Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.0 LAccepted-AOC CIVIL HOSPITAL ROAD CHC ROAD BARWALA HISAR 125121 | BARWALA | HISAR | HARYANA | 125121 | L1 | Accepted-AOC lowest | |
| 2 | L2₹13.7 L+₹60,430.74 (4.61%)Rejected-AOC BHIWANI | BHIWANI | HARYANA | 127021 | L2 | Rejected-AOC H | |
| 3 | Rejected-Technical CIVIL HOSPITAL ROAD BARWALA DISTT HISAR | HISAR | HARYANA | 125001 | - | Rejected-Technical Disqulified | |
| 4 | Rejected-Technical 299 MODEL TOWN ADAMPUR HISAR HARYANA 125052 | HISAR | HARYANA | 125052 | - | Rejected-Technical Disualified |
| Sl No | Description | Qty | Unit | THE BARWALA GOODLUCK CO OP L C SOCIETY LTD L1 | MANOJ KUMAR CONTRACTOR L2 |
|---|---|---|---|---|---|
| 1.00 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.......... | 1 | Each | 1,81,000 ₹1,81,000 Lowest | 1,89,000 ₹1,89,000 |
| 2.00 | Basic cost of Supply and Erection of 3Mtr. Decorative Pole with Post Top LED light of 30 watts complete in all respect as per drawing new | 12 | Each | 11,000 ₹1,32,000 Lowest | 12,000 ₹1,44,000 |
| 3.00 | Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge. | 1 | Each | 13,200 ₹13,200 Lowest | 14,000 ₹14,000 |
| 4.00 | Supply of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent)- | 115 | Metre | 8.2 ₹943 Lowest | 9 ₹1,035 |
| 5.00 | Providing and fixing of Shoulder and
Chest Press Combo made up of 4inch B
class GI pipe: Prime Stand duly bend,
Foundation center pipe.The handle frame
is made of 42mm OD G.I. pipe.The
remaining frame is made of 32mm OD
G.I. pipe. Seating frame support of
dimension 250 x 150 x 5mm is welded for
supporting the pedal seat. MS Seat of size
380mm x 300mm x 5mm is used for
supporting the foot. ?? 60mm seamless
pipe bushes. Permanent lubricated Ball
bearings 6205zz/6205-2rs. Foundation
plate of dia ??225mm and 10mm
thickness is welded at bottom. | 1 | Each | 31,500 ₹31,500 Lowest | 33,000 ₹33,000 |
| 6.00 | Providing and fixing of Leg Press Dual
equipment made up of 4inch B class GI
pipe: Prime Stand duly bend, Foundation
center pipe.60mm seamless pipe
bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.
High quality rubber grip are also used for
firm handling.High tensile steel with
galvanized nut and bolts to be used.The
Circlips to be used are of 25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | 22,500 ₹22,500 Lowest | 23,500 ₹23,500 |
| 7.00 | Providing and fixing of Seated Rowing
equipment made up of 3inch Bclass GI
pipe: Prime Stand duly bend, Foundation
center pipe.The pins used are made up of
25mm hardened bright bar.Permanent
lubricated Ball bearings 6205zz/6205
2rs.All welded joint are of good
quality.High quality rubber grip are also
used for firm handling.The bushes
(Stopper) used to avoid the collision.High
tensile steel with galvanized nut and bolts
to be used.The Circlips to be used are of
25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness | 1 | Each | 18,000 ₹18,000 Lowest | 19,000 ₹19,000 |
| 8.00 | Providing and fixing of Double Twister/
Standing Twister equipment made up of
3inch B class GI pipe: Prime Stand duly,
Foundation center pipe.60mm seamless
pipe bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.High tensile steel
with galvanized nut and bolts to be
used.The Circlips to be used are of
25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | 17,900 ₹17,900 Lowest | 19,000 ₹19,000 |
Tender Value
₹12.5 L
EMD Value
₹25,030
Closing Date
25 May 2026, 5:00 pmClosed
SH ANIL MOHIL
Municipal Committee Barwala
Recall Completion of old thana park ward no 3 M C Barwala
2026_HRY_522732_1
2026126C3964 80FD 46F7 A35E 4F4B55DECB7E345ULB
Open Tender
Civil Works
Works
120 days
Barwala
Recall Completion of old thana park ward no 3 M C Barwala
2 documents required · 2 mandatory
₹1,500
₹25,030
Yes
19 Jun 2026
19 May 2026
26 May 2026
19 May 2026
25 May 2026
19 May 2026
