GE/PNH-67/2024-25

Amount

Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level complete all as specified and directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of reinforced (reinforcement cut as required to facilitate demolition))concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:3:6 type typeC-1(using 20 mmgraded stone aggregate) as in roof kerbs or mud stops , rounded or chamfered edges and angles, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for 20mm thick screed bedding layer in CM 1:4 for laying floor finished complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggts) as in foundation and mass concrete where required as per direction of Engineer-in- charge complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base in floor etc, complete all as specified and directed.

M&L for chequered cement concrete tiles with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set and jointed and pointed in neat cement surry in floors over and including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius in CM 1:6 all as specified and directed.

M & L for Walling of random rubble masonry, brought upto course, built in CM 1:6 complete all as specified and directed.

All as per srl item No 12 here-in-before but except stone, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of random rubble walling, uncoursed or brought upto courses, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on fair faces of brick work, stone or concrete surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified.

M&L for rendering 15 mm thick in cement mortar 1: 6 on fair faces of brick work, stone or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified.

M&L for sand filing under floor incl spreading and levelling in layers not exc 25 cm thick complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade,laid jointed pointed with grey cement and no pigments, complete all as specified and directed by Engr-in-Charge. Note: The sample shall be got approved by GE before bulk procurement & lot shall be got tested independently by the GE.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-2, using 40mm graded crushed stone aggregates as in surfaces channels and drain complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner grith in cement concrete, using extra cement including forms, moulds mitred/stopped ends etc. complete all as specified and directed.

M&L for Precast cement concrete (1:2:4) using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, shelves and similar articles with plain fair faces including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) including necessary form work complete all as specified and directed by Engineer-in-Charge.

M&L for boulder filling hand packed tightly (any thickness) at back of walls over arches etc, and raising (or lowering) to the required level compete all as specified and directed.

M& L for raised pointing in cement mortar (1:4) brought upto courses built in CM complete all as specified and directed.

M&L for applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified and directed.

M&L for preparation of old plastered surfaces or AC roof sheet surfaces and applying one coat of cement base paint, complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110 mm dia of bore single socketed, in any length with rubber ring joints, laid in trenches or in floors/walls complete all as specified and directed.

narayan construction (BID ID -3220777)

MEELU ENTERPRISES (BID ID -3214024)

M/S SEVEN LAKE CONSTRUCTION (BID ID -3214206)

Maqsood Ahmed (BID ID -3214438)

M/S MANHAS ENTERPRISES (BID ID -3219111)

M/S KHAN ENTERPRISES (BID ID -3216106)

NATIONAL TRADING COMPANY (BID ID -3214039)

VIKAS ENTERPRISES (BID ID -3220184)

M/S BADRI NATH GUPTA (BID ID -3213137)