RR Damages to WSS Urni in GP urni tehsil nichar Distt Kinnaur HP

Excavation in foundations trenches in earth work in all kinds of soil such as pick work, jumper work, blasting work in hard/ soft rocks, chiselling / wedgeing out of hard /soft rock including dewatering in saturated soil upto all leads and lifts stacking the excavated soil / materials not more than 3 metres clear from the edge of excavation and then returning the stacked soil in 15 centimetre layers when required into plinths side of foundations etc., consoildating each deposited layer by ramming and watering and then disposing of all surplus excavated earth within all leads and liftsas per the direction of Engineer-in -Charges.

Providing and laying cement concrete 1:3:6 ( One cement : three sand: six graded stone aggregate 40mm nominal size) and curing complete excluding the cost of form work form work in foundation and plinth within all leads and lifts as per the direction of Engineer-in-Charges.

Providing and laying cement concrete 1 : 1.5 : 3 ( One cement : one & half sand: three graded stone aggregate 20mm nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Foundation ,footing bases of column and the like mass concrete within all leads and lifts as per direction of Engineer-in-Charges.

Lintle beams girders brassumers and cantilever up to any lintle beam etc.

Providing mild / tor steel reinforcement for reinforced concrete work including bending, binding and placing in position complete up to floor two level including within all leads and lifts as per direction of Engineer -in- Charge.

Providing and fixing Zinc Aluminum steel storage tank rising capacity 100000 litrs. HDG Dome structure supporting dome roof of Zinc Aluminum including all fittings including 1 No. linear, eavy duty cage ladder GI. 1 No Nylon rope and aluminum step ladder, access hatch on root, inlet, outlet and over flow nozzies, level indicator of material approved by STAC and warranty of 10 years including fixing of three taps under the roof on out let pipe complete in all respect.

Roof Specification Roof Type:-Self Supported Doom Type Bulk Density Kg/Cum :-1000Kg/m^3 Sesmic Zone:-Zone IV Roof Angle:- 30° Wind Speed :-180 km/hr Roof Structure :- Hot Dipped Ganvanized Technical Specifications of Sheet Wall Sheet Yield strength :-300 MPA Wall Sheet Tensile strength :-340 MPA Elongation :-18% Sheet Corrugation Space :-75mm Depth:- 18mm Thickness:-0.8mm each Corrugated Sheet Make of sheet:- TATA Bluescope/JSW Sheet Galvanize Coating:- Zinc alume ZA 150 MOC of sheet:- Zincalume Technical Specifications of Liner Weight/ Sqm (GSM):-760 gsm Anti-Algae Stabilized:- Yes Both side PVC Food Grade:-Yes Thickness (mm) :-0.8mm Water Proofness :- 200 PSI Standerd Colour :- Grey Basic Febric :-High Teenacity Polyster Filment Yarn Tempreture :-20 to +60 Degree Celcius PH Range :- 3 to 13 Tasted :-2 kg/cm² for any leaks

Laying and fixing to wall ceiling and floor galvanised mild steel tube, tube fitting ( light grade) and clamps including making good the wall ceiling and floor and cutting welding of G.I. pipe with M.S. flanges table -5 where required in Inlet, Outlet, Scour and by pass arrangement of following dia.

Scour pipe 65 mm.dia

Providing and fixing cast iron Sluice Valves of different dias with hand wheel complete in all respect.

Scour pipe 65 mm.dia

Providing form work with steel plates 3.15mm thick. Welding with angle iron frame 30x30x5 mm so as to give fair finish including centering shuttering and propping etc.

Lintle beams girders brassumers and cantilever up to any lintle beam etc.

Providing and placing in horizontal layers filtering media duly graded, screened, washed and cleaned as specified by the Engineer-in-Charge.

Fine sand

Providing and laying in trenches, high density polyethylene pipes, (conforming to IS: 4984-2016) complete with fittings, (earth work in trenches to be measured & paid for separately)