19 May 2026 - 21 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Multiplay Station jhula with size 27*15*13ft with 1 Nos climber/Height Gainer, 2 Nos Canopy of 4mm thick, 6.5 ft long Spiral Slider of 6mm thick, 10 ft long Wave Slider of 6mm thick, Tunnel 5 ft long of 4mm thick Etc. with 3” sq. pipe, 1.6” sq. pipe, 3”*1” sq. pipe, 8mm chain with two Nos Chain Swing Sheat Jhula with 2 Nos. Sq. Doom.......... | 1 | Each | - | - |
| 2 | Basic cost of Supply and Erection of 3Mtr. Decorative Pole with Post Top LED light of 30 watts complete in all respect as per drawing new | 12 | Each | - | - |
| 3 | Supply, erection, testing and commissioning of 3 phase Automatic timer AMSons/LandT/Indoasian/CandD make to ON/OFF the street light on different fixed timing maintainable on street light pedestal, pillar, wall M.S. pedestal where ON/OFF point is available, cabinet is fabricated from 22 gauge, painting, wiring, connection ON/OFF from bottom of the cabinet, 3 contractors 25 Amp, 24 volts D.C. each 2 transformers, rectifier system, switching system, Bakelite contractor, 32 Amp, MCB, 32 amp Havells digital timer Auto/Manual system, time setter, fiber sheet, rubber, and plastic component, wiring and component fitting, chemical (Epoxy) the job includes allied material, labour, erection, testing and commission at site including cost of material complete in all respect up to the entire satisfaction of Engineer-in-Charge. | 1 | Each | - | - |
| 4 | Supply of PVC sheathed aluminium flexible cable in existing pipe/trench etc. of size 1.5 sq mm 2 core for working voltage up to 1100 volts conforming to IS1554 (Part-1) 1988/7098 (Part-1) with aluminium conductor ISI marked complete in all respect as per standard specification up to the entire satisfaction of Engineer-in-charge (Make: - Grandlay| Havells| KEI or its equivalent)- | 115 | Metre | - | - |
| 5 | Providing and fixing of Shoulder and
Chest Press Combo made up of 4inch B
class GI pipe: Prime Stand duly bend,
Foundation center pipe.The handle frame
is made of 42mm OD G.I. pipe.The
remaining frame is made of 32mm OD
G.I. pipe. Seating frame support of
dimension 250 x 150 x 5mm is welded for
supporting the pedal seat. MS Seat of size
380mm x 300mm x 5mm is used for
supporting the foot. ?? 60mm seamless
pipe bushes. Permanent lubricated Ball
bearings 6205zz/6205-2rs. Foundation
plate of dia ??225mm and 10mm
thickness is welded at bottom. | 1 | Each | - | - |
| 6 | Providing and fixing of Leg Press Dual
equipment made up of 4inch B class GI
pipe: Prime Stand duly bend, Foundation
center pipe.60mm seamless pipe
bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.
High quality rubber grip are also used for
firm handling.High tensile steel with
galvanized nut and bolts to be used.The
Circlips to be used are of 25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | - | - |
| 7 | Providing and fixing of Seated Rowing
equipment made up of 3inch Bclass GI
pipe: Prime Stand duly bend, Foundation
center pipe.The pins used are made up of
25mm hardened bright bar.Permanent
lubricated Ball bearings 6205zz/6205
2rs.All welded joint are of good
quality.High quality rubber grip are also
used for firm handling.The bushes
(Stopper) used to avoid the collision.High
tensile steel with galvanized nut and bolts
to be used.The Circlips to be used are of
25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness | 1 | Each | - | - |
| 8 | Providing and fixing of Double Twister/
Standing Twister equipment made up of
3inch B class GI pipe: Prime Stand duly,
Foundation center pipe.60mm seamless
pipe bushes.Permanent lubricated Ball
bearings 6205zz/6205-2rs.All welded
joint are of good quality.High tensile steel
with galvanized nut and bolts to be
used.The Circlips to be used are of
25mm.
Allen Bolts are also used to tighten the
closing cap.
Closing cap of HDPE / PPCP Plastic is
used.
The powder coating done with Pure
polyester powder with 60 to 70 micron
thickness. | 1 | Each | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.86 MB
BOQ_601656.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .