PROVN OF PARKING SHED WITH HARD STANDING FOR 06X A VEH AND PROVN OF FENCE WITH IRON ANGLE AT FRONT OF BLDG NO P-1 (ZONE -12) AGE B/R-I AND AGE E/M AT GE BABINA CANTT

Amount

Excavation in post holes (or similar holes) each n.exc 0.5 cum, getting out in hard/dense soil, returning, filling in & ramming earth or broken rubbles mixed with earth around in layers n.exc 25 cm and removing surplus soil complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete and embeded post complete all as specified and directed by Engr-in-Charge.

S & F mild steel work as in posts and struts in fencing cutting top to shape, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or reveting etc and similar work conforming to FE-290 Grade E-165 complete all as specified and as directed.

S&F Welded steel wire fabric, cut to length, bent to shape as required and tying with and including fixing/welding to steel members, weight not exceeding 4Kg/Sqm etc complete all as specified and as directed.

M&L for preparation of new steel surfaces and apply two coat synthetic enamel paint over one coat of red oxide primer of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed.

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint complete all as specified and as directed.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed.

M&L for painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Removing excavated at a level n.exc 50m m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and as directed.

Hard core of brocken stone or boulder of gauge n exc 63mm deposited, spread and levelled in layers n exc. 15 rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C1 ,using 20 mm graded crushed stone aggregates as in sub base of path laid in alternate panel , joint filled with bitumen 85/25 , surface finished even and fair complete all as specified and as directed.

Supply and lay 50mm thick river bed sand free from sharp materials a for Sand cushioning including watering and consolidating using mechanical vibrator complete all as specified and directed .

M&L Machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness M-40 grade with grey cement & pigment and jointed in bedding layer in CM (1:4) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (ussing 20mm graded stone agg) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, etc complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed by engineer in charge.

S&F steel work ( tubular pipes,square/round as in vertical posts, rafters/purlins framed using ERW or induction butt welded including tubular pipes (medium) for supporting tubular/square pipe rafters/purlins special shaped washer etc complete all as specified.

S & F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc complete all as specified.

M&L Cement concrete 1:2:4 type B2 (using 40mm graded stone agg) in foundations/sub base, filling and mass concrete complete all as specified and directed.

M&L for old size brick work with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6) etc complete all as specified and directed.

M&L renderig 15mm thick in cement mortar 1:6 over fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L, Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L, Mild steel bars 5mm dia & over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending for columns, hooking for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips as in stirrups complete all as specified and directed.

M&L for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in beams & columns for Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

Excavating over areas, n exc 1.5m deep and getting out in any type of soil complete all as specified and directed.

M&L, 100 mm thick soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rollled and consolidated to required camber and gradient complete all as specified and directed

M&L 150 mm thick (compacted thickness) WBM in two layers, each 75 mm thick with stone coarse aggregate of grading 2 (63 to 40mm ) spread, rolled and consolidated to gradient material and camber required complete all as specified and as directed

M&L cement concrete work in pavement/hard standing of flexual strength 40Kg/per Square centimeter in field using 400kg of cement per cubic meter, thickness of concrete 25cm or less including form work complete all as specifed and as directed.

M&L stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide the 150mm deep and sides dressed; bedded in cement mortar 1:3, 20mm thick; joints grouted in cement mortar 1:2 with an admixture of metallic floor hardner, 5% by weight of cement and struck flush complete all as specifed and as directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc flat, fair finished surface complete all as specifed and as directed.

M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary for work complete all as specifed and as directed.

Returning, filling in trenches with excavated soil, including, spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dolly with 3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed .

Description same as per item No 88 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

Description same as per item No 88 above but One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

Description all as per item No 88 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and as directed.

S&F switch piano flush button type 15 Amp single pole one way complete all as specified and as directed.

S&F socket outlet 2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and as directed.

S&F ceiling rose,surface bakelite 63 x50mm three terminals complete all as specified and as directed.

S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 4 ways 240 volts complete all as specified and as directed.

S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , 'C' series, connected with copper lugs complete all as specified and as directed.

S&F Rigid non-metallic PVC conduit 25mm dia(external) ISI marked concealed and including cutting necessary chases on wall/ceiling surface for drawing of conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed .

Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 10 sqmm 2 core as per IS 7092 Pt-I complete all as specified and as directed.

S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, connected with copper lugs complete all as specified and as directed.

Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm, factory made of specified make , complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts , wells, cesspit, manholes, pipe lines, pier holes etc n exc 10Sqm on plan and n exc 1.5m in depth & getting out in any type of soil complete all as specified and directed.

Removing excavated at a level n.exc 50m m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and as directed.

S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification.

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into conduit (Existing / new) including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of 6 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately.

Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge.

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

M/S Chadha Brothers (BID ID -3114186)

DEVENDRA ENTERPRISES (BID ID -3134434)

MAHTAB ALAM (BID ID -3134981)