Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.8 LAccepted-AOC ROOM NO 220 2ND FLOOR DEVGIRI BUILDING NO 65 B LALLU BHAI COMPOUND MANKHURD MUMBAI 400043 | MUMBAI SUBURBAN | MAHARASHTRA | 400043 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹20.2 L+₹45,181 (2.28%)Rejected-AOC | L2 | Rejected-AOC NOT LOWEST | |
| 3 | L3₹21.1 L+₹1.3 L (6.65%)Rejected-AOC 1ST FLOOR SIDDHI PUJA BUSINESS SQUARE SONY PAITHANI CHOWK NASHIK MAHARASHTRA INDIA PIN 422 002 | NASHIK | MAHARASHTRA | 422002 | L3 | Rejected-AOC NOT LOWEST | |
| 4 | L4₹21.5 L+₹1.7 L (8.57%)Rejected-AOC 19 AIRVIEW APARTMENT VAKOLA BRIDGE NEHRU ROAD SANTACRUZ EAST MUMBAI 400 055 | MUMBAI SUBURBAN | MAHARASHTRA | 400055 | L4 | Rejected-AOC NOT LOWEST | |
| 5 | L5₹21.8 L+₹2.0 L (10.1%)Rejected-AOC TULSI ASTHA FLAT NO 1 PLOT NO 54 SECTOR 12 VASHI NAVI MUMBAI THANE 400 703 | THANE | MAHARASHTRA | 400703 | L5 | Rejected-AOC NOT LOWEST |
Tender Value
₹29 L
EMD Value
₹59,000
Closing Date
28 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) MANKHURD
GE (NW) MANKHURD,MUMBAI-400088
ADDN/ALTN AND SPECIAL REAPIRS TO P-34 NSB, MANKHURD UNDER GE (NW) MANKHURD
2022_MES_550594_1
8168/E8
Open Tender
Civil Works
Item Rate
210 days
GE (NW) MANKHURD
AS PER NIT TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (NW) MANKHURD
₹59,000
Yes
21 Nov 2022
7 Sept 2022
30 Sept 2022
7 Sept 2022
28 Sept 2022
21 Sept 2022
Amount
Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets
Taking down cement or cement lime plaster of any description on brick or stone walls, including raking out joints, hacking for keys, scubbing down with water, etc. including all necessary scaffolding as required and rubbishing off the premises, etc. complete all as specified and as directed by the Engineer-in-charge
M&L for Ready mix plaster 20mm thick (12+8mm) on fair faces of bricks or concrete surface including necessary scaffolding upto 24m height etc complete all as specified and directed.
M&L for 8 to 10 mm thick polymer modified ready mix cement based plaster on surfaces of walls/ceiling including finishing the surface even & smooth without using extra cement, complete all as specified and as directed. Make : Easy plast from M/s wall plast or chemplast or Readiplast from ultratech. Note: The thickness of plaster specified above is the minimum thickness and the quoted rates shall also be deemed to include for provision of dubbing of the surfaces with the ready mix plaster and nothing extra shall be payable on this account.
M& L rendering 5 mm thick in CM 1:3 on ceiling surface finished even & smooth with sagol finish complete all as specified.
M& L for preparation of new / old existing surfaces by scraping, washing rubbbing etc surface of walls ,chajjas, soffits & beam including necessary scaffolding and applying one coat of exterior cement based water proofing putty (brand Apex Ultima manufactured by Asian or Brand weather coat Maxx manufactured by Berger or equivalent as approved by GE) building ht upto 24mtr complete all as per manufacturers instructions
Chipping, removing carefully loose/damaged concrete incl plastering (total thickness upto 60mm ) from RCC surfaces of columns, beams,Chajas, soffits of slabs etc by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land, even including necessary scaffolding up to 24 m height complete all as specified Note: Hard concrete shall not be removed by force.
M&L for Epoxy bond coat of Make Fosroc (NITOBOND-EP) OR EPOXY BONDING AGENT of Dr. Fixit OR equivalent of M/s. Krishna Conchem as approved by GE over exposed concrete surfaces prior to application of any type of mortar to ensure bond between old concrete & new concrete by brush application even including necessary scaffolding up to 24 m height complete all as specified
M&L for cleaning existing reinforcement by sand blasting with suitable pump as directed by the GE and wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hr between the coats, complete all as specified and directed. (Note :- Mode of measurement: superficial area of concrete will be measured.)
M&L for Anticorrosive Treatment to Reinforcement using Corroseal - ZR of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces, complete all as specified and directed . Note:- Mode of measurement: superficial area of concrete will be measured.
M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 20mm thickness including levelling, profiling etc even including necessary scaffolding up to 24 m height complete all as specified
M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Monolith-PMM) OR Polymer mortar HB of Dr Fixit, while the bonding agent is still tacking upto 40mm thickness including levelling, profiling etc in two layers, each layer not exceeding 20mm,even including necessary scaffolding up to 24 m height, complete all as specified
M&L for providing TMT bars any dia in various structural RCC elements like columns, beams, Slabs etc. including cutting, bending, fixing of bars with welding/ tying as required at site with & including binding wires etc. and all relevant works like anchoring of the bars in the existing RCC Members, complete all as specified and directed.
M&L for preparation of newly plastered surfaces of celings and applying three coats of white wash complete all as specified.
M&L for preparing new plastered surface of walls, and applying two coat of Distemper oil emulsion over a coat of putty 3mm thick complete all as specified and directed
M&L Preparation of old plastered or un-plastered surface of wall and applying two coat of distemper oil-emulsion of white or tinted and over a coat of putty 3mm thick complete all as specified and directed.
M&L for leak/seapage proof coating consisting of preparing the surfaces of Newly plastered or existing exterior walls, parapet walls chajjas etc, with wire brush to remove all loose dirt, oil grease etc, and filling cracks above 5mm thickness with Dr Fixit Pidicrete URP or with plaster seal of STP Ltd and cracks less than 5mm with Dr Fixit Crack X powder or with plaster seal of STP Ltd and applying one coat Dr Fixit primeseal primer or STP Ltd (and allow to dry for 8 hrs) under torch dry condition and subsequently two coats of water proof decorative elastomeric coating system; of Dr Fixit Raincoat with DFT 100 microns or shalicry 215 of STP(The surface after painting one coat shall be allowed to dry at 6 hours befor next coat) etc, complete all as per manufacturer instruction and all as specified and directed.
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.
M & L for Coloured Glazed ceramic tiles in vertical surface 350 x 250 mm x 7 mm / 450 x350x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match 10mm thick rendering in CM 1:4 as in backing coats of tiles finished the surfaces rough to receive tiles etc complete all as directed and specified.
S&F Vitrified light shade ceramic tiles 10 mm thick (square/rectanglar) polished area of each tile not exceeding 0.36 sqm ,in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to matched laid over 15mm thick badding layer of CM 1:6 complete all as specified and as directed.
All as per items No 21 above but in skirting or in dado including 10 mm thick rendering CM 1:4 complete all as specified and directed
Demolition of lime concrete or lean concrete from sunken floor including floor tiles, hacking of surfaces after cleaning with wire brush (floor and adjoining walls) and disposing off debris outside MOD land complete all as specified and directed.
M & L for filling of lean concrete 1:5:10 type E2 (using 40 mm graded stone aggregates ) in sunken portion, as per requirement complete all as specified and directed.
M&L for PCC 1:2:4, type-B, using 20mm graded stone aggregated as in sub base of floors and for any other propose in any location mixed with WPC @ 2% by weight of cement, complete all as specified and directed. Note: Supply only WPC will be measured and paid separately.
M & L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages : Stage 1: Providing 15mm thick plaster in CM 1:3 mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :(i) Mode of measurement: Actual area treated (floor and adjoining walls) will be measured and paid . (ii) The above treatment shall be got executed through applicator of manufacturer and necessary authenticated documents on account of above shall also be produced by the contractor.
Taking up or down steel water tubing and connections of size 15mm bore, complete all as specified and directed.
Taking up or down steel water tubing and connections of size 20mm bore, complete all as specified and directed.
Supply and fixing of 20 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed.
Supply & fix 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
S&F in repairs cast iron Nahani trap 100mm dia out let including grating connecting jointing to waste pipe with lead jointing and taking out existing unserviceable traps by hacking out concrete joints and making good of surfaces complete all as specified and as directed .
S&F PVC connections 15mm size with PTMT nuts of length 600mm
S&F in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule fancy type chromium plated.
S&F in repairs pillar taps; of cast copper alloy with capstan; head chromium plated screwed downend with pressure with or without lettered hot or cold with long screwed shank and fly nuts, screwed for iron pipe& fixed complete all as specified
S&F in repairs hand shower (health Faucet) with 8mm dia 1 mtr Long easy flex tube in chrome finish & wall hook complete all as specified .
S&F in repairs angular concealed stopcock with wall flange fitted by 15mm bore complete all as specified and as directed
Supply and fix in repair 10 ltr, PVC, valveless, syphonic action type, flushing cistern, low level/ high level including inlet, ball valve, float and handle including brackets with and including PVC flush pipe 32 mm bore, connecting to WC etc, complete all as specified and directed.
S&F towel rail 600mm long fixed with and including chromium plated brass screws and wooden/plastic cleats (Min wt 190 gms)
S&F in repairs PTMT grating doom 125mm dia of size
S&F in repairs two way Bib cock long body with wall flange fitted by 15mm bore complete all as specified and as directed
M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. is approved by GE
M & L for Machine cut cudappah stoneslab 18-20mm thick over cementscreed base, laid and mixedwith pigment to match the shade of the slab window cills and jambs to full thickness of wall fixed in steps over cement screed bed 10mm thick in CM 1:4 and jointed with grey cement paste and slurry including rubbing and polishing complete all as specified and directed
Dismantling cast iron or reinforced concrete drain pipes , water pipes (any size or pattern ) including all fittings, balance under credit ( measure overall as fixed along the centre line over fitting and accessories ) all as specified and directed.
S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls all complete all as specified and directed.
All as per item no. 44 above, but 75mm bore
S&F in repairs Vitreous china wash down water closet pan “Pedestal Pattern” coloured with wc seat cover coloured closed pattern with flat bottom and mild steel chromium plated or aluminized hinging device including pvc flush pipe and joints etc and connection to drain, flushing, pipe, anti- syphonage pipe, and fixing arrangements with fixing bolts etc ,complete all as specified and directed
S & F in repair Vitreous China Half stall (full) urinal White complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete all as specified and directed
S&F vitreous china, counter wash hand basin oval shape size( 420x420mm x135 mm) fixed on granite counter down slab including brass chromium plated full threaded waste coupling with grating 32mm dia pvc waste pipe including removing old wash basin complete all as specified and directed. (Note: Granite slab, RCC plat form, brick wall support etc shall be measured and paid separately)
S&F Urinals valve auto closing system with built in control cock &wall flange ( pressmatic) long screwed shanks and fly nut screwed for 15 mm bore pipe, complete all as specified and as directed
Removing plant/growth including its roots upto 1.00m of plant height at any location/at any storey and of any description and treating the surfaces with Acid (HCL) and making good surfaces with cement mortar 1:4, complete all as specified and directed.
S&F 110mm bore PVC (SWR) branch piece 110 mm dia bend
S &F PVC (SWR) bends, 75 mm bore, any radius
S &F PVC (SWR) junction single(single T), 110 mm bore, equal or unequal
S &F PVC (SWR) junction single(single T), 75 mm bore, equal or unequal
M & L for 18/19 mm thick particle board, interior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) Sqm but not exc 1.5 Sqm each including complete all as specified and directed.
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2010 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made
S&F Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing
Factory Made Solid PVC Moulded Door Shutter with particle board core , 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face
S&F 100 mm long stainless steel butt hinges fixed with stainless screw
S&F aluminum anodised barrel tower bolts of extruded section of size 150 mm length
S&F 150 mm extruded aluminum alloy handles, fabricated type anodised
S&F aluminum anodised sliding door, bolts with hasp and staple ( bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminum alloy, length of bolts 250 mm.
M&L PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in hold fast, bed plate etc including necessary form work complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.
S&F mild steel work as in posts or struts of fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, including all necessar drilling, bolting or riveting etc conforming to Fe- 290 Gde E-165.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 gde E
Dismantling Asbestos cement (corrugated, semi corrugated, etc sheets in roof coverings complete all as specified and directed.
S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
S & F Stainless Steel railing, baulster, hand rail, pole with 304 grade with any dia, including cutting hole on any surfaces and fixing with cement mortar and araldite , complete all as specifed and directed as Engr in charge. ( design , dia, bent,shape,approval by GE)
M& L for preparation of new steel and iron surfaces of any description , over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a priming coat of red oxide zinc chrome, complete all as specified and directed.
S&F rolled sections as in brackets for resting of chajjas and similar work, conforming to Fe 410 -W (Gde-E-250, quality `B') and including all relevant works, complete all as specified and directed. (upto 12.0m height of bldg or 5 storey bldg)
Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.
M&L for PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in levelling course over RCC roof surface to achieve required slope, benching etc including making rounded or chamfered on edges mixed with WPC as per manufacturer's instructions, complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.
M&L for screed bed 10 mm thick on brick work or concrete surfaces finished even and fair in cement plaster 1:4, complete all as specified and as directed with mixing water proofing compound.Note:( wpc shall be measured and paid separately)
M & L for providing and carry out waterproofing treatment to sound, moisture free concrete surface using liquid applied single component pitch free polyurethane coating of Dr Fixit Flexi PU 270(I) /Sikalastic 853R AP/ Nitoproof 600 PF with avg thicknessn 1.5-2.0mm capable of bridging substrate cracks upto 2mm system includes proper surface preparation to remove loose dirt, loose mortar, curing compound etc., carry out cementitious injection grouting at leakage points and construction joints using cement slurry modified with plasticised expandive grout admixture supplied in 225 gm pouch, application of polymer modified vatta at floor wall junction, filling of annular space around rain water outlet using free polyurethane coating capable of bridging substrate cracks upto 2mm , coverage @ 2.0kg/sqm to achieve 1.5mm thickness in two coats followed by laying of seperation layer of 200 gsm non woven geotexiles layer before carry out protection screed etc. complete including all tools and tackles as per manfuctures specification and work will be executed through company application only (Cost of apllicator also included) All as specified amd completed MAke : ASian paints/ PIdilite/ Sika/Stp/Fosroc
M&L Plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or brads Exc 13 & n. exc 25 sq. cm
S&F 12 mm thick entrance glass door at alley way with one way visibility , locking arrangement necessery unit insignia embossed (unit symbol)on glass as per sample approve by user unit with all fitting and fixtured complete of and glass partition above shutter to roof level inculiding fancy type handle , locking arrangement , springs , door closer and aluminium frame work inculiding suitable beading and with necessary electrical fittings etc complete all as specified and directed .Note: Quoted rate shall be inclusive of aluminium sections
Taking down existing aluminium joinery of any description (frame/ shutters) with all fittings (but excluding grills) complete all as specified and directed.
S&F standard aluminium anodized section (minimum thickness of anodizing shall be 15 micron) as in frame, shutters for doors, window / ventilators, fixed / openable / sliding or in any pattern, cut of size, jointed with cadmium plated steel screws, incuding rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, rooler, Nylon ball bearing etc complete all as specified and directed. (Aluminium section shall be of make Jindal/ Hindalco/ Indalco) Note:- Weight of aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. Cost of other items / accessories required for entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, wire-cloth shall be measured and paid separately as supply only under respective item
supply only sheet glass 5 mm thick quality fixing to wooden /aluminium frame door/ window shutters in any position with new beads/ steel section as required for securing including dismantling of old jalli and painting to match with existing complete all as specified and as directed.
M&L for 12mm thick block board provided with and including 3mm thick veneer sheet pasted on top side of block board (venner sheet shall be made of 1st quality and need to be polished minimum 2 times and better finish) ,Fixed with screws to frame work, complete all as specified and directed, Note: the design and specifications of the above item (including of materials) shall be got approved by the contractor from the GE before procurement
S&F 100 mm long brass Mortice lock, vertical type,complete all as specified and as directed
M & L for brick work in CM (1:6) using sub class 'B' bricks strainght or or curved as curved as required on plan exc 6mtrs mean radius etc.
Supply and fixing GI frame for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm & 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre / intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, provision of hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long, also including provision of 12/12.5mm thick Gypsum Board in ceiling fixed with screws as per manufacturer's instructions, jointing and finishing to flush finish to tapered and square edges of the board and lastly finishing the exposed surfaces of the board with two coats of Royal Paint from Asian Paints or equivalent brand of Berger or Johnson as approved by the GE over 1 coat of primer, complete all as specified and directed. Note : (i) The contractor's quoted rates shall be deemed to include provision of frame work, Hangers, Gypsum Board, jointing and finishing to a flush finish to tapered and square edges of the board, painting of the board, making cutting/ opening to the required size/ shape for fixing of light fittings, provision of necessary scaffoldings and all other relevant works required for entire completion of the work to the satisfaction of the GE. (ii) The design and height of the ceiling at various locations shall be as directed by the GE and the contractor's quoted rates shall be deemed to include the above element also.
M&L for 35 to 40 mm thick machine cut, prepolished cuddappa stone slab as in plateform for fixing oval shape wash hand basin(including cutting the slab to oval shape to accomdate the WHB), pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of stone slab etc,also including moulding/rounding to edges of the slab, complete as specified and directed.
M&L for 20 to 22 mm thick Black Jet, premium quality, Granite Slab (table rubbed and polished) as in plateform for fixing sink etc (including cutting the slab to oval shape to accomdate sink etc), pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc,also including moulding/rounding to edges, laid over and including 15mm thick cement mortar 1:4 screed, complete as specified and directed.
M&L 40 mm thick Cement concrete type B1, 1:2:4 (using 20 mm graded aggregate) as in subbase of flooring complete all as specified and as directed
Surface dressing n.exc 15cm deep and getting out in soft and loose soil.
M&L 75 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded aggregate) as in sub base of flooring complete all as specified and as directed
M&L 40MM thick Rough dressed sand stone slab flooring, laid dry but jointed and pointed in cement mortar 1:3 over screed bed or bedding layer of morar 20 mm in cement mortar 1:6 , (design and colour os stone as per direction given by GE) complete all as specified and as directed
Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators, sockets etc) and making good disturbed suface of wall, floors, ceiling etc all as specified.
Taking down complete main switches/DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed.
M & L for point wiring complete with proper colour coding with 1100 Volts grade, 1.5 Sqmm PVC insulated FRLS, unsheathed, wire confirming to IS-694, Part II, ISI marked with multistranded copper conductor drawn in and including PVC concealed conduit of size 20mm dia on wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, including provision of modular metal flush boxes with modular cover plate and frame suitable for mounting modular switches, sockets, fan regulators etc, also including 1.5 Sqmm, PVC insulated, FRLS unsheathed, 1100 Volts multistranded copper conductor green colour as contineous earth wire connected to common earth dolly for one light point/fan/bell point controlled by one way switch, complete all as specified and directed. Note : Rates included for concealed cutting as required at site without any damage and making good in CM 1:4 and matching the surface as required 2 all screws and washer for point wiring shall be Stainless steel. Nothing is extra shall be admisible on this account. Make of conduit :- Sudhakar/ Precision/ Diamond, Make of wire :- Finolex/ Havells/ Polycab/ KEI
All as per ser item No 95 above but for one 2pin/3pin socket outlet 5 Amps on same board complete all as specified and directed.
All as per ser item No 95 but for one 5 Amps 2 pin / 3 pin switch socket outlet multipurpose on Independent Board complete all as specified and directed.
All as per item No. 95 above but wiring complete with 2.5 Sqmm for 3 pin 15 A socket multipurpose on independent board complete all as specified and directed.
M & L modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed.
S&F modular type 2/3 pin combined shuttered type 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.
S&F modular type 2/3 pin combined shuttered typr 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.
M & L modular type 16 A one way SP switch 2 module confirming to IS: 3854-1997 with finguer proof terminal complete all as specified and directed.
M & L modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed.
M & L Modular Bell push flush type 5 amp, 230 Volts complete all as specified and directed.
Supply and fix bell ding dong AC 230 V single pole. complete all as specified and directed.
S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed
S & F Modular cover plate 6 modules
S & F Modular cover plate 4 modules
S & F Modular cover plate 3 modules
S & F Modular cover plate 2 modules
S & F Modular cover plate 1 module
S & F in repairs Ceiling Rose, surface bakelite, three terminals, AC, 230 Volts supply complete.
S & F in repairs MCB DB 8 way SPN, double door,IP - 43 with 200 Amps rated bus bar, AC complete all as specified.
S & F MCB SPN 40 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity complete
S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 50 Hz, 10 KA Breaking capacity complete
Supply & Fix LED batten plastic type fitting of capacity 20W, operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F>0.9, 2.5 KV surge protection, 4-feet long, housing made out of engineering plastic with decorative end caps elegently designed complete all as specified. Make :-BAJAJ CAT No 1830203 or equivalent in JAGUAR / WIPRO / CROMPTON.
Ditto- all same as per items No 116 above but 10 Watt capacity, 2- feet long complete all as specified. Make :-BAJAJ/JAGUAR / WIPRO / CROMPTON.
Supply and fix in repairs LED light fitting of capacity 15 Watts, operating on 230V, 50Hz, AC Supply complete, recessed mounted, with modular surface round panel suitable for glare free lighting made out of engineering plastic having dia 153mm, including provision of 2.5KV voltage surge protection device, P.F > 0.9, lumen efficacy not less than 100lm/watt, CCT-6000K complete all as specified and directed. Make :- BAJAJ cat No 830280 or equivalent in WIPRO/ JAGUAR/ CROMPTON.
S&F in repair/replacement of building Security light fitting 30/35 CCT 4000K, luminus effeciency not less than 110 lm/Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK08 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge. Make :- BAJAJ/ JAGUAR / WIPRO / CROMPTON.
S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge
M & L for Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers all as shown in Electrical Plate No.3 connected to earthing test point all as specified or indicated including testing on completion.
M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through PVC casing caping with and including PVC insulated 4 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly all as specified and as directed Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.
Supply and fix 1200mm sweep, 220 cmm high speed ceiliing fans complete comprsing of aluminium blades three Nos, downrod, dia cast aluminium housing capacitor, suspension hook, canopies, double bolt bearing type, operatating on 230V 50 Hz AC supply complete Make :- Orient Model No Energy sever 49 (Bismonted fan/ISI) or equivalent in BAJAJ/SURYA/CROMPTON
Supply and fix in repairs Exhaust fan 450 mm sweep, operating on single phase, 230V, AC, 50 Hz, supply complete made out steel body with louvers, having speed of 1400 rpm, air delivery 6800 CMH, power output of 410W, with double ball bearing confirming to IS : 374 complete all as specified and directed. Make :- ALMONARD / ORIENT/ BAJAJ
All as per ser item No 2 but for 300 mm sweep having speed of 900 rmp, operating on single phase, 230V, AC, 50 Hz, supply complete made out steel body with louvers complete all as specified and directed. Make :- ALMONARD / ORIENT/ BAJAJ
Supply and fix in repairs Exhaust fan 250 mm sweep, operating on single phase, 230V, AC, 50 Hz, supply complete made out plastic body with louvers, having speed of 1350 rpm, air delivery 500 CMH, power output of 25W, with double ball bearing confirming to IS : 374 complete all as specified and directed.Make :- ALMONARD / ORIENT/ BAJAJ
Supply & fix high speed wall mounting fan 400mm sweep, operating on single phase, 230V, AC, 50 Hz having speed of 2200 rpm, air delivery 100 CMM, power output of 100W star rated along with blade, canopy, mounting brackets, rubber insulator. Make :- ALMONARD / ORIENT/ BAJAJ
Taking down carefully including water servicing of outdoor & indoor which including cleaning of cooling coils, tightning of loose terminations and refixing of same Window and split type AC 1.5/2.0 TR and connected items complete all as specified and directed.
Supply and fix copper tube of size 1/4" bore including brazing etc with rubberised insulation and tape suitable for supply pipes for air conditioners complete all as specified and directed.
-ditto- all as per item No. 131 above but for size 5/8'' complete all as specified and directed.
Supply and fix PVC drain pipe of size 5/8" bore for supply pipes for air conditioners complete all as specified and directed.
Supply and fix 4 core 2.5 sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade ISI marked complete all as specified and directed.
Supply and fix Heavy duty Water Proof Powder coated mounting bracket for installation of outdoor unit of air condiioner made out of 2 mm thick high grade steel with suitable fastener, MS nuts, bolts M8 x 45mm, washer, bolt M8 x 30mm nut, bolts & washers etc. duly painted complete set all as specified and directed. Make :- Companion Sleek, Aircool Sales Corporation or equillant make.
S&F single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 20 Amp 240 Volts complete all as specified including concealing in wall and directed. Make :- Indoasian/Legrand/C&S/Scheinder. Note : A sum of Rs 23,526.00 towards sch of credit shall be deducted to arrive the contract sum.
AM ENTERPRISES
M/s Mohd Altaf Hanif Qureshi
GAJANAN SALES CORPORATION
sahajanand const co.
Parmatma Enterprises
Joy builders
Vishal Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .