Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.6 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹43.3 L+₹6.4 L (17.3%)Rejected-Finance | L2 | Rejected-Finance Being L2 |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Alwar
GE Alwar
COMPREHENSIVE REPAIR WORK FOR MES INSTALLATIONS, KEY PERS QTRS AND PERIODICAL SERVICES FOR MD ACCN UNDER AGE B/R-I AT ITARANA, ALWAR
2022_MES_552440_1
8097/E8
Open Tender
Civil Works
Item Rate
240 days
Alwar
As per NIT
3 documents required · 3 mandatory
₹500
Yes
GE Alwar
₹90,000
Yes
25 Nov 2022
16 Sept 2022
17 Oct 2022
16 Sept 2022
15 Oct 2022
1 Oct 2022
16 Sept 2022 - 30 Sept 2022
Amount
Demolition cement concrete (unreinforcement) in ground floor and paving n exc 15 cm thickness (below or above ground level) & removal complete all rubbish materials as directed by Engr-in-Charge and all as specified.
Dismentling floor, hearth or wall tiling including cement mortar or cement mortar bedding (but not backing) and rubbish off the premises.
Demolition of brick work built in cement mortar.
M&L for brick work with old size flyash bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6.
M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 mean radius, built in CM 1:6 except brick.
M&L for brick work with old size flyash bricks, straight or curved on plan to any radius, built in 1:4 as in half brick thick wall complete all as specified and directed.
Taking down cement or cement lime plaster, of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as directed by Engr-in-Charge and as specified.
M&L for rendering 15mm thick in CM (1:6) on stone masonry surfaces or surfaces other than fair face of brick work as on wall surfaces and finish the surface even and smooth without using extra cement.
M&L for rendering 15mm thick in CM (1:4) on stone masonry surfaces or surfaces other than fair face of brick work as on wall surfaces and finish the surface even and fair. Using Water proofing compound @ 3% by weight of cement (WPC shall be measured and paid separately)
Supply only Integral water proofing compound.
M&L for rendering 5mm thick in CM (1:3) as in ceiling and finish the surface even and smooth without using extra cement.
M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 pigmented stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Payment for providing grooves shall be made separately).
Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden attens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge.
M&L for preparing newly plastered surfaces & applying three coats of white wash on walls.
M&L for preparing newly plastered surfaces & applying three coat of white wash on ceiling..
M&L for preparation of newly plastered surface of wall & applying two coats of cement base paint over a coat of primer chalk whiting, complete as specified and directed.
M&L for preparation of new plastered surfaces of wall & applying two coats of distemper oil emulsion white or tinted over priming plastered surface with alkali resistant priming paint complete as specified and directed.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of white wash complete all as specified and as directed by Engr-in-Charge.
All as per description of serial item No 18.00 here-in-above but on ceiling surfaces.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coat of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old treated surfaces of walls, plastered or unplastered and applying one coat of cement base paint of approved shade/tint. complete all as specified and as directed by Engr-in-Charge.
M&L for glazed ceramic tiles (coloured) in vertical surface 350mm x 250mm x 7mm / 450mm x 350mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and directed.
M&L for 10mm thick cement plaster in CM 1:4 on other than fair faces of brick work or stone surfaces of walls to receive tiles etc.
M&L for screed bed or bedding layer 15mm thick in CM 1:6 for laying floor finishes.
M&L for 25mm thick PCC 1:2:4 type B-1 (using 12.5mm graded aggregate) as in levelling coarse of fllors and roof.
Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified and directed by Engr-in-Charge.
M&L for non skid ceramic tiles (coloured) 7 to 8 mm thick (square/ rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile all as specified and directed by Engr-in-Charge.
All as per item No 28.00 above but on vertical surface.
M&L for machine cut kota stone slab flooring 20-25 mm thick over cement slurry base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M&L chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey pigment cement and pigment.
M&L virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match
M&L for kota stone slab 10-15 mm thick in riser step, skirting, dado etc complete all as specified and as directed .
