REPAIRS TO ROOF ALUMINIUMWOODEN JOINERY CEILING CEILING RAILING STRUCTURAL REPAIRS RETAINING WALL MISC BR WORK IN VOLNA TOWER PEER BABA AND OTHER HILLY AREA AT NAVAL STATION KARANJA

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in sub base, foundations, fillings & mass concrete complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-2, using 40mm graded stone aggregate as in hardstanding, surface finished even & fair without using extra cement complete all as specified and as directed.

M & L for finishing concrete road, pavement with brooming all as specified and as directed

Forming contraction (Dummy) joints 50mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and as directed.

M&L plain cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed.

Demolition of brick work or stone/boulder, masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but exceeding ashlar facing and pre-cast concrete articles complete all as specified and as directed.

M&L for walling of random rubble, brought upto courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 all as specified and directed.

All as per item No. 08 hereinbefore but except stone. Note:- stone obtained from item No 07 shall be reused.

Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of RR wall brought upto courses, maximum depression n.exc. 40mm in granite or trap stone complete all as specified and directed.

M&L for raised pointing to random or polygonal rubble masonry uncoursed or brought upto course in CM (1:4) complete all as specified and directed.

M&L for PCC (1:3:6) type C1 using 20mm graded stone aggregate in coping, bed black etc including necessary form work complete all as specified and directed.

All as per srl item No. 07 here- in-before but pre-cast concrete block walling complete all as specified and as directed.

M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed.

Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate deomolitions) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Pre-cast cement concrete cover slab for manhole and drain in plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) set in cement mortar 1:4 with plain faces complete all as specified and as directed. (Note:- Reinforcement shall be measured and paid seperately)

S&F for TMT mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces in two layers and finished even and smooth with using extra cement complete all as specified and directed as directed.

M&L for rendering 20 mm thick on stone masonry surfaces or faces other than fair faces of brick work with two coats i.e (15 mm thick backing coat in CM (1:6) and 5mm thick finishing coat in CM (1:4)) , finished even and smooth without using extra cement complete all as specfified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint CAMOUFLAGE PATTERN on one coat of primer complete all as specified and as directed.

M&L prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

M&L for preparation of old wall surfaces of any description & applying one coat of acrylic (antifungal) exterior grade paint of camouflage pattern complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs / Hangars for scafolding as all arrangement.)

Demolition and breaking up drain pipes of 100mm dia (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.

M&L for 100mm dia salt glazed stone ware drain pipe laid in trenches and jointed complete all as specified and as directed.

M&L concrete bed to drain pipe for 100mm bore including packing under and haunching against the side of pipe after they are laid and tested in PCC 1:4:8 type D2 using 40mm graded stone aggregate complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M & L for Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 20 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:4) for laying floor fineshes complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M&L for green marble 17/18 mm thick machine cut in window sill, laid over cement screed, jointing and pointing with white cement slurry complete all as specified and directed.

S&F Granite tile of 20mm thick vertical surfaces such as skirting/dado,kitchen reck machine cut bedded and jointed with grey white cement slurry and pointed with white cement with add mixture of pigment to match the shade of granite stone including cutting and polishing including 15mm thick screed bed or bedding layer of mortar in CM 1:4 for laying in vertical surfaces complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20-25mm thick over cement screed bed laid over including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Dismantling of water tank capacity exc 1000 ltrs and n.exc 2000 ltrs and removing to store all as specified in SSR Part I complete all as specified and as directed.

S&F rotational moulded polythene water storage tank of 2000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed.

Taking up or down steel tubing and connections 15 mm bore complete all as specified and as directed.

Taking up or down steel tubing and connections 20 mm bore complete all as specified and as directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete all as specified and as directed.

M&L for 20 mm dia steel tube medium grade, galvanised with all fitting and fixed complete to wall complete all as specified and as directed.

S & F in repairs Bib tap15mm dia standard of CP any colour screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and as directed.

S & F in repairs stop valve of CP any colour high presure screwd for iron pipes and fixed (minimum weight 15mm - 90 gms ) complete all as specified and as directed.

Supply and fixing in repair PVC flushing cistern of 10 ltrs capacity including flush pipe PVC connection etc complete all as specified and directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, of size 580 mm x 440 mm white with integral foot rest complete including provn of cement concrete bedding and connection to trap, outgoing flushing pipe, anti syphonage pipe,CI trap 100 mm Bore of pipe etc complete all as specified and as directed.

S&F in repair white vitreous china wash down water closet pan (Pedestal pattern) with and including P or S trap, plastic seat cover closed pattern, fixing bolt etc complete all as specified and directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed complete all as specified and directed.

Supply and fixing in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

S & F in repair vitreous China wash hand basin white, flat back of size 450mmx300mm fixed on and including cast iron cantilever bracket 40x40x5mm , 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and as directed.

S&F PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete all as specified and as directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repair CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

S&F in repair 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F mild steel works as in fencing, posts & struts in fencing embedded in stone masonry/bricks works including cutting tops to shape as directed, drilled holes notching for wires flat iron fillets (for securing wire mesh etc) inlcuding all drilling, bolting or riveting etc and similar work conforming to Fe-410 or Fe-310-0 complete all as specified an directed

S&F mild steel framed work such as grills grating, parapet etc, with end of bars shouldered and/or riveted, or froged into spikes, framed guard bars, barred iron doors ladders, framed balusters, waterways, railing and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed.

S & F steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to IS 1161 1979 grade St 240 complete all specified and directed.

Dismantling of barbed wire and rolled in bundle & remove from site complete all as specified and directed.

S&F for Galvanized, 2 strand, steel barbed wire 2.24 mm dia., barbed with 2 mm dia., barbs at 75 mm spacing and strained and fixing to any type of standard rails straining bolts, etc. all as directed.1 each line wire to be measured) complete all as specified and as directed.

All as per Srl item No.62 but fixing only in repairs complete all as specified and as directed.

S & F in repair wire barbed tape concertina coil wire of 50 turn, 610 mm high having core wire of high carbon spring steel of high tensile strength and a carbon steel strip of 20mm width, 0.5mm thick having razor sharp barbs punched tape and core wire hot dip galvanized, as fixed in repair complete all as specified an directed Note : (i) Concertina coil shall be fitted to the angle iron with barbed wire. (ii) Barbed wire will be mesured and paid separately. (iii) There will be minimum 8 loops per running meter after fixing concertina coil.

Dismantling fencing wire mesh, any type all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section including taking out embedded portion in concrete complete all as specified and directed.

S & F mild steel security chain link fencing 60mm x 60mm with PVC coated mesh made out of 3mm dia MS wire and 1.00mm thick PVC coating throughout fixed to RCC/steel post including binding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm agg for fixing angle iron post etc all as specified and directed.

M&L for preparing of new steel surfaces of any decsription, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified an directed.

M&L for preparation of old painted surfaces of steel any description over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and directed.

Dismantaling to plain or corrugated MS sheet any gauge, thickness including nainital or similar pattern as in roof covering complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws etc complete all as specified and directed.

S&F 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in valley gutter, ridge hips etc. fixed with self tapping screws etc complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and as directed.

S&F for PVC false ceiling consisting of 600mm x 600mm, 5 mm thick prelaminaed self design PVC sheet of density 600kg/cum solid PVC panel insert in a frame work made using anodized aluminium T section of size (25mm x 25mm, 19 gauge or 1mm thick) in square pattern of grid size of 600mm x 600mm. The aluminium frame work is supported fom the ceiling with the help of GI hook and GI wire/6mm MS rods of required size sato maintain for proper level etc. The aluminium frame work is suppored on side wall with the use of aluminium 25mm x 25mm angles complete as per direction of Engr-in-charge, manufacturer's specification & drawing.

S&F in repairs 12mm thick ceiling board of size 600mm x 600mm of RH-70 of Armstrong false ceiling complete all as specified and directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm not exceeding 4.0 Square Metre each , removing from the site including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down of shutters of any description n exc 1 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & removing from site complete all as specified and directed by Engr-in-charge.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & refixing in same opening complete all as specified and directed by Engr-in-charge.

S & F 2nd class hard wood plain solid straight chowkats and frame of wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S & F factory made 30mm thick second class hard wood plain, framed,panelled shutters(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

Supply & Fixing factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood grain printed colour PVC sheet reinforced with MS square tube and edgeswill be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.(Make : Rajshree,Plastiwood, Sintex or equivalent as approved)

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded wood grain printed colour PVC “c” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain printed colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of wood grain printed colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick (style:)with particle board core, with 2,4 or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front Face & 2mm Plan colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.(Make : Rajshree Plastiwood, Sintex or equivalent as approved)

S&F mild steel work, Grade Fe-410-0 or Fe- 310-0, as in flat iron (for holdfast) complete all as specified and as directed.

S&F for aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading,screws etc, complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items,with and including making good to the disturbed portion with its original specifications complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal/wooden frame complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area n. exceeding 0.50 Square Metre each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden beads, area exceeding 0.50 Square Metre each pane complete all as specified and as directed.

S&F 4 mm thick sheet glass , figured glass, pinhead type , glazing with oil putty area not exceeding 0.50 Square Metre each pane complete all as specified and as directed.(Note:- Item rate shall be include any height of Bldg for scafolding as all arrangement.)

S&F for rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors etc complete all as specified and as directed.

S&F for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed. Make- Deco grill or equivalant

S&F 75mm size 6 lever brass body concealed lock with duplicate keys, fixed in aluminium doors as per manufacturers instruction all as specified and directed.

S & F Flush shutters 25mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides and both faces is covered with decorative face veneer with lipping/frame to match for cupboard complete all as specified and directed.

S&F butt hinges size 100 mm stainless steel complete all as specified and as directed.

S&F butt hinges size 75 mm stainless steel complete all as specified and as directed.

S&F Aluminium handle, cast type anodized size of handle 150 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 75mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 150 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 200 mm complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

S&F in repair 50mm PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors including bend complete all as specified and as directed.

S&F in repairs mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and brackets (wall to wall or flush to wall) for securing to curtain rod, fixed in repair complete all as specified and as directed.

M/s Vishwakarma Enterprises

Unique Associates

Shri Krishna Trading Corporation

Everest Construction

SHABARICONSTRUCTIONS