Construction of Check Dam across Ponnai River near Veppalai Village in Katpadi Taluk of Vellore District.

Earth work excavation by deploying earth moving machinery including jungle clearance and conveying the same width tippers with a lead of 0 to 100m to the low lying area shown by the departmental officers including levelling etc. complete complying with standrad specificaations and as directed by the departmental officers

Earth work in all soil except hard rock requiring blasting and conveying for formation of bund with an extra lead of 5KMMR of part thereof deploying earth moving machinery and tippers including consolidation by power roller benching, formation of bunds, breaking clods, ramming and sectioning etc., completed as directed by the departmantal officers.

Earth Work Excavation for foundation in all soils and sub soils and to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers. - Open excavation

Earth Work Excavation for foundation in all soils and sub soils and to full depth as may be directed by the Departmental Officers except hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated soil in layers not exceeding 15 cm thick, well rammed and consolidated and depositing including all initial leads and initial lifts, etc., complete complying with standard specifications and as directed by the departmental officers. - Narrow Excavation

Providing and placing in position of plain cement concrete M 10 grade using River Sand and graded hard blue granite broken stone jelly of 40 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers.

for the works below1.50m to 4.50m below ground level

Providing and placing in position of plain cement concrete M 15 using River Sand and hard blue granite broken stone jelly of size 20 mm mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

for the works upto 1.50m depth Below Ground Level and upto 1.00 Height above Ground Level

for the works above 1.50m to 4.50m below ground level

for the works above1.00m to 4.50m height above ground level

Supplying and erecting centering for vertical RCC concrete walls of supply channel, retaining wall etc for following height with necessary supports, all cross bracing with mild steel size of 90 cm x 60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x 25 mm x 3 mm for bearing laid silver Oak / Country wood joist of size 7.50 cm x 5.0 cm spaced @ about 90 cm C / C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C / C etc., complete complying with standard specifications and as directed by the departmental officers

Upto 2.70/3.00 m height

3.00m to 4.00m height

4.00m to 5.00 m height

Providing and placing in position of plain cement concrete M 15 grade using River Sand and graded hard blue granite broken stone jelly of 60% of 40 mm size and 40% of 20 mm size mixing with mixer machine and laying in layers including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick, compacting, consolidation by using vibrators, finishing, watering, curing etc. complete complying with standard specifications and as directed by the departmental officers

for the works upto 1.50m depth Below Ground Level and upto 1.00 Height above Ground Level

for the works above1.00m to 4.50m height above ground level

for the works above 4.50m height above ground level

Providing and placing in position of Reinforced Cement Concrete M 20 using River Sand and hard blue granite broken stone jelly of 20 mm size mixing with mixer machine including the cost of bailing/pumping wherever necessary laying the concrete in layers of not exceeding 15 cm thick excluding form works, centring, shuttering and steel fabrications compacting, consolidation by using vibrators, finishing, watering, curing, etc complete complying with standard specifications and as directed by the departmental officers

for the works upto 1.50m depth Below Ground Level and upto 1.00 Height above Ground Level

for the works below1.50m to 4.50m below ground level

for the works upto 4.50m height above ground level

Supplying and laying of ready mix for M25 grade of concrete having charaterstic strength not less than specified in the IS 456 - 2000 using Ordinary portland cement with minimum cement content of 300 Kg / cum confirming to IS 8112. Coarse aggregates having a specific gravity of 2.60 using 20 mm down graded hard blue granite broken stone jelly and fine aggregate without flyash as per IS 383 - 1970 (2007)with suitable water cement ratio not less than 0.45 and not exceeding 0.50 of water quality confirming to IS 456 - 2000 including use of plasticizer of approved make & dosage of required grade at all locations and levels with specified high workability as per IS 1199 - 1959 (2004). The initial & final setting time confirming IS 12269 - 1987 (2004) with maximum temperature of concrete at the time of placing should not exceed 32 0 C. The admixtures affecting the quality and strength of the concrete should not be used and should confirm IS 9103 - 1979 [usual admixture - Air entraining & water reducing] including the cost of hire charges for pump and pumping charges to the required locations & levels as specified by the Engineer - in - charge,. laying, compacting, consolidation by using vibrators, finishing, watering, curing, testing charges as per IS 456 - 2000, 4031 - (Part 3 & 6)/ 1988 (2005)& (Part 2)/ 1999 (2004)and 516 / 1959 (2004 ), 4926 - 1976 (1990 ), mix design details to be got approved before commencement of the work adopting pour card system and other OK cards. Excluding the cost of form works, centering and shuttering placed in position etc, complete complying with standard specifications and as directed by the departmental officers. RCC works

Supplying, fabricating and placing in position of Mild Steel or Ribbed Tor Steel for all RCC works as per design & drawing given including cost of steel, binding wire and labour charges for cutting, bending, laying in position and tying with binding wire, etc. complete complying with standard specifications and as directed by the departmental officers

Supplying and laying with graded hard blue granite broken stone jelly of varying of size from 80 mm, 63 mm, 50 mm, 40 mm, 25 mm, 20 mm, 12 mm and 10 mm in equal proportions for formation of filter drains and filter bed as shown in drawing etc complete complying with standard specifications and as directed by the departmental officers

Supplying and filling with clean river sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and placing in position of plain cement concrete blocks of size 1.50x1.50x0.90m of M 15 grade concrete using River Sand & hard blue granite broken stone jelly of size 20 mm mixing with mixer machine and laying in rows wherever necessary, compacting, consolidation by using vibrators, finishing, watering, curing including the cost of erecting and centering including necessary support for plain surfaceses for concrete block of size 1.50 m X 1.50 m X 0.90 m using MS sheets of size 1.50 m X 0.90 m of 10 gauge stiffened with MS angle of size ISS 25 mm X 25 mm X 3 mm supported by MS flats of size 25 mm X 3 mm, conveyance to site with all labour charges etc. complete complying with standard specifications and as directed by the departmental officers

Gravel packing in gaps between cement concrete blocks including cost of gravel and filling charges to full depth and stacking for premeasurements etc complete complying with standard specifications and as directed by the departmental officers

Rough stone dry packing for apron and revetment using new stones obtained from approved sources including the cost of new stones wedges for filling the gaps, etc. including stacking the same for pre-measurement complete complying with standard specifications and as directed by the departmental officers.

Providing launching apron using new jeddy stone of size not less than 300 mm thick and weight not less than 40 Kg including the cost of new wedges for filling the gaps, finishing etc complete complying with standard specifications and as directed by the departmental officers

Gravel backing for apron / revetment / retaining wall in layers not exceeding 15 Cm thick including stacking for premeasurement, watering, consolidation and trimming the top surface so as to receive the rough stones, etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing the Cement concrete block of size 300 mm X 300 mm X 250 mm of M 15 using River Sand and machine broken hard blue granite stone jelly of 20 mm size mixing with mixer machine including the cost and conveyance of all materials to work site, labour charges for fixing the same in position and including all other incidental charges, compacting, consolidation by using vibrators, finishing, watering, curing etc complete complying with standard specifications and as directed by the departmental officers

Fabricating, Supplying and erection of Screw gearing steel shutters of size 1.80 m x 1.50m width consist of skin plate made out of 8mm thick mild steel plate and horizontally stiffened with 100x50mm mild steel channel at an interval not more than 0.50m and vertical stiffeners made out of same section at an interval not more than 0.60m and provided with 8mm thick mild steel gusset plate of required size on both sides fastened with rust free bolts and nuts etc. Conveying the fabricated shutter by using lorries including loading, unloading and leading the shutter to the vent. Dismantling the eroded shutter and shuttering arrangements by using necessary gas cutting equipment. Erecting the new shutter and the shuttering arrangements in the vent in proper position by using necessary hoisting equipment. The shutter shall be painted with two coats of Anticorrosive black paint over one coat of Red Oxide Primer. The rate including cost of materials consumables, labours power charges, conveyance charges for all equipment required conveying the dismantled materials to the section stores, cost of petty civil works, trial operation of shutter and warranty for 5 years etc.,complete.

Fabricating, supplying and fixing of Shutter Groove Angle made up of 65x65x6mm Mild Steel angle for required height including welding hold fast of size 25x25x6mm Mild steel angle 2 Nos on both sides and conveying and leading the groove angle to the vents. Fixing the angle to the grooves in proper alignment including dismantling the existing damaged groove angles, conveying and stacking at section store. The groove angle should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, consumables, labours charges for all fabricating and hoisting equipments, conveyance, petty civil works and warranty for 5 years etc., complete, etc.,

Fabricating, Supplying and fixing of Top Beam made up of 150x75mm (ISMB 150) duly drilled to suit the Head Set Assembly with required bed bolt made out of 25mm mild steel round rod duly threaded with suitable anchorage arrangements to a height of 0.60m with necessary Fish plate made out of 12mm mild steel plate of size 0.30 x 0.15m 2Nos with required holes. Conveying and leading the top beam arrangements to the work site. Fixing the top beam arrangements at the top of the vent in correct position including dismantling the existing eroded top beam, conveying and stacking and the section stores. The top beam should be painted with two coats of AC black paint over one coat of Red Oxide primer. The Rate including cost of materials, labours, charges for all fabricating and hoisting equipments, cost of petty civil works conveyance charges for labours and materials and warranty for 5 years etc.., complete.

Fabricating, supplying and fixing of 63mm dia Screw Rod made up of Mild Steel duly machined and fully threaded to suit the Head set Assembly and provided with required holes. Conveying and leading the screw rod to the worksite. Fixing the screw rod to the shutter gusset plate with required bolt and nut in proper alignment to the head set including dismantling the existing damaged screw rod,conveying and stacking at section store. The Screw rod should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours, charges for all fabricating and hoisting equipments, conveyance charges for labours and materials and warranty for 5 years etc., complete

Supplying and fixing of Head Set Assembly medium duty with hexagonal nut (Approximate 70 Kg) made up of cast iron including moulding, machining and the hexagonal nut threaded to suit the Screw Rod provided with thrust bearings for smooth operation. Conveying and leading the head set assembly to the work site. Fixing the head set assembly to the top beam by using required rust fre bolts and nuts in proper alignment including dismantling the existing damaged Head set assembly, conveying and stacking at sectio store. The Head set assembly supplied with operating key and the both should be painted with two coats of AC black paint over one coat of red oxide primer. The rate including cost of materials, labours charges for wooden pattern, moulding and charges for labours and materials and warranty for 5 years etc., complete.

De-watering of using upto 10 HP diesel engine pumpset including Hire charges , cost of Diesel , Engine Oil, Pump Operator, labour charges,Conveyance of Pumpset and fuel to site and back, loading, unloading and any other incidential charges etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing 300mm wide PVC Expansion joint in the 20mm expansion gap provided in between decks over piers and in between deck and dirt wall over abutment as shown in the drawing including cost and conveyance of expansion joints including shlimar pad and joint sealant etc., Complete complying with standrad specifications and as directed by the departmental officers.

Supplying and fixing PVC water stopper heavy duty of 300 mm width as per IS 15058 / 2001, including cost of all materials, labour charges, etc complete complying with standard specifications and as directed by the departmental officers

Supplying and placing in position of weep holes for retaining wall using 110mm Dia PVC pipe heavy duty (PVC Finolex) 4Kg/cm2 including cost of all materials, labour charges, etc complete complying with standard specifications and as directed by the departmental officers

Supplying and fixing in position of demarcation R.C.C. pre cast post in Cement concrete of grade M 15 with well graded aggregates and the nominal maximum size of coarse aggregate of size 20 mm of size 0.20 x 0.20 x 1.45 M and 0.45 x 0.20 x 0.30 m base fixing the post 30 Cm depth below ground level, the post includes using 4 numbers of 10 mm RTS main rod to a length of 1.33 M, using 8 mm MS @ 15 cm spacing as strips with steel centering and painting the post with enamel paint allround the post etc. complete and conveying the post to the site of demarcation boundary such as canal bund/water spread area etc including earth work excavation for foundation (45x45x45cm) in HSC having the base plain cement concrete of 15 cm of grade M 7.5 with well graded aggregates and the nominal maximum size of coarse aggregate of 40 mm of 10 cm thick, and the post embedded by using Cement concrete of grade M10 with well graded aggregates and the nominal maximum size of coarse aggregate of 20 mm of 30cm thick as per the drawing enclosed including cost of earth work, concrete, moulding charges, steel reinforcement, finishing, painting them and marking at top of post, etc .complete complying with standard specifications and as directed by the departmental officers

GST 18 % in Figures

Please Enable Macros to View BoQ information