Taking down shutter of any decription exc. 1 Sqm and n. Exc 2 Sqm each and refixing in same opening including easing and adjusting and also refixing builders hardware as required including renewal of unserviceable scews etc. Note: Dismentling of old chowkat and S&F new chowkat shall be measured & paid for separately.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm.
S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm.
S&F in repair pillar taps, cast copper allow with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot or Cold' long screwed shanks and fly nuts, screwed for iron pipe and fixed bore of pipe in 15 mm dia complete all as specified and directed
S&F ball valves, high pressure of PTMT with epoxy coated aluminium rod and heigh density plastic ball screwed for iron pipe and fixed of 20 mm dia minimum weight 210 gms of including taking down existing ball valves any type all as directed by Engr-in- Charge
S&F 15mm dia bib tap cast copper alloy fancy type chrominum plated crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule and fixed as fixed in repair.
S&F in repair 15 mm bore stop valve or angle valve cast copper alloy, fancy type chromium plated, screwed down high pressure with capstan heads, screwed both ends for iron pipe or for union.
S&F in repair 15 mm bore stop cock with crutch or butterfly handle, screwed down high pressure , screwed both ends for iron pipe or for union.
S&F in repair waste coupling of PTMT (half or full threaded) suitable for WHB/Sink bore of discharge pipe 40mm (Minimum weight 60 gms)
S&F in repair 32mm dia PVC flexible waste pipe 80 cm long with socket for WHB/Urina/Sink complete all as specified
S&F in repair 15 mm bore angle valve chromium plated screwed down high pressure with capstan head screwed both end concealed type for iron pipe or for union complete all as specified.
S&F in repair PVC flushing cistern low level 10 ltr cap with inlet ball valve float and handle syphonic action type incl brackets and flush pipe of polythene of low or high density ISI marked.
S&F in repair vitrous china squatting pan of ORISSA patterns 'long pan' Size 580mm x 440mm white with 'P' or 'S' trap front of back inlet and foot rest including long band any pattern (excluding flushing cistern and flush pipe) including provision for lime concrete bedding.
S&F in repair WHB flat back of SIze 580x450mm excluding taps waste chain plug stopper but incl brackets incl waste pipe cutting pinning in ends of brackets complete.
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or incluidng fixing contilever brackets and connecting union to pipe over all size 495mm x 420mm bowl size 410mm x 330mm x 160mm.
S&F in repair vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl white sheet cover etc complete
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 15mm bore pipe.
Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 15mm dia.
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 15mm dia complete to walls and ceiling or laid in floors of 15mm bore.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 20mm bore pipe.
Refixing old steel tubing and connection in new or old position (walls,ceiling,floor etc) bore of pipe in 20mm dia.
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 20mm dia complete to walls and ceiling or laid in floors of 20mm bore.
Taking up or down steel tubing and connections including cleaning for refixing or removal to store 25mm bore pipe.
S&F tubes medium grade 'galvanised' with and including all fitting and fixed bore of 25mm dia complete to walls and ceiling or laid in floors of 25mm bore.
S&F in repair shower rose 125 mm size chromium plated with or without swivel joints including fixing to GI pipe or union
Taking down shutter of any decription exc. 1 Sqm and n. exc 2 Sqm each.
Taking down door chowkhats with shutter (without taking off shutters from frame)of area n exc 1.5 sqm each.
All as per item No 61.00 but area exc. 1.5 Sqm and n. Exc. 4 Sqm each.
M&L 35mm thick factory made plain framed, panelled door shutters klin seasoned & chemically treated second class hard wood (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I).The shutters shall be fitted to chowkhats as directed by Engineer-in-charge.
S&F 35mm thick 2nd class hard wood rail and style factory made glazed and skeleton door shutters,kiln seasoned and chemically treated second class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.The sizes of members of shutters as specified in SSR Part I, The shutters shall be fitted to chowkhats as directed by Engineer-in-charge.
S&F solid PVC door fFrame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing.
S&F factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made of out of MS tube for top & bottam rail m.s frame shall be covered with heat moulded plain colour pvc 'c'channel having a pvc sheet stripp of 20mm width stuck inside with solvent cement for style & plain colour pvc sheet for top rail,lock rail & bottam rail on either side & as gap insert for top rail & bottam rail, pannelling of plain colour pvc sheet fitted in m.s frame welded sealed to the style & rail with suitable pvc sheet bedding,& jointed togather with solvent cement S&F in the frame at site as per specifaction & drawing.
S&F mild steel cupboard shutter with frame, Godrej pattern made out of 22 guage mild steel sheet including chromium plated MS handle with proper locking arrangement (brass mortice lock vertical type size 65mm 4 lever with escutcheon plates & two keys) with & including two coats of spray painting with synthetic enamel paint of approved tint over a coat of red oxide primer including fixing with 6 Nos 12 mm dia bolt 150mm long grouted in brick wall/concrete including making good the disturbed surface as original complete all as specified and as directed. Note :- The measurement shall be taken of front elevation and not girthwise.
Taking down steel window/ventilators not exceeding 1.5(without taking off shutter from frame including guard bars) any description.
Taking down Steel window/Ventilators exceeding 1.5 sqm but not exc 4 Sqm (without taking off shutter from frame including guard bars) any description.
S&F exctruted aluminum alloy with galavanisied mild steel hing pin Butt hinges 100mm long.
S&F factory made steel window with side hung shutter and box type hinges steel handle and steel peg stay with glazing bars dovetailed or welded .
All as per item No 71.00 above but without glazing bars.
S&F factory made steel ventilator with top hung shutter with glazing bars including hings, steel peg stay etc complete.
S&F 200 mm long mild steel barrel tower blots, stove enamelled black, with bright bolt and fixed.
S&F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed.
S&F 300mm long mild steel sliding door bolt, bolt type, stove enamelled black,with bright bolt 12mm dia with and including a minimum of 6 bolts and nuts,four on bolt plate and two on staple plate fitted to shutters complete.
S&F mild steel pressed steel handle,ovel type stove enameled black of size 150mm (ISI Marked).
S&F butt hinges,medium weight, cold rolled, mild steel,100mm long,fixed to angle iron chowkhats including welding complete.
S&F aluminium handles cast type andoized of size 125mm complete all as specified and directed.
S&F in repair powder coated mild steel drapery rod of 20 mm inner dia (in lengths as directed) of approved colour with & including decorative finial at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 or E-165
S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintel hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps,plate washers and similar small articles conforming to Fe410-0 or Fe 310-0
S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples
All as per item No 84.00 above but fixed in repair.
M&L preparation to new or previously untreated wooden surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
M&L preparation to new or previously untreated steel surface of any description,over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chromate primer.
Hacking out old broken glass (any thickness size,quality or description)from wooden frames or stone, concrete or brick surroundings, and fixing new glassglazed with putty or fixed with beads. . Note:- Sheet/figured glass will be measured and paid separately under supply only.
Taking out old interlocking tiles and refixing machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade as directed by Engineer-in-Charge.
Supply only 4mm thick figured glass pin headed type and glazing with oil putty in square n.exc.0.50 Sqm in each pane complete all as specified and as directed.
Supply only sheet glass,ordinary quality,4mm thick and glazing with oil putty in square n.exc.0.50 Sqm in each pane complete all as specified and as directed.
M&L PCC 1:3:6 type C-1 using 20mm graded aggregate 50mm thick as in plinth protection course surfaces finished even and smooth without using extra cement.
M&L for cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 4 mm thick in floor complete all as specified and as directed.
Supply only glass dividing strips 3 mm thick and 38 mm width.
M&L for 20 mm thick granite (of any type) tiles machine cut, bedding and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing icluding 15mm thick screed bed in CM 1:6 complete all as specified and as directed
M&L for 20 mm thick granite (of any type) tiles machine cut, in skirting/dado laid over cement screed and jointing with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 10mm thick rendering in CM 1:4 for recieving stone etccomplete all as specified and as directed
M&L for running welding in repair, thickness of metal to be welded not exc 6mm all as specified & directed
M&L for running welding in repair, thickness of metal to be welded exc 6mm but not exc 9mm all as specified & directed
S&F in repair PVC (SWR) 'P' trap 110/110 mm bore.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm pipe.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 75mm pipe.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 110mm pipe.
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls of 110mm pipe.
S&F in repair PVC (SWR) bend 75mm bore of any radius with access door.
S&F in repair PVC (SWR) junction single (single T) of 110 mm bore with access door
S&F in repair PVC (SWR) branch piece single (Single Y) of 75 mm bore equal or unequal
S&F in repair PVC (SWR) bend 110 mm bore of any radius.
S&F in repair PVC (SWR) bend 75 mm bore of any radius.
S&F in repair PVC (SWR) vent cowl of 110 mm bore.
S&F in repair PVC (SWR) floor trap with grating inclu jointing with solvent with cement of 75 mm bore.
S&F PVC (SWR) gully trap 125/110mm, setting and jointed with solvent cement.
S&F in repair MS clamps fixed to walls on both sides of pipes with plastic raw plugs and 50mm size steel screws.
Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition) all as specified & as directed.
M&L for reinforcement cement concrete 1:2:4 type B1 using 20 mm graded crushed stone aggregate in slabs supported on walls beams and columns in floors, roofs, shelves and like. Note : Reinforcement & form work shall be measured and paid for separately.
Formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exc 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete.
Formwork to edges of concrete flats, roofs, floor slabs, landings and similar work, not exc 200 mm thick (Horizontal or sloping) for rough finished flat surfaces of conccrete.
M&L for reinforcement TMT bars 10mm dia overcut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified.
Cutting holes in brick walls Exc half brick but not exc one brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed.
Cutting holes in brick walls not exc Half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar etc for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 TYpe B1 as required complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20mm graded aggregate as in cills, coping steps, tank staging, sesmic and other similar courses, lacing courses parapet and railing upto 60cm ht kneeler kerb and alike including weathering, slightly rounded or chemfered angle and throating as directed.
Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil.
M/L cement concrete type C-2, 1:3:6 ( 40 mm graded aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.
S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0 complete all as specified and directed.
S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fuitte3d with washer and one hexagonal or square nuts exceeding 50mm and n exc 75 mm long dia of the shank 16 mm complete all as specified and directed.
Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire.
Supply only chain link MS galvanised fencing any size or type weight n exc 4.00 Kg.
S&F mild steel MS round bar 10 mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed) complete all as specified and directed.
M&L cement concrete 75mm thick 1:4:8 type D-2 using 40mm graded aggregate as in sub base of floors complete all as specified and directed.
M&L for interlocking tiles 60mm thick (M-35) having compressive strength not less than 35N/MM2 with grey cement and pigment pigment on 25 mm thick sand layer all as speicided and directed.
M&L precast kerb stone built in PCC TypeB1 1:2:4 using 20mm graded stone aggregate and fixing in CM 1:4 all as specified and directed by Engineer-in-Charge.
Providing sand stone 5cm thick as in sun shed , chajjas, sheleves etcset and pointed in cement mortar 1:4 complete all as specified.
Cleaning and removing all scale and dirt etc from tanks 250 to 500 L and from mouth of circulating pipe etc complete all as specified and directed by Engineer-in-Charge.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as directed by Engr-in-Charge.
M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) as in roof padding, laid to a minimum consolidated thickness of 25 mm as leveling course, laid and compacted in min slope 1:30 over roof complete all as specified & directed by Engr-in-Charge.
M&L for flat iron as in hold fast, hooks, cleats welded to angle iron door/window frames etc complete all as specified and directed.
M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings, cooler stands (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floor in PCC 1:2:4 type B-0 to match the existing floor.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed by Engr-in-Charge.
M&L for Steel work in tubular trusses, posts, purlines including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified & directed by Engr-in-Charge.
S&F stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. to confirming to IS 116-1979 grade (medium grade all as specified and directed.
M&L screed laid 15mm thick in CM 1:4 with water proofing compound over green concrete surface(WPC will be measured and paid seperately) surface finished even and smooth (without using extra lime or cement) complete all as specified& directed by Engr-in-Charge.
Preparation of roof top surfaces, providing and applying UV stable single component smart care damp proof ultra is a fibre reinforced elastomeric liquid applied water proofing membrane formulated with PU hybrid polymers and reinforcing acrylics fibres and having SRI of 106 on top of concrete roof surface in three coats including self primer at ratio pf damp proof and water 3:1 and coverage @ 1 Ltr /10 sqm with a thickness of 650micron. Note: 6 Hrs interval between two coats will be maintain& the work will be carried out through company applcator duly got approved from Accepting officer in writing before incorporation and paid only after receiving of the warrenty certificate from the company. Make : Asian paint or equivalent as approved by GE. Note : The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer instructions.
S&F anodized aluminium frame and other sections for doors, windows, ventilators, partitions, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.
S&F anodized aluminium door shutters, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as handles 2 Nos in each door, hinges type B-21 100mm long (3 Nos), complete all as specified & as directed.
S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, powder coated of any colour as approved (Thickness or powder coating not less than 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.
S&F 5.5mm thick sheet glass ordinary quality in squares exc 0.5 sqm each pane complete all as specified & as directed.
Treatment for sunken portion is as follows:- M&L for water proofing treatment in sunken floors as described hereunder :- 1) Demelotion of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl vertical wall surface complete as directed. 2) PCC (1:2:4) type B0, covered filling in sunken portion 75mm thickness shall be provided at the junctions of RCC slab and adjoining walls. 3) Sunken floor and sides upto finished floor level shall be plastered with 15mm thick plaster in CM 1:4 wixed with WPC@ 3% by weight of cement. 4) Applying bitumen primer of sunken floor & side surfaces TANKMASTIC of M/s STP Ltd @ 0.40 ltr/Sqm. 5) Sunken portion shall be filled with lean concrete (1:5:10), Type E-2 using 40mm aggregate after carring out of satisfactory testing of CIpipes/Joints & Slab/walls by filling water 72 hrs. The sunken portion of Nahani trap/floor trap and pipes, joints shall be emmbeded in PCC (1:3:6) blocks. 6) GI Spout pipe 32mm dia and 450mm long cross cutted ends shall be inserted at the time of repair to Sunken portion as directed. Note:- i) In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. This process of grouting and testing shall be repeated till leakage/seapage/dampness is elimaneted. ii) Horizontal flat area only measured. iii) Above aspets are deemed to be included in quoted rate.
M&L for brooming down old decorated surfaces of walls, plastered or unplastered including cornices, plasters etc and applying one coats of colour wash complete all as specified and as directed by Engr-in-Charge.
M&L for complete removing washing, rubbing down and stopping of old decorated distempered and painted surfaces of walls, plastered or unplastered including cornices, plasters etc and applying two coats of oil bound distemper of approved shade/tint complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted wooden surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr-in-Charge.
M&L for preparation of old painted steel surfaces over 10 cm in width or girth and applying one coat of synthetic enamel paint on old painted surfaces, complete all as specified and as directed by Engr-in-Charge.
M&L for complete removing washing ,rubbing down and stopping of old decorated surfaces and painted surfaces of walls ,plastered or unplastered including cornices plasters etc and applying two coats of exterior plastic emulsion paint over a coat of priming paint of approved shade/tint complete all as specified and as directed by Engr-In-Charge.
M&L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of acrylic emulsion paint (exterior grade) of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty. complete all as specified and as directed.
M&L for preparation of old plastered/concrete surfaces and applying one coat of synthetic enamel paint of approved shade/tint complete all as specified and as directed by Engr-in-Charge.
M&L for writing letters or figures (Block, Roman, Itslic or Indian) n. exc 30 cm height with thick synthetic enamel paint. complete all as specified and as directed by Engr-in-Charge.
M&L for complete removing of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salt, trading oil greasy spots etc on old decorated surfaces of wall and applying two coats of oil bound distemper of approved shade/tint over a coat of primer over and inclucluding 1 mm thick Birla white wall care putty. complete all as specified and as directed.
M/s Laxmi Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .