wire brush cleaning, supply of all consumables like gas, welding rods

Supply and Assembling of Fibre glass reinforced Plastic mobile telescopic ladder with Type IA duty rating of height 25 feet as per the attached technical specification

Supply and embeddment of 40 mm dia. G.I. pipe (medium class) in pole foundation (during casting) separately for cable entry and cable exit including bending the pipe to the required shape complete as required

Supply of 8 SWG stranded, flexible G.I wire for street light pole earthing.

Laying of 8 SWG stranded, flexible G.I wire in 25mm dia G.I. pipe electrode buried in ground at minimum depth of 1000mm for street light pole earthing including end connection, excavation and re- filling etc as per instructions by Engineer-In-Charge.

Supply, Installation and Commissioning of Copper Earth Plate 600 mm x 600 mm x 3 mm thick of high grade quality including accessories and providing PCC enclosure with Chequered cover plate hot dip galvanised having lifting lug and locking arrangement and watering pipe of 2.7 metre length with charcoal / coke and salt as per IS 3043 standard, technical specification and drawing.

supply and embeddment of 25 mm dia GI Pipe electrode (Medium Class) for individual pole earthing

Providing and fixing Rough Shahbad Stone of minimum 50 mm average thickness of size 600 X 600 mm (Approximate) over 150 mm thick (consolidated thickness) stone dust backing including setting in position in footpath to the required level and line Pointing with C.M 1:4 (using crushed sand). Joint shall be 20 to 25 mm wide including filling of joints with cement mortar and making grooves etc. complete as per the direction of Engineer-incharge

Removal of Rough Shahbad Stone of minimum 50 mm average thickness of size 600 X 600 mm (Approximate) over 150 mm thick (consolidated thickness) stone dust backing as per the instruction of EIC.

Murum Filling under floors of specified thick in layers of not more than 150 mm thick including supplying required materials and consolidation etc. complete (Murum to be brought from out side campus of BARC).

Supplying, Stacking and Laying of 230 mm Thick rubble Soling stones as under Floor base including packing with smaller stone and compacting, ramming including spreading and consolidation of blinding material, moorum etc. Complete all as per specifications and as directed by the Engineer-in- charge.

Providing and laying in position cement concrete of 1:2:4 (1 cement, 2 crushed sand, 4 graded stone aggregate of nominal size 20 mm) including consolidation, finishing curing etc. complete as per specification and drawings, but excluding the cost of form work shuttering, centering and steel reinforcement Up to PLINTH LEVEL complete.

Providing and laying in position Reinforced Cement concrete (RCC) OF Grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including Admixtures of approved Brand and quality (Plasticizer or super plasticizer) if required, including weigh batching, Mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. Complete but excluding the cost of centering, shuttering, and reinforcement complete as per specification up to Plinth Level (Cement Concrete M-30 Grade nominal size 20 mm metal.

Providing Reinforcement steel for reinforced cement concrete at all levels including supplying, preparation of bar bending schedules, cutting, bending, transporting, fixing, tieing in position with 1.6 mm dia soft drawn annealed binding wire all labour charges, cost of cover blocks in specified grade of concrete etc. complete including cost of binding wire as per specifications and drawings. Using TMT Bars of specified Grades of all Sizes. TMT bars to be supplied by the contractor SAIL, RINL, JSW or TATA make only. Steel Supplied by the Contractor

Providing, centering, shuttering Form work by using steel plates, timber planks for all types of structures including necessary strurtting, proping, staging, supports etc and deshuttering the same after the specified time all as per drawings and specifications at all levels.

Supply installation and commissioning of 100 mm * 50 mm GI Perforated tray

Laying and dressing of all cables in cable tray

CCTV Fail over server with license

2 Year comprehensive warranty of all components

ELECTRONICS CORPORATION OF INDIA LIMITED

BHARAT ELECTRONIS LTD

TECHNOCRATS SECURITY SYSTEMS PVT LTD