Operation and Maintainance of UGD line STP and SPS at Gokak CMC for the year of 2026-27

Operation and Maintainance of UGD line STP and SPS at Gokak CMC for the year of 2026-27

Clearing and grubbing land including uprooting rank vegetable grass, bushes, shrubs, saplings and trees upto 300mm girth by manual means, in areas of light jungle, removal of stumps, disposal of unser...

Removing, Repairing, Overhauling and refitting Aerator with 5HP Motor at STP including Winding replacing O ring, Mechanical seal, Ball bearing, greesing, emplor, incoming and outgoing shaft, rubber an...

Removing, Repairing, Overhauling and refitting Aerator with 7.5 HP Motor at STP including Winding replacing O ring, Mechanical seal, Ball bearing, greesing, emplor, incoming and outgoing shaft, rubber...

Cleaning of sewer line by Rodding Equipment for dia above 150 mm.(While cleaning septic tank all safety and precautionary measures to be taken,Standard Operating Procedure to be adopted and PEMSR Act ...

Removing the burnt out supporting insulator from motor of main side Supply and fixing of new insulator to same place as original. (Vol-5/P.No.230/19.24)

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, hand leand wiring complete. Protection of O...

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board. (Vol-6/P.No.18/I.No.5.20.10)

Supplying and fixing HRC fuse units base on existing switch /panel board. 32 to 63 Amps (Vol-6/P.NO.15/5.9.2)

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20 (Grade), c...

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

Repairs to Machinehole for different depths including removal of debris, levelling the brick masonry, construction of brick masonry upto Ground level, providing CC coping alround the MH cover, plaster...

Providing and constructing of Machinehole chambers conical in shape at top with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15m alround the ch...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...