Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹38.1 L+₹75,375 (2.02%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹41.8 L+₹4.4 L (11.8%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹45.2 L+₹7.9 L (21.0%)Rejected-Finance C O OPPOSITE BDO OFFICE MANDA AKHNOOR DISTT JAMMU PIN 181201 | JAMMU | JAMMU AND KASHMIR | 181201 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹47.1 L+₹9.7 L (26.1%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
13 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Certain repairs to plinth protection,grit plaster and other allied misc works of B Arty Bde under AGE B/R (P-1) at Faridkot Mil Stn
2023_MES_590415_1
GE FRD-16/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE Faridkot
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹1 L
Yes
27 Jun 2023
20 Apr 2023
15 May 2023
20 Apr 2023
13 May 2023
6 May 2023
Amount
Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar complete all as specified and directed
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
M&L for 25mm thick, PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.
S&F Machine cut kota stone slab in flooring ,20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
S&F Machine cut kota stone slab 18-20 mm thick as in skirting,steps,dado,& pillars, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .
M&L for cutting, rubbing and polishing of existing Kota stone flooring complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), racking out joints, hacking for key, scrubbing down with water etc ,removing rubbish off the premises complete all as specified and directed .
S&F Glazed ceramic light shade coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed
S&F Non skid light shade coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed .
S&F Non skid light shade coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed
M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base complete all as specified and directed .
M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed
M&L for Machine pressed precast concret interlocking paver block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and pigment all as specified and directed .
S&F factory made precast kerb stones of M-25 grade cement concrete including chamfers, weatherings,throatings etc in smooth finish & set in cement mortar 1:3 including necessary excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .
M&L for 75 mm thick cement concrete 1:3:6 type C-2( using 40mm graded crushed stone aggregates) as in plinth protection, finishing surfaces even and fair including forming construction joints 30mm deep x10mm wide, filled with sealing compound grade 'A' complete all as specified and directed .
S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .
S&F PVC (SWR) bends any radius ,110mm bore complete all as specified and directed.
Dismantling of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 19 here-in-before but except bricks.
M&L for plain cement concrete 1:3:6, type C-2 (using 40mm graded crushed stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.
M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
Supply only integral water proofing compound
M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge
M&L for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 25mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.
M&L for 5mm thick rough cast plaster over and including 10mm thick rendering in cement mortar 1:4 on fair faces of brick or concrete surface including preparation of surfaces and applying two coats of cement base paint complete all as specified and directed . Note : The rough cast mixture shall consist of crushed stone / fine gravel aggregate, coarse sand & cement in the ratio of 1:1:1 over the rendering coat.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over chalk whitening preparatory to distemper complete all as specified and directed.
M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of white wash complete all as specified and directed .
S&F in repair PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer's instruction etc.complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall.
S&F in repair Solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet having beading/border on top and on joints inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawings all as specified and directed by Engineer-in-Charge Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall
S&F in repair 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290- (Gde E -165) complete all as specified and directed
S&F in repair 7-8mm thick PVC laminated gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm, hangers 6mm dia (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling
Taking down old deteriorated concrete /plaster of old surfaces of facia,parapet,slab edges,projection bottom etc & applying 15mm thick rendering in cement mortar 1:3, finishing surfaces even and smooth without using extra cement including necessary scaffolding,doubing coat complete all as specified and directed. Note:-Work is to executed in buildings of height upto 15 metres and Quoted rate of the item is deemed to included the same.
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed..
S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in position including all necessary fittings complete all as specified and directed..
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed
Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed
Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening including easing and adjusting complete all as specified and directed
S&F solid PVC double door frame of size 50x95mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, edges shall be printed to match printed sheet in opening complete all as specified & directed.
S&F Factory made solid PVC moulded door shutter ,28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded with woodfree EPS PVC sheet on the front face & 2mm plain colour PVC sheet on back face to be fitted in the MS frame welded/ sealed to the style & rail with suitable PVC sheet beading and jointed together with solvent cement complete all as specified and directed
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 105mm x 60 mm including making good the disturbed surfaces as per existing complete all as specified and directed.
S&F Pressed steel frames (1.25mm sheet thickness) for doors with one or more rebates including necessary fixing lugs , hinges, lock plate, etc., size of frame 125mm x 60 mm including making good the disturbed surfaces as per existing complete all as specified and directed.
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed
M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed
S&F factory made 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of BWP commercial plywood or 12mm thick veneered particle board with commercial veneering on both faces .The size of rail and stiles as per IS: 1003(Part-1),kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed
S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc ,divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers, complete all as specified and directed
S&F Butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 (ISI marked) fixed with screws complete all as specified and directed.
S&F Aluminium anodised barrel tower bolts, 150 mm long of extruded section complete all as specified and directed.
S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.
S&F 150 mm size helical door spring fixed to steel frame by welding or with nuts & bolts/screws complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F aluminium alloy, anodised, sliding door bolt of length 300mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .
S&F Aluminium anodised barrel tower bolts, 200 mm long of extruded section complete all as specified and directed.
S&F 150 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .
M&L for Cutting holes into or through brick walls built in cement mortar and making good the dismantled portion in cement mortar 1:3 or PCC 1:2:4 type B1 as required, exc half brick but not exc one brick complete all as specified and directed .
S&F anodised aluminium frame for doors, window, ventilators with one or more rebates including joining cleat for fixing etc complete with powder coating on aluminium (minimum thickness of powder coating 50 micron) as per the specification. The top & bottom horizontal members and vertical members adjacent to walls shall be fixed with floor, ceiling, walls and cills where required and fixing with the help of rawl plug and screw or with fixing clip or with expansion hold plate fasteners complete all as specified and directed.
S&F anodised Aluminium door shutters, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (01 No), hinges type B-21, 100mm long (02 Nos), suitable handle (02 Nos) in each shutter with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
Taking down aluminium door/window shutter of any description and refixing the same after repairs and provn of fastners, hinges, rubber gasket, beading and clips etc (where required) to make the door/ window functional complete all as specified and directed .
S&F anodised Aluminium window & ventilators , side hung type without sash bars, aluminum section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws,anodised aluminium fitting such as peg stays 150mm long (01 no), hinges type B-21, 100mm long (02 Nos) suitable handle (01 No) with powder coating of any colour (thickness of powder coating not less than 50micron) etc complete all as specified and directed.
S&F for 4.8 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F in repair for 4 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .
S&F door closer hydraulically regulated, Aluminium (extruded section body), designation No 1, universal type, suitable for door shutter upto 700mm in width and weight not more than 35 kg complete all as specified and directed.
S&F double action floor door spring ,hydraulically regulated, made up of minimum 1.25 mm thick aluminium aloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other part made of mild steel heavy duty complete all as specified and directed .
S&F 3mm thick Rubber door seal of width not less than 50mm, fixed with stainless steel screws complete all as specified and directed .
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed.
S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed.
S&F in repair stainless steel solid body peg set of six,fancy type ,fixed in position with steel screws complete all as specified and directed.
M&L for welding in repairs exc 2.5 cm but n.exc 5 cm in length in metal of thickness n. exc 6mm complete all as specified and directed .
S&F in repair 150 mm size helical door spring fixed to steel frame by welding or with nuts & bolts/screws complete all as specified and directed .
S&F Aluminium anodised barrel tower bolts, 100 mm long of extruded section complete all as specified and directed.
S&F in repair brass mortice lock, vertical type, size 75 mm, 4 levers complete all as specified and directed.
Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .
Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed
S&F Steel water tubing,15mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F Steel water tubing,20mm bore, medium grade,galvanised with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .
S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .
S&F in repair 15mm bore bib taps, cast copper alloy, chromium plated with on/off handle, screwed down of iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F in repair Brass Chromium plated basin/sink mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. .
S&F in repair Stop valve, cast copper alloy,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair vitreous china Wash hand basin, white, flat back of size 550x400mm including cutting for and pinning in ends of brackets or erecting stand including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, pillar taps,fancy type,chromium plated ,cast copper alloy, with capstan head, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed.
S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.
S&F in repair 10 litres PVC flushing cistern, low level with top push button, white, including brackets & PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed
S&F in repair brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.
S&F in repair brass chromium plated soap tray, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
Taking down carefully unserviceable/ old rolling shutter (manual/gear operative) of size upto 15 Sqm, denting the surfaces as required, cleaning the guide rails, laths, top cover with the help of kerosene and greasing & oiling properly to make the system smooth /easy functional including supply and fixing new nuts and bolts as per existing size by removing old rusted nuts and bolts, necessary welding (wherever required as directed) giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work and making good the damaged brick/concrete works to the existing including painting with one coat of synthetic enamel paint on both sides of shutter complete all as specified and directed .
Taking down carefully unserviceable/ old rolling shutter (manual/gear operative) of size exceeding 15 Sqm but not exceeding 30 Sqm, denting the surfaces as required, cleaning the guide rails, laths, top cover with the help of kerosene and greasing & oiling properly to make the system smooth /easy functional including supply and fixing new nuts and bolts as per existing size by removing old rusted nuts and bolts, necessary welding (wherever required as directed) giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work and making good the damaged brick/concrete works to the existing including painting with one coat of synthetic enamel paint on both sides of shutter complete all as specified and directed .
S&F in repairs hood covers made out of 1.00 mm thick mild steel sheet including bending the sheet to the required shape and fixing the same to the rolling shutter bracket plate complete all specified and directed .
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed
S&F in repairs mild steel gear box assembly (with MS rod and handle) including connecting and fixing the gear box to wall with 4 Nos hexagonal bolts of 10 mm dia and 100 mm long after cutting into existing wall/pillar of brick work/RCC and filling back with PCC complete all as specified and directed .
S&F in repairs mild steel gear handle for gear operated rolling shutters complete all as specified and directed .
S&F in repairs cast iron pulley for 32 to 50mm suspension shafts pipe of rolling shutters complete all as specified and directed .
S&F in repairs mild steel helical wire springs (conforming to IS- 6248-1970) for rolling shutters of size upto 30 sqm complete all as specified and directed
S&F in repairs interlocking lath section formed from rolled mild steel strips for rolling shutter (of existing width ) 1.00 mm thick inclding two coats of synthetic enamel paint over a coat of primer on both sides complete all as specifed and directed .
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 106 here-in-before but except brick tiles.
Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L for rendering 10 mm thick in cement mortar 1:4 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately
M&L for applying evenly a tack coat of in industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed .
Supply and fix APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) laid over primed surface by using forced application complete all as specified and directed. Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.
M&L for lime concrete 1:2:5 (Lime:surkhi:brick ballast(40mm)) terracing in roof complete all as specified and directed
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered angles complete all as specified and directed. Note :- A Sum of Rs. 77,420.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 25 (Schedule of credit) of Tender Documents.
BANSI CONSTRUCTION COMPANY
BANSAL BUILDERS
DEEPAK ENTERPRISES
SHIV SHAKTI BUILDERS
M/S BSS AND SONS
M/S RAJESH KUMAR and CO.
BABA FARID CONSTRUCTION CO
Vinod Kumar Bajaj
